Jump to content

Show us your blue dial watches.


FLwatchguy73

Recommended Posts

  • 4 months later...

I just got this Croton Tropartic with a blue linen dial. Has an AS 1951 caliber. Haven't had time to investigate too deeply into the apparent paint loss. The seconds hand is red as on the 2nd pic; having trouble getting the color correct on the pictures. This dial is well balanced I think. 782174470_DSCN51832.thumb.JPG.f8dc8019f32fd2c6ddaff83df9e0924e.JPG692488772_20230422_2214093.thumb.jpg.12060fd9c5f4f8c39801d7b4e25acc11.jpg

  • Like 3
Link to comment
Share on other sites

NewCrystalCaseRefinished.thumb.JPG.b99968305756e8706734c391522d426f.JPG

RIMG0951.thumb.jpg.26e3e022ff1fd867882da811dfda3cbb.jpg

This Sekonda with a Seiko day/date movement was in a bit of a state (which is why it also qualifies as a 404 club member).

The deep blue sunburst dial changes hue, depending on the light.

AsPurchased.png.53813317a451e210f2ebf076007b5694.png

This is how it looked in the ebay listing, so a new crystal and a case re-finishing was needed to make it presentable.

I have to confess that I managed to crack the first replacement crystal I fitted, while re-fitting the case back.
I was too lazy to check, and find the correct die, so I used one that I assumed was big enough.
Obviously it wasn't.
We do things right 'cos we do them twice. 🙄

  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...
  • 3 weeks later...

Here is another one like above but with the bezel. The nato strap is actually more comfortable than the original blue strap in the photo above. My original intention was to take the bezel off of this one and put it on the watch above. However it did not quite fit and I wonder if the crystal is keeping it from easily pressing onto the case. Either way I don't want to force it.DSCN53702.thumb.JPG.e1a0146f82fdbbd7bcf4816f0946a76c.JPGDSCN53712.thumb.JPG.d6d915328933068d215c620b74fd3bd4.JPG20230711_2154062.thumb.jpg.6f2fa882cd9cec117c2a00891f9e29f8.jpg

Link to comment
Share on other sites

  • 4 months later...
  • 4 weeks later...
  • 3 weeks later...

My latest. 1973 Bulova Sea King HH. Looks more like the dial shot with the gray. The camera must be picking up a tan color and not the gray for some reason.DSCN5689.thumb.JPG.f0ffd2490342abf425f4e5a81f83deff.JPGDSCN56822.thumb.JPG.65c27415f50176270fdac7a76246cf3c.JPGDSCN56852.thumb.JPG.c782e4306401e7101eb688767a45d760.JPG

And the obligatory 10:10 shot!

20240107_2209522.thumb.jpg.19da1315c0b69cf4cae3678fd86583a6.jpg

 

Edited by Razz
Added photo.
  • Like 4
Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • Back home...printing now.  Will report results
×
×
  • Create New...