Jump to content

SEIKO SPORTS 150 Help Please

Danny69

By Danny69
in Watch Repairs Help & Advice

 Share

Recommended Posts

Danny69 New Member

Danny69

Posted
Posted

Firstly thank you for accepting me and hello to you all on this wonderful forum. I am new new new super green to this wonderful new hobby. 

BUT. First attempt at repair has ended in disaster so I would so Appreciate any advice or wise words anybody could offer. I have a wonderful 90s Seiko Sports 150 hairloom. The push buttons were a bit sticky and stiff so I thought I’d have a go at stripping it down. 

Back taken off. Both winders removed. Trouble removing watch movement. 

Anyway now I’m in a terrible state the movement won’t fit back into the case because the push buttons are in the way so the face and movement won’t drop in. Then all the hands fell off and I’m in way past my depth. I feel absolutely devastated because I think I’ve ruined what was passed down to me. 

As you can see. Classic case of don’t run before you can walk. 

Any advice would be so so appreciated but please keep it simple. 

Thanks so much everyone and sorry to be a pain. 

Danny. 

Melt WRT Addict

Melt

Posted
Posted

You need to remove the pushers and the movement will drop in. 

The hard bit is getting the C clip back on the pushers after.

Be patient and take a deep breath. 

 

  • Thanks 1
Johnnie Super WRT Addict

Johnnie

Posted
Posted

Hi Danny, stop beating yourself up, go have a break and relax! You with the assistance of many of the learned guys on here will fix it. ( not me through):D What you have to do is listen to them, don't guess, stop doing anything until someone brighter than I comes along. I doubt you will have to wait very long. Good luck. PS, the man that never made a mess up never did anything.

  • Thanks 1
ramrod Super WRT Addict

ramrod

Posted
Posted

pictures would help a bit.

the pushers are locked in by the "C" clips AFTER the movement is installed. it's easy to get frustrated and worried that you messed it up. it happens to us all. just relax and it'll go.

 

  • Thanks 1
clockboy Distinguished Member

clockboy

Posted
Posted

Its best to post pics as there are many movements, but similar assemblies apply to the many of them.  It makes it easier to give sound advice with a pic or two.

  • Like 1
  • Thanks 1
Danny69 New Member

Danny69

Posted
  • Author
Posted

Thank you all so much for the time you have taken to reply. I’m going to take the wonderful advice being given. 

Step back and take a breath. Purchase some decent tools, lighting and most importantly digest as much information on this new hobby as possible. 

Ive safely put the Seiko in a box until knowledge warrants my return. 

Thanks so much for everything and I will come back with an update. 

Take care all. Danny. 

 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • MikeEll
      Help with repairing a quartz clock

      By MikeEll · Posted

      I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...