Jump to content

Citizen 6031 Movement Question

PJA

By PJA
in Watch Repairs Help & Advice

 Share

Recommended Posts

PJA WRT Addict

PJA

Posted
Posted

Hello there. My wife has an old Citizen 6031 watch which probably hasn't been used for at least 10 years (was belong to her late father) and after changing battery and not getting any reaction I've taken it to a repair and the gentleman basically put a drop of some liquid on it which made it works for about 5 minutes and then stopped working again. My question is could it be that the oil dried after many years of not working or how to go about trying fixing it? I have ordered a new equivalent movement which I am waiting for, but for my practice I just wanted to try to fix it even though it doesn't pay. Thank you for your assistance.

Citizen_6031-G08644_YO.jpg

Link to comment
Share on other sites
Chopin Super WRT Addict

Chopin

Posted
Posted

Quartz movements can and certainly should be serviced just like mechanical ones. But we're usually talking about quartz movements that were made to be serviceable (so not the cheap chinese plastic ones...).

I would say that this one can be serviceable and you could certainly give it a try. I find them a lot more simple than most mechanicals.

Only wish they were larger in size as it's a fiddly job.

This type of movement could also require short circuiting it to start.

  • Like 1
Link to comment
Share on other sites
PJA WRT Addict

PJA

Posted
  • Author
Posted
53 minutes ago, Chopin said:

Quartz movements can and certainly should be serviced just like mechanical ones.

I would say that this one can be serviceable and you could certainly give it a try.

 

Thank you.

Link to comment
Share on other sites
PJA WRT Addict

PJA

Posted
  • Author
Posted
2 hours ago, Latvas said:

Have you tried line release cleaning

 

No, I haven't. I am just starting now with this hobby and not even know where to start, but can you give me a few words about how to go about it? I was trying to search it and can't find anything about it. Thank you.

  • Like 1
Link to comment
Share on other sites
Neileg WRT Addict

Neileg

Posted
Posted

Most quartz watch testers have this function. It creates a spinning magnetic field that drives the watch mechanism at speed. This can be enough to break loose old crusty oil or slight corrosion and get the watch running.
It's a bit quick and dirty as watch repairs go but can be very effective especially if the watch has been sitting unused.
Neil


Sent from my iPhone using Tapatalk

  • Like 2
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
7 hours ago, Latvas said:

go to ebay, and search for , quartz line release.


Sent from my iPad using Tapatalk

Line release is a novel way to release a gummed up quartz movement. However it does not offer a long term fix. I would relace the movement.

  • Like 1
Link to comment
Share on other sites
PJA WRT Addict

PJA

Posted
  • Author
Posted
12 hours ago, Latvas said:

I was searching for line release tools and correct me if I'm wrong, as I see it only the Horotec Turbo spins the dials while the others do only battery check like with multimeter without opening the back case?

Link to comment
Share on other sites
  • 6 months later...
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Omega cal. 565 - low amplitude

      By RichardHarris123 · Posted

      @JohnR725 has pointed out many times that the Swiss don't care about amplitude, the timekeeping is the most important.  Give yourself a  pat on the back, great beat error and timekeeping, nothing to be disappointed about. 
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      I'm bothered but I agree he's a busy man and I don't want to bother him.  In the meantime, we really do need to have other ways of contacting each other  
    • RichardHarris123
      Second hand watch market.

      By RichardHarris123 · Posted

      This is as complicated as epilame, too many unknowns. The life expectancy in the UK is circa 80, so most people from 1944 or earlier are dead.  Assume they had children at circa 20, they died in 2004. Their children started selling 1944 watches in 2004, so pre-1944 watches must be getting more rare.   It doesn't work though because as you stated some were sold as tat, but since watch prices have increased people have decided to sell when they may not of done in the past. 
    • Michael20
      Questions about my Bravingtons Renown Mantel Clock

      By Michael20 · Posted

      I was wondering whether anyone could assist with some questions I have about my latest acquisition, which is a two train ‘Bravingtons Renown’ mantel clock - Pics attached I have done some reading about Bravingtons and believe they sourced movements from various suppliers, so I wondered whether anyone recognises this one. I have stripped and cleaned the movement and the clock is now running well, but there are a couple of dodgy brass springs that I would like to replace. I haven’t found anything suitable searching the internet so I wondered does anyone know of a supplier that might help. Last question is about the veneer on the case, it is generally in reasonable condition but there are a couple of patches on the top where the veneer has lifted. So far, I have tried to reactivate the existing adhesive by heating from below and above with a hair drier, then clamping for a day or two. It has improved slightly but the bulge is still visible. I’d be grateful for any advice if anyone has dealt with this sort of repair before.
    • watchweasol
      Insert the movement inside the case

      By watchweasol · Posted

      Hi some pictures o& the movement and case would be appreciated so we can ascertain what the problem is you are having in fitting the movement.   Thank you.
×
×
  • Create New...