Thin Spring Washer

[WildBill]

After reassembling my FFST 96 movement I have a thin spring washer over (or shim) I don't know where it go's...I can only guess it go's on the hour wheel

and watch face....see picture     IMG_3228.JPG   Thanks Bill..

 

[WildBill]

Sorry about picture upload, "cant seen to manage it".....

[WildBill]

Managed  to get a picture uploaded...

[Chopin]

Yes that's a simple one. It goes on the pictured wheel and below the dial. I believe they call it a dial washer.

[WildBill]

Thanks.... my guess was right...but had to make sure... 

[vinn3]

you could a book on watch repair.  they often have dissembly diagrams.  vin

[WildBill]

Hi Vin, can you give me a title of the book that might apply ...Thanks...

[StuartBaker104]

Donald deCarle’s books are a pretty good start Practical watch repairing is pretty old, but is a contemporary of the watches many of us work on.

The dial washer you have there looks a bit mashed. It should be gently curled along one diametral axis and fitted this way up:  http://ticktickticktick.com/wp-content/uploads/2014/04/flieger-08-e1398649245424.jpg

[Mark]

Moving to the help and advice section.