Jump to content

How Would You Sort Out This Case?


jnash

Recommended Posts

I soaked some of the rusty tools I bought including the tweezers recently in vinegar and a little salt and it got off most of the surface rust.  They were not as bad as that case but I think it worked out well after some #1 and #0000 steel wool.

 

EDIT: I also neutralized the vinegar with a baking soda/water soak before using the steel wool.

 

DSC02693.JPG

Edited by BlakeL
Link to comment
Share on other sites

hi j, i always soak my things like that in wd40 or similar for maybe looking at yours for about 2 or 3 days changing it as necessary and then finishing off with the wire wool, it dont look like you will damage any plating, come back and show us what it comes out like, could be interesting

Link to comment
Share on other sites

I am not sure what it's called in english . But something with Oxalic acid in . I used beatroot juice once . Black tea would do also . it will naturalize the rust and make it black . The rust particles will fall off .

Edited by rogart63
Link to comment
Share on other sites

This is not something I have tackled in horology, but I would have thought there were plenty of rust proprietary rust removing products that would do the job. Once you have pickled the rust out of the case, it would require a lot of power and hand work to get (if possible) a smooth finish on the inside and outside of the case before any playing could be applied.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I'm guessing, but this commercial demag machine maybe produces random magnetic fields to re-randomise  the iron particles. So heres one for you, synthetic rubies are coloured predominantly with chromium oxide . But natural rubies and old synthetic watch rubies were also coloured with iron oxide in higher percentages than chromium oxide. Which gave them a degree of.................🤔
    • I've never had a hairspring distort on me by passing the movement or just the balance in a plastic pot over this demagnetiser. Have you seen how fast a cleaning machine spins to spin-off fluid and that does no harm to a hairspring. I was a little concerned when I first used it, thinking it might be too strong, but I was wrong. It is strong, but it does no damage. I pass the part over the demagnetiser and keep going for about an arms length, so about a metre, to properly demag the part.
    • I don't think you would be able to find spare parts. Your best bet would be to get a new movement from eBay. https://www.ebay.com/itm/256508500506?itmmeta=01HY3M863PSA61GK7B859QCWTE&hash=item3bb9191a1a:g:ubgAAOSwrJJgPP-s&itmprp=enc%3AAQAJAAAA4DxWhpiQiz2ZjKpm3PS%2FHPh4IafsSzMWEobc2q4qQWgPGMZ8kCR8y2PRsm7GE31FjeSDYSWcEyGlrpZEdQyyzOSgsgsaPjbP7dYmK8r49Nh%2BEtSqDDIZ8Tbp3vvX035fFXgcjc1GEH8l%2FOWJ9aTeWNGzeBgUwqyhJ3ZSXji50TQr6rd38Sqwaqsj2oc51UVKqqIKySKTfxVB7X09EXcJsmeYc5GCdVODNkb02q2RsxfSIzpgl9dFCmW1Ih%2BPg2j2NziSELg5AfaHl%2FPU2Zn9fNnoVN1Z1NUAREyh2BCubcWC|tkp%3ABk9SR_bhoPTwYw
    • Here's a thought. Try unscrewing the bezel and the crystal. If you have one of those sticky balls for undoing casebacks, I would give that a try.
    • Last week I noticed my Eco-drive's second hand was stopped at 12 o'clock. I left it in the sun for a few days and no change, so I figured it was time to replace the rechargeable battery. I've had this guy for at least 15 years. Replaced the battery and the seconds hand moved to about 5 o'clock and stopped there. I let it sit for a day in the sun, no change. I took the battery out and tested it, and it's at 1.4v. The old one was at 1.0v. I'd like to test if it's charging. I've been looking around for diagnostic info, but only been able to find the owner's manual. Anyone have a reference for it?
×
×
  • Create New...