Jump to content

Hello to one and all.

Humbucker
 Share

Recommended Posts

Humbucker New Member

Humbucker

Posted
Posted

I'm a newby and not even sure that I'm intrducing myself in the right place!

I'm Phil, live in the North West of England and retired. I've loved watches since childhood and now, at this time of my life, I've decided to delve into the mysteries of horology and self indulgence.

I've spent loads of money on equipment and literature, and have become engaged in Youtube watching (sorry about the pun) endless dis and re assembly of all sorts od time pieces. I've just disassembled a Seiko 6309 and reading up on cleaning methods using an ultrasonic heated bath.  I'm quite excited really because I used to service all the family vehicles before Post Polio Syndrome put a stop to that! Well, that's my excuse anyway! What I'm trying to sayis that I've always enjoyed repairing mechanical things, and time pieces are just very small engines, of a sort.  Sorry to have waffled on. I hope you're not too scathed. I'm hoping to contribute in the future and it would be great if I could take advantage of the wealth of knowledge floating around this particule bit of the ether.  Thanks for reading this and I hope you are all taking care and being as safe as possible. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      Looking for advice on removing the glass and bezel

      By VWatchie · Posted

      @Jon The link is no longer working and I wanted to see that demonstration again. Is there any chance you can make it available again? I'd appreciate it!
    • mikepilk
      DIY centre seconds support base

      By mikepilk · Posted

      Or, if you have a staking set or jewelling too, just use one of the stumps. You can choose a fine tip to fit inside a jewel if necessary.
    • Knebo
      Rolex 3130/3135 Automatic winding issue

      By Knebo · Posted

      Good morning,   To be honest, I'm not sure I trust my own logic anymore 😅. But here's a picture of my own (failed!) attempt to install a new rotor axle. I punched way to hard and even split the metal of the rotor. My thinking was that, in my case, the axle sits "deeper" in the rotor and hence the rotor would be closer to the movement plates. Vice versa, I was thinking that a very light punch could cause the rotor to sit rather high. But not sure that makes sense because in both cases, the flat part of the axle and the rotor align equally.     Sorry, but is he saying that the outside of the caseback has been polished to such an extent that the inside of the caseback has deformed/sunk??? That sounds crazy to me because those casebacks are thick! Can you see any signs of that on the inside of the caseback? Have you tried screwing in the caseback a litte bit more or less so that the supposedly "sunk" part of the caseback would move from 9 o'clock to e.g. 6/7 or 11/12 o'clock?  If the caseback is truly deformed, maybe it could be punched/pressed back into shape (e.g. with glass/caseback closing press).      I agree with your choice. But yea, Rolex makes it VERY hard for independent watchmakers to do a perfect job because we can't get (original) parts easily.      Your pictures aren't too bad. But still impossible to see if the rotor isn't perfectly flat. You'd have to look at it with your loupe, from the side (like the pictures), and turn the rotor to see if the gaps (with the automatic bridge plates) increase/decrease.     Finally... how is the up/down play of the rotor? To test, take a toothpick/pegwood and press on the small triangular side of the rotor next to the axle (NOT the big side where the weight is. But the opposite side.). Does that lift up the weight-side of the rotor? There can be some play, but it should really be minimal. If there's too much play, a new spring clip is the first thing to do. After that, one could play around with the jewels. This is too much:
    • Waggy
      DIY centre seconds support base

      By Waggy · Posted

      could start a new sub-brand: Bergeon-Pro Worked for Apple phones! Ah they already beat me to it:  
    • CYCLOPS
      A recovering collector..

      By CYCLOPS · Posted

      Hello, those RR pocket watches are nice watches, there are still parts around...
×
×
  • Create New...