Jump to content

Swiss emperor


Recommended Posts

Pretty much know that already, was wondering if anyone that knows anything about watches can tell me how old it Is, why its heavy, ect not to bothered about the cost as its more sentimental value. Was just curious.

Link to comment
Share on other sites

The Swiss Emperor brand was registered in 1959 so it's no older than that.

Swiss Emperor was a decent quality brand targeting the better end of the lower price range watch market. Not budget, but very much aimed at the average wage, possibly on a par with the Seiko 5 range still marketed today.

The styling suggests that it's from around the late '70's or early '80's. The stainless steel back suggests that the bezel is gold plated (solid gold bezels usually come with solid gold backs) if you look closely you may find it is stamped between the strap lugs with something like "GP20" or "Plaque 10" indicating the gold plating thickness in microns.

(Silly me... integrated strap so no strap lugs as such, but there could still be a stamping beneath the strap)

At a guess it probably houses a Peseux movement. These were very popular in two hand or sub-seconds dress watches of the period due to their thinness.

It's a nice looking 40-ish year old dress watch that should be capable of good performance if it has been maintained.

Edited by Marc
correction
  • Thanks 1
Link to comment
Share on other sites

Looks like a 1970's/ 80's with an attached bracelet which is a bugger if the bracelet breaks or gets damage, very bad design. The movement is just standard swiss, anything other then round and you have problems with dirt getting in.  

  • Thanks 1
Link to comment
Share on other sites

57 minutes ago, Dandan said:

Pretty much know that already, was wondering if anyone that knows anything about watches can tell me how old it Is, why its heavy, ect not to bothered about the cost as its more sentimental value. Was just curious.

Sorry,  yes sentimental, invaluable it is.

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi everyone on my timegrapher it showing this do a make anymore adjustment someone let me know ?    
    • Maybe I'm over simplifying this and I'm a little late to the discussion, but just by my looking at oil when I use it on a treated cap jewel  the oil stays in one nice bubble, but when I don't it spreads out to the edges of the jewel. I'm not sure (but could well be wrong) but the analogy of a waxed car and rain is accurate in this case, the wax is very hydrophobic and repels the water, however, the process epilame works by is a different physical process based upon cohesion/adhesion (oleophilic) not repulsion (oleophobic)  at least as far as I have read/observed. If one were to use a oleophobic substance equivalent to wax (hydrophobic) then one would need to create a donut shape to fence in the oil, however if one used such a strategy with a epilame which is oleophilic then the oil would sit on the ring of the donut and not in the 'donut hole', exactly where you don't want it. Even if the oil is smeared then the oleophilic epilame should pull it back to the center (see diagram below). Reference
    • Looks lint the teeth on the hour wheel aren't meshing with the teeth on the calendar intermediate wheel, maybe the hour wheel is sitting on top of this instead of meshing?        
    • If the oil drop was freely standing on an epilame treated cap jewel it could easily slide off if you knocked the watch hard but the balance pivot keeps it in place. 
    • Latest 404 is this Baron which has a copy of a Seiko 66B movement in it, handy when I needed to find a replacement setting lever. Apart from the setting lever, crown, stem and new crystal (original was cracked) the watch is original. Finished result:
×
×
  • Create New...