Jump to content
Lawson

Carl Zeiss - Eye Mag Pro

Recommended Posts

With all the talk of Long Arm Microscopes to add in watch repairing, I too have been looking into optical solutions to use.

I find after many hours using a standard loupe my dominant eye gets a little strained ... not to mention having lack of depth perception whilst working.

 

I was at my Dentist the other day, and she was using a pair of Carl Zeiss Stereo Optics to aid her, and I asked if I could have a look through them .... WOW OH WOW!! 

Simply stunning vision!!  So clear, and with a huge "exit pupil" things were nice and bright to boot.  The only issue was the focus length ... as they were set for dental work @ 500mm (19.68inches).  But I definitely wanted to know more!!

 

So I called Zeiss in Australia, and explained my needs.  They were incredibly helpful and supportive to my inquires ... it's truly a shock to receive old style customer service these days, but that's what I got from Zeiss.  So much so that they sent a rep to my house with a demo pair for me to loan for a week or two: like I said old style customer service at it's BEST!

 

Here they are ... the Carl Zeiss EyeMag Pro F.

 

post-246-0-97033600-1412334374_thumb.jpg

 

post-246-0-07526100-1412334380_thumb.jpg

 

post-246-0-50735100-1412334377_thumb.jpg

 

These ones are 4x power, with a focal length (FL) of 300mm (11.81 inches), which is not from the end of lens, but from your forehead ... so you can take the length of the lens out of the equation.  These are a little bit too far away from the work I think; and I mentioned this to their rep.  He suggested to keep them for a week, and if he found a set with a close FL he would contact me.

 

Not 2 hours later he called and said they had a pair of 5x with an FL of 235mm (9.25 inches).  That sounds about perfect to me.  They will be shipping them out to me, free of charge, to test for a few weeks.   Just amazing service!!

 

So I'll keep you all updated on the outcome.

Share this post


Link to post
Share on other sites

Yeah, they're not cheap ... but cheap gear isn't good, and good gear isn't cheap.

 

Remember, these are fully Titanium construction, with lifetime warranty.  The rep was telling me that some spinal surgeons have been using similar optics from Zeiss for over 30+ years, and they are still covered under warranty.

 

This, to me, is an investment in my eyesight (comfortable, fog free, stereo vision, with high quality German Lens), and product I will be enjoying for decades after I've forgotten about the initial cost.  As long as the "5x @ 235mm (9.25inches)" lens work well, I'll be putting the money down on them.

Share this post


Link to post
Share on other sites

Those are powerful reasons Lawson. If you put it that way I guess I would do the same in your place! As for me, at this time, I will wait a little and of course since you have the opportunity to test it for free, I will await impatiently for your review of the item. This will be in my wish list for now...well at the top....pending wife approval! :(

 

PS. Maybe if Zeiss knows about this forum they might consider a discount for forum members! :)

Edited by bobm12

Share this post


Link to post
Share on other sites
bobm12, on 04 Oct 2014 - 2:23 PM, said:

I will await impatiently for your review of the item. This will be in my wish list for now...well at the top....pending wife approval! :(

 

It will be a very unbiased review Bob.  I've already told the rep that the current ones I have are not "fit for task" because they are a bit long in the focal length @ 300mm (11.81 inches).  I should be getting the pair set @ 235mm (9.25inches) to test, next week.  I will be testing them on an ST96, ETA 2540, and a pocket watch before I'm satisfied they will do the job.  So they will be put through the paces.

 

At this point I am impressed by firstly by the customer service of Zeiss: with the lengths they have gone to, and their willingness to help a single individual with an unusual request, and the quality and finish of the product.  The ONLY thing that's stopping me from buying them is the focal length of the optics, but this is paramount to my purchase, and has to be spot on.

Share this post


Link to post
Share on other sites

I know you'll be fair Lawson, it goes without saying! By the way, will you be able to try it with a lady's movement like the Seiko 4205? It would be interesting...and more/new service pictures/review!!! :)

Share this post


Link to post
Share on other sites

The testing is done, the verdict is in.

I have run the Zeiss - Eye Mag Pro F 5x @ 235mm (9.25inches) through their paces on many watches, including several Analog Quartz movements with very small gear trains.

So what do I think? ....

 

 

These are the BEST optics for working on watches bar none! I will never, and I mean NEVER, go back to using a standard monocular eye loupes again; except on inspections that require the extreme magnification of a 20x to 30x loupe ... which is rare.  The clarity is so good that I don't even have to swap to a higher power loupe to locate the tiniest of pivots, even the tiny rotors in Quartz analog movements ... this set does it all.  I have shown them to several professional watchmakers, who have been in the trade for decades (some as much as 50yrs), and they are astounded by the Eye Mag Pro's clarity and comfort, and are looking into getting themselves a pair.

 

Believe me when I say there is nothing like working with stereo vision that moves with your head movements, and gives complete depth perception at all times.  If you can afford to buy them, DO IT!  And if you can't afford to buy them .... SAVE! :)

Share this post


Link to post
Share on other sites

Thanks for the the report Lawson, it's good to know they are the business for doing watch repair. Did you find the weight to be an issue if they were worn for long periods of time?

Share this post


Link to post
Share on other sites

Did you find the weight to be an issue if they were worn for long periods of time?

 

Hey Geo,

 

Not at all my friend. 

They are completely Titanium, including the frames. 

And if you have a look at the nose piece of the frames they are very well padded in soft rubbery plastic.

Share this post


Link to post
Share on other sites

Just received my optics from Zeiss, delivered directly to my work :)

 

IMPORTANT NOTE: The magnification/optical length ratio is no longer a stock item at Zeiss (note they are black instead of the new silver look) ; BUT they still have old stock of the 5x @ 235mm which they are heavily discounting at the moment to clear the NOS!  I saved AU$1340.00, nearly a 50% discount!! ... so if you want a pair ORDER THEM NOW!

 

Here's my invoice:

post-246-0-99788700-1414798323_thumb.jpg

 

Here's the stock number of the optic to get the ones that are discounted:

post-246-0-44378000-1414798321_thumb.jpg

 

They come in a very sturdy case that will keep them well protected

post-246-0-67820200-1414798315_thumb.jpg

 

Picture of the inside of the case with my new Eye Mag Pro F optics

post-246-0-87903000-1414798318_thumb.jpg

 

 

Share this post


Link to post
Share on other sites

Here is my cheapo solution: 6x magnification 370mm working disatance - $275 plus shipping.

Flip Up Prismatic Loupes 6.0X Titanium Frames.  Ref. Nº F-T-6.0X

From CareOptical (China)
http://www.optical-world.com/optical-loupes-flip-up-prismatic-loupes_c8

The optics are excellent but I would have liked a shorter WD.

 

post-374-0-83393000-1414848628_thumb.jpg

I am buying these more comfortable eye glasses to replace the supplied Ti frames.
UVEX I-VO 9160-120 Safety Glasses / Spectacles - Clear Lens + Head Band

 

post-374-0-32019100-1414848647.jpg

 

Share this post


Link to post
Share on other sites
On 11/1/2014 at 2:32 PM, cdjswiss said:

Here is my cheapo solution: 6x magnification 370mm working disatance - $275 plus shipping.

1

Happy with your solution? I'm (more than) tempted to give it a try. Working distance is specified to 340mm. Did you measure 370 mm or just a typo? Thanks!

Share this post


Link to post
Share on other sites

Got in touch with a representative for Carl Zeiss in Sweden to ask for the current price of Lawson's setup. Approx. USD $2000 excluding tax :startle:

Hmm... think I will go with the Chinese "cheapo solution" when/if I want to try this out.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Hi All I'm a beginner.  I've finally competed my Seiko 6119A in a Seiko 5.  I now notice that the second hand tube is quite long.  It's not sliding down the shaft with moderate pressure.  How had should I push?  Is there a trick to this? Thank you    
    • Hello guys, I have some problem with my seiko 7015 speedtimer that i bought 2 days ago.. This seiko runs smoothly when chronograph off And when the chronograph is active,the watch runs for awhile and then stop.. Whats wrong with it and maybe you guys can help me with some solution please!! thanks
    • Hi Len thank you for the detailed reply. I tried a 329 today and unfortunately did not work. As you explained before it looks like the rotor is ocillating back and forth (the second hand moves forward and backwards).  Its heartbreaking to see as i was hoping to fix it and give back to my grandfather. is there anyway i can source the part or an alternative movement (does not have to be Omega) that will fit the dial and casing?Although not ideal as takes away from the integrity and beauty of the watch but would love to able to get it working one way or the other so my grandfather can wear it on the wrist again. any help would be much appreciated  regards   57253616986__A7C2CEC7-1ACC-483F-933C-D73C742B77C7.MOV
    • For what its worth, the watch would originally have looked more like this.
    • A little bit of a fun watch  for today's Watch of Today.

      Another Swatch rescued from the junk pile. This one had a couple of obvious issues.

      The leather band was filthy, heavily kinked, and stiff as a board. So much so that had to be scrubbed with detergent, dried, and some leather restoration work carried out. The watch itself however, as well as the usual heavily scratched crystal had an electro-machanical issue. When I popped in a brand new battery, the second hand would move for a bit, then falter. This turned out to be a combination of slight corrosion on the spring contact for the battery, and the fact that someone had previously run the watch with a tiny button cell, wedged in place with some scrunched up paper, which had bent the sprung battery contact.  A little very careful re-bending and off it went like a champ. This illustrates the point nicely, that even a little extra resistance in the battery contacts can be enough to stop a quartz movement, or make it behave erratically. The band took a little more effort. Once dried, following its bath, it became obvious that the original uniform kid leather look was long gone, so I went for a more vintage finish, with a little blending of the very worn patches using the leather dye in some dark tan shoe polish, combined with some lighter "Clarks Shoes" branded leather restoration cream. I only needed a hint of the dark tan, since I didn't want to end up with a brown shoes effect, simply to shine up the worn patches, and blend them with the existing colour.

      Several thin coats of leather cream mixed with a little dark tan, and much buffing later and the strap is back to its original soft calfskin feel, rather than dry as a stick. All of the holes are the same size again. The band forms a gentle curve, rather than being corrugated, and the stitching is clean.  The band looks ten times better than when it arrived. This is yet another member of the "404 Club", since it was effectively free with a bunch of other junk, I picked up which was purchased because it included a mechanical watch that I have yet to restore, all for under the magic £4.04
×