Search the Community
Showing results for tags 'ladies'.
Found 4 results
Hello and good afternoon to all. OK, here is another little horological teaser for you to get your heads around. I have this great OASIS lady's (?) B270 watch that I got in a set to be repaired. It actually only needed a battery and works great. However, the strap DEFINITELY needs replacing! AND here is my problem. I just CANNOT figure out HOW to get the spring bar out. Actually, I am not sure it IS a spring bar. I have tried hard with all manner of tools (spring bar removers, screwdrivers, sharp knives etc.) to get the spring to release, but no joy. I took the strap off by hand, so you can see the photos to see what I have. I really HOPE it IS a spring bar, but if so, HOW to get it out?? And if it is NOT, then HOW to fit a new strap on other than by glue? Also, as an aside to all this, does ANYONE know how to set the date on this watch? But first things first eh! As far as I can tell, there are NOT two positions that you can pull out the crown to. But I could well be wrong.
Hello there watch fix fans. Here's (I hope) an interesting one for you. I have this beautiful small ladies 'Fero Feldmann' Swiss-made watch - it came in a bag of "used and to be repaired" watches. From what I can see, the mechanism seems in very good working order. Just a slight shake and it goes and goes. There is no strap, but that is not the issue here. The problem is the stem and/or crown. As you can see, there is definitely no crown. But I am wondering about the stem. The watch does have its case and edoes have, as you can see, a hole where the stem and/or crown will/should fit in. There is something which appears to be some kind of part-stem at the 3 o'clock position. Using tweezers I can pull it out and push it back in quite freely. A very small screw on top holds this "stem" in place. I think you can see, in ths second photo, how this "stem" attaches to the rest of the movement. Clearly I need to attach a crown. BUT what about a stem? A stem extension? Or one of those crowns which has an extended stem-like attachment which should fix onto this current "stem" in this watch? Yes, the watch face is somewhat scratched, and the minute hand is a little bent at the top. You may say it is not worth my while trying to get this fixed. But I just SO MUCH like this little watch and would LOVE to give it life again! It clearly IS still "alive" - though I'm not sure if it is a mechanical wind-up or an automatic. The latter of these seems to be the case - as I said earlier, a little shake and the mechanism goes and goes. PErhaps with a little oil (and lots of encouragement) it can be made good. So my main question - what kind of stem/crown to attach and how to do it?
Hi there watch repair experts and fans! My first time here so please be gentle with me It concerns the ladies watch you see in the pics and, in particular, its rather unusual metal bracelet strap. I want to make the strap a few links shorter. Normally with metal bracelets it is, of course, all about pushing out the pins, taking out the bits of the bracelet you don't need and then putting it all back together. But THIS one has a weird-looking two-section bracelet which, as far as I can see, is held together by very small screws (?) from each side and no pins involved. Obviously I am wondering what to do to get the pins/screws out. Another thing of course i that I will have to take one link from either side of the bracelet. Anyone seen a bracelet like this before. HOW to do this adjustment?? I hope you can see what you need to in these photos.
I have a dear little vintage wrist watch. The movement runs well and the 2nd hand turns (it is on its own small dial) but the hour and minute hands don't turn unless the watch is face down.. You can set the time easily, but then they don't move when face up. Any help would be most welcome.