Jump to content

Citizen 6031 Movement Question

PJA

By PJA
in Watch Repairs Help & Advice

 Share

Recommended Posts

PJA WRT Addict

PJA

Posted
Posted

Hello there. My wife has an old Citizen 6031 watch which probably hasn't been used for at least 10 years (was belong to her late father) and after changing battery and not getting any reaction I've taken it to a repair and the gentleman basically put a drop of some liquid on it which made it works for about 5 minutes and then stopped working again. My question is could it be that the oil dried after many years of not working or how to go about trying fixing it? I have ordered a new equivalent movement which I am waiting for, but for my practice I just wanted to try to fix it even though it doesn't pay. Thank you for your assistance.

Citizen_6031-G08644_YO.jpg

Link to comment
Share on other sites
Chopin Super WRT Addict

Chopin

Posted
Posted

Quartz movements can and certainly should be serviced just like mechanical ones. But we're usually talking about quartz movements that were made to be serviceable (so not the cheap chinese plastic ones...).

I would say that this one can be serviceable and you could certainly give it a try. I find them a lot more simple than most mechanicals.

Only wish they were larger in size as it's a fiddly job.

This type of movement could also require short circuiting it to start.

  • Like 1
Link to comment
Share on other sites
PJA WRT Addict

PJA

Posted
  • Author
Posted
53 minutes ago, Chopin said:

Quartz movements can and certainly should be serviced just like mechanical ones.

I would say that this one can be serviceable and you could certainly give it a try.

 

Thank you.

Link to comment
Share on other sites
PJA WRT Addict

PJA

Posted
  • Author
Posted
2 hours ago, Latvas said:

Have you tried line release cleaning

 

No, I haven't. I am just starting now with this hobby and not even know where to start, but can you give me a few words about how to go about it? I was trying to search it and can't find anything about it. Thank you.

  • Like 1
Link to comment
Share on other sites
Neileg WRT Addict

Neileg

Posted
Posted

Most quartz watch testers have this function. It creates a spinning magnetic field that drives the watch mechanism at speed. This can be enough to break loose old crusty oil or slight corrosion and get the watch running.
It's a bit quick and dirty as watch repairs go but can be very effective especially if the watch has been sitting unused.
Neil


Sent from my iPhone using Tapatalk

  • Like 2
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
7 hours ago, Latvas said:

go to ebay, and search for , quartz line release.


Sent from my iPad using Tapatalk

Line release is a novel way to release a gummed up quartz movement. However it does not offer a long term fix. I would relace the movement.

  • Like 1
Link to comment
Share on other sites
PJA WRT Addict

PJA

Posted
  • Author
Posted
12 hours ago, Latvas said:

I was searching for line release tools and correct me if I'm wrong, as I see it only the Horotec Turbo spins the dials while the others do only battery check like with multimeter without opening the back case?

Link to comment
Share on other sites
  • 6 months later...
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      No John, we don't want Mark to change anything, we are just scared of losing a brilliant forum and losing contact with each other.  As pointed out, this forum is full of knowledge and I for one,  consider the regulars friends. I would hate to lose contact with you and the others.   PS, this forum is really important to me. 
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      one little minor problem with your chemistry experiment here which is what exactly is epilam? In other words is it an exact substance with the chemical you specify or is it a term? For instance originally it was steric acid either dissolved in some sort of solvent or it was applied by vaporizing it. Then now it's all kinds of different things the watch companies all have different ideas there's a whole bunch of patents. So is not always an exact substance.   let me snip out a image from the patent that I attached up above. Notice I highlighted something it seems to disagree with your evaluation.  
    • nevenbekriev
      Pocket watch escape wh

      By nevenbekriev · Posted

      I guess You had to try, as it would be hard to sleep without that try, but, I know the result before the experiment... As I told before, the friction will be so big that the wheel will not turn. The pivots have to be thin and polished - the bigger the number of the wheel (2th, 3gh, 4th...), the thinner the pivot. What You are trying to do is possible, but forming the new thin pivot must be done on lathe. Thus the wheel will get shorter, but can have new pivot without the drilling for normal standard repivoting. Then piece of brass can be soldered under the pivot hole in the bridge and new hole drilled in it to form the new bearing.  Well, this way is not the recommended one, not quite correct, but it is possible to do for the excersize... When I say lathe, lathe may be verry simple, someting like turns, but made of what one has in reach of his hands. If You want to try, I will try to guide
    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      yes by all means let's gather up our weapons tar feathers find the nearest tree in case Mark is not agreeable to our terms on our demands and storm his Castle. I don't quite understand what you're trying to do here? In other words you want Mark to somehow guarantee that the group will live on forever no matter what? You want Mark to somehow change his business model of what is trying to do or should we just take the group away from him? oh and is quite possible that Mark never realized that his discussion group would take on a life of its own. That the members of the group would like to continue on forever.  
    • RichardHarris123
      Second hand watch market.

      By RichardHarris123 · Posted

      I'm not sentimental, I see it this way.  I inherit something I  don't like, I could sell it, buy something I do like and remember the person with the new item.  For example, I  inherit a watch ( I haven't), I don't like it, I  buy a watch I do like, every time I look at the watch, I think of the person. 
×
×
  • Create New...