Jump to content

New Videos Uploaded Folks :) Rolex 3135 Movement

Mark

By Mark
in Watch or Horology Related Videos

 Share

Recommended Posts

Lawson Super WRT Addict

Lawson

Posted
Posted

Awesome as usual Mark!

...and just in the nick of time, I was nearly going to enter therapy for "Watch Repair Channel" video withdrawal disorder ... or WRCVW for short :p

 

That Rolex Movement is simply gorgeous.  Even the quality of the jewels they use are clearly superior to the mainstream movements I've worked on.

 

Thanks again for uploading more videos Mark, they are a most excellent training resource and an inspiration us guys to become better at watch repairing.

Link to comment
Share on other sites
WillFly Distinguished Member

WillFly

Posted
Posted

Just great - well worth waiting for! I know very little about the inside of Rolexes, and the videos demonstrated the complexity of the movement and the superb quality of the parts. You can see why they cost what they do.

 

Many thanks, Mark - a nice treat for a Thursday morning.

Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
  • Author
Posted

Thanks guys :)

 

 

BTW Mark ... where's the into music?

I think you play the piano very well, and I enjoy the little intro music at the beginning of your vids ... it's very fitting.

 

I heard a lot of stories about YouTube copyright infringement notices even on peoples own content - then I got three myself, the music was my own composition but there are deaf ears when you try to contact them. A lot easier to just omit the music :)

Link to comment
Share on other sites
WillFly Distinguished Member

WillFly

Posted
Posted

Thanks guys :)

 

 

 

I heard a lot of stories about YouTube copyright infringement notices even on peoples own content - then I got three myself, the music was my own composition but there are deaf ears when you try to contact them. A lot easier to just omit the music :)

I got two of those notices. I just told them that they'd got their information completely wrong. They were trying to tell me a traditional tune was copyright!

 

Ignore them.

Link to comment
Share on other sites
matabog Super WRT Addict

matabog

Posted
Posted

Hello!

Very nice movement there!

 

I've seen in your videos that you put the main plate into the washing machine together with the balance. But also with the jewels and spring on. 

 

Question: How does the interior of the jewels and the balance pivot get cleaned? I think it works for you, I didn't see any dirt when you oiled the cap jewel :) but how slick is the washing machine/fluid that it gets in there between the jewels and the pivot and cleans them?

 

Thank you,

Bogdan

Link to comment
Share on other sites
omgiv WRT Addict

omgiv

Posted
Posted

Hi Mark,

Great job on the new videos. I had a great time watching them last night (much to the confusion of my wife). I have a couple of questions if you don't mind.

I had never seen the cover mechanism disassembled before or any documentation that it can be disassembled. How difficult is it to disassemble it and does the disassembly affect the longevity of the part. I have always been bugged by the part because I never feel like I can oil it properly. Seeing your way makes much more sense.

I was also wondering why you oiled the teeth of the reversing wheels. All of the documentation I have seen put out by Rolex states not to oil anything on the reversing wheels except for the post and pivots. Just curious as to your experiences and if this has met with good results. Thanks again for the great vids and advice!!!

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      I suppose it would depend upon what your lubricating with those? for instance what does the manufacturer say about those lubricants? I have a PDF from the manufacture and a rather peculiar statement found on the bottom of the chart. my suspicion is the reason the recommending would be without epilam the HP oils like the spread except when they're in Ruby jewel's with steel pivots. tableEN lubrication 2020.pdf
    • oldhippy
      Is this a 'hack' ?

      By oldhippy · Posted

      These types of hairsprings become weak with age and very fragile. Which I expect it is that giving you trouble, and that wheel is not the correct one, if it were not bent I don't think the movement would run as the teeth are not the correct height. The problem you have is price which depends on you. It can be repaired but is it worth it to you, because there is little value in the clock. A wheel can be made and hairspring replaced. Or hang on to it and keep looking on ebay which is your best bet for replacement parts or even a complete movement but it will be like finding a needle in a haystack. 
    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      I did that also for a few movements - well, mainly in/around the train jewels. I made big efforts to epilame the mainplate WITHOUT getting Epilame into the Pallet fork jewels (where it's not supposed to be, right?). I made litte barriers with Rodico around that jewel and used drops from a syringe to apply on the rest.  However, I've now stopped doing this. For three reasons: 1. It's a hassle and consumes more of this liquid gold. 2. I didn't see the need when using HP1000/HP1300 lubricants and grease for most part. The two places where I'd use 9010 (i.e. escape wheel and balance) receive Epilame in specific places... or the cap-jewel-setting of the balance suspends the oil sufficiently be capillary action (see my "conflict" about using Epilame on the balance jewels).  3. Lastly, and here I really wonder about yours and others' experiences: I felt that applying Epliame to the train jewels left them looking hazy (borderline dirty) compared to the (painstakingly achieved) sparkly clean results of my cleaning process. I just can't help but think that the Epilame residuals would mix with the oil and cause more friction/wear. I don't know.    simple: it'll stay there. It won't move any further. That's exactly what is happening if you epilame a cap stone. You end up placing the 9010 right on top of the epilame and the oil will sit nicely on that spot.
    • Neverenoughwatches
      Coil for old Seiko Credor -- 4002920

      By Neverenoughwatches · Posted

      There are some parts on Ebay for the seiko 6020A, it may just be a waiting game for someone to strip one down, NOS will be more scarce . K would strip your movement down to the module then start looking at other seiko movement to see if that coil is used, then seek out a seiko part dealer. Also Retrowatches youtube owner Mike may give you some advice try him on his site . He also hangs around amateur watchmaking groups.
    • Waggy
      Setting lever spring

      By Waggy · Posted

      I would agree, in order to work harden something you need to exceed it's yield strength when it moves from the elastic zone to the plastic zone and you get permanent deformation and work hardening which is fairly close to its failure point, relatively speaking and dependent on the material/alloy of course. In theory you can load something constantly within its elastic range and not suffer work hardening issues.
×
×
  • Create New...