Jump to content

Hi From Munich

colinh

By colinh
in Introduce Yourself Here

 Share

Recommended Posts

colinh WRT Addict

colinh

Posted
Posted

Hi,

 

I'm not exactly a noob: I took apart my Dad's automatic[*] when I was 5...

 

... and I've been a hobbyist goldsmith for about twenty years, so I already have experience with fiddly little things (like diamonds[**] pinging across the room) and also have some of the equipment.

 

 

[*] reassembling it is on my list of Things To Do.

 

[**] diamonds are easy to find: darken the room and crawl around the floor with a torch. The wee little things SPARKLE!!! :-)

 

 

Anyway, in the meantime I have a whole pile of nice watches:

 

A Longines automatic: my first "proper" watch. I'd just started work and got an advance on my salary (weird, but that's how it was). I was walking along the shopping street with a literal wad of cash in my pocket. Did I invest it in gold? Shares? A house? No—I bought a watch. Oh well...

 

Next, a Movado (museum watch?) : very flat, and just one gold blob at 12. Extremely accurate, but very imprecise :-)

 

Later, an Omega Seamaster Chronograph: Ah. At last. A *real* watch. COSC certified, no less. A "chronometer". Costs significantly more, because it's been so well tested and everything. Unfortunately, by the next day it had gained 17 seconds. I took it back, and they adjusted it. Six months later the stopwatch stopped working. I took it back, it got sent to Omega, and they fixed it. A few years later and the stopwatch has stopped working again... Now there's confidence-inspiring Swiss quality for you.

 

While it was being fixed (this took a while) I saw, and couldn't resist, a Fortis Cosmonaut's Official Chronograph (with the Lemania 5100 movement). My favourite, but not working at present.

 

At the moment I'm making do with a Sinn UX (in black) and a Sinn U1 in Deutscher U-boot Stahl grey.

 

Oh, I nearly forgot: I've got some ghastly thing by a little company called Erbe. It says sapphire crystal on the back, although the front, as I now know, is normal mineral glass. Hmmph. But, it does have a Valjoux 7750 movement inside, for which I'm planning/designing my own case.

 

 

So, I have a pile of watches, some of which I'd like to try my hand at servicing. Having seen some of Watch Repair Guy's extremely good and inspiring videos, I've ordered some tools etc and will try TimeZone's first online course.

 

 

colin

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted (edited)

Nice introduction Colin! Welcome to the forum From Scotland, I'm sure you will find the information that you require here.

I visited Munich three years ago when I was on a continental motorcycle holiday with my pal. We stayed not far from the Hirsch Garden and and drank quite a few of your excellent German beers, what a massive place that was. For those that don't know the place, there is outdoor seating for about 8000 people and it has a small truck to collect the empty glasses!

post-124-0-25440800-1410935594.jpg

Edited by Geo
Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Welcome to the forum Colin and to the TZ classroom where I sit once in a blue moon but like a lot! Very nice online class, highly recommended. My suggestion is, take all 3 in parallel if at all possible. There is also an online (free this time) Seiko class on the internet. Short but enough to get you started in an inexpensive movement. No matter what you do, good tools are essential.

Link to comment
Share on other sites
colinh WRT Addict

colinh

Posted
  • Author
Posted

Thanks Geo, Will, Bob.

 

The Beer Gardens really are nice in the summer. In a few days the Oktoberfest starts, which is sort of nice. On the one hand 7500 slightly (to extremely) drunk, but good-natured people, all in one (big) tent (there are about a dozen tents) can be interesting. On the other hand, there are sometimes just too many people. It's like those videos of the Tokyo subway at rush hour, except outside.

 

OK, looking forward to the course(s). Good tools have been got :-)

Link to comment
Share on other sites
colinh WRT Addict

colinh

Posted
  • Author
Posted

I just noticed that I've been grossly unfair to my real first "proper" watch, which I found in a drawer yesterday.

 

It's a BWC manual wind watch I got for my 7th birthday from my grandparents. I loved it and wore it every day until the onslaught of the digital watches took its toll in about 1980. To be honest, I quite liked my first digital watch too.

 

Still, I never lost it despite many house and country moves. After decasing it and replacing the winding stem it suddenly works again :-) The acrylic watch glass is broken and one of the watch strap spring bars got replaced by a bent piece of a paperclip. My first watch repair as a pre-teen :-)

 

This nice little watch will be my first victim :-)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      Seiko 6601 Tech Sheet?

      By JohnR725 · Posted

      yes I noticed the new site and I miss the old site. It's the unfortunate problem of the Internet here today gone tomorrow sometimes some of the stuff gets backed up and sometimes well it does not then the problem with the early Seiko's were there were not necessarily designed for distribution across the planet and as such there is no customer support for them. So trying to find early stuff like technical information or sometimes even parts list for older Seiko is is problematic. But I did find you a you tube video. A quick look he seems to take a heck of a lot of time to actually get to the service single I did not watch all that but it does look like he did disassemble or started to say there's a tiny bit here  
    • HorologyHead
      An intro…

      By HorologyHead · Posted

      RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • Endeavor
      New balance staff not riveting to balance

      By Endeavor · Posted

      The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
    • Mercurial
      AS2063 - hand setting

      By Mercurial · Posted

      Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Khan
      Stem broken - can it be rescued?

      By Khan · Posted

      Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
×
×
  • Create New...