Jump to content

kif flector replacement

thessler
 Share

Recommended Posts

thessler Member

thessler

Posted
Posted

Hi

I'm fooling with an old bulova and broke off a leg on the kif flector spring.

Anyone have a source for these ? Apparently they are made in three different sizes,  I have not determined which size I need but that's almost irrelevant due to not finding any for sale.

Maybe they are no longer available any thoughts ?

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
 

Hi

I'm fooling with an old bulova and broke off a leg on the kif flector spring.

Anyone have a source for these ? Apparently they are made in three different sizes,  I have not determined which size I need but that's almost irrelevant due to not finding any for sale.

Maybe they are no longer available any thoughts ?

You should take a look at the reference 2 . But which size i don't remember? 2-2 or 2-3 or 2-4. 

kifchartnew1.thumb.jpg.9e0fe38f41f8b33bedf033e61ba984c9.jpg

 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted (edited)
 

Rogart

Yes reference 2 is what I have. The question would be where can I buy them.

I don't care about the size I'll just buy all three then figure it out.

Thanks, Tom

You can buy them at cousinsuk. But they cost £10 for each package? 5 in each.  So they aren't cheap? Only think they have the 2-2 and 2-3 sizes . 

Maybe ofrei.com  is better for you? 

 

Here you have the sizes. Think you can order from boley.de also. 

https://www.boley.de/en/shop/5386.shock-protection-springs?acceptCookie=1

Edited by rogart63
Link to comment
Share on other sites
  • 4 years later...
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted

Greetings, gents. I hope everyone's well and starting the new year on a high note.

I'm working on a small vintage Bulova (7 BUC) that utilizes the Kif Flector style shock protection. I haven't worked with them before and am wondering if i need to locate a special tool or whether I can fudge it with pegwood, screwdriver, old oiler, or? I see lots of Kif Trior tools but none for the Flector configuration.

Any help on working on those before I mess them up and/or lose them? Many thanks. Cheers.

MrR

Link to comment
Share on other sites
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted (edited)

I only see Kif tools for the Trior type springs. Nothing for the Flector configuration. Does anyone make such a tool that can be purchased today? I'm trying to avoid losing the springs. It's a very small movement at 7.75 lignes (AS version).

If I could see an image of the end of the tool it would help me if I need to make one. Thanks ahead of time. Cheers.

Edited by MrRoundel
Add image comment
Link to comment
Share on other sites
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted
On 2/1/2022 at 2:40 PM, Delgetti said:

Did this only on one watch so far and didnt use a special tool. Turned it anti-clockwise with a very fine tweezer end about 45 deg, then just fold it up like a inca. Didnt take it out.

Thanks, Delgetti. Before I read your post, a friend offered to lend me the special Kif tools that he had in his "kit". I made a minor error by not looking at the setup under higher magnification and before reading your post. The special tool really didn't seem to do a lot of good aside from denting the spring up a bit. On the second one I checked under my microscope and saw that these springs, as different as they look, aren't that difficult to deal with. Once I saw that the hinge side has its movement limited to the inside of the larger cutout in the rim of the setting, and the other side was the clip-in side, I used the tool to basically make sure that the spring didn't ping. I then used an old oiler to spin the spring around to the recess and remove. Yes, it's very much like the Inca in how it hinges, etc. Many thanks. Cheers.

 

Link to comment
Share on other sites
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchfellow
      Setting power reserve on LeCoultre Futurematic

      By watchfellow · Posted

      Thanks everyone for the replies. It seems setting the hand is a bit of a guessing game, and I thought there would be a very specific way to do it. Since the reserve indicator hand moves clockwise as the spring is wound, I tried setting it right at the start of the black side. But setting it there doesn't really make sense, because by the time the spring is halfway wound, the hand is only at the end of the red side... In my head halfway wound shouldn't mean the hand is still "in the red."
    • Chief
      Intro

      By Chief · Posted

      Lovely part of the country! I spend most of my days driving along the A64 for work in and around York. I'll be sure to drop plenty of questions soon! I've actually got a couple of watches on the way that I'm pretty sure I'll need some help with! They look pretty beat up from the pics but I love a challenge and an excuse to buy more tools 🤣
    • oldhippy
      Help - London Elliott Mantle Clock Night Silence

      By oldhippy · Posted

      I have two of these in my home. You need to remove the movement from the case, take off the hands and remove the dial and take a few good photos of the front plate so I can see what the problem is. The round nut unscrews and the hands pull off pull them off from the center and not the tips as you could break them. 
    • Neverenoughwatches
      What is this tool !

      By Neverenoughwatches · Posted

      I asked the question of one of the sellers. Its for removing the pins and making the holes in motorbike drive belts. God knows why they were both in two seperate joblots of watchmaking tool, thats bizarre. I haven't posted your setting lever steel yet mike, been busy with my mum past few days and had a locked myself in at home lazy watch repair day today 🙂 but I'm out tomorrow so i will get it off to you then. 
    • MapleWood
      Help - London Elliott Mantle Clock Night Silence

      By MapleWood · Posted

      Hi everyone, I tried looking for answers on this online but came up with nothing, so I'm hoping some of you knowledgeable people might be able to help. I have an Elliot clock that has been in my family for at least 4 generations. I recently enherited it, and I'm trying to get it to run properly again, as it's been neglected a bit.  Here,s the problem. These clocks have a silencer mechanism, which is supposed to stop it from chiming between 11PM and 7AM but for some reason mine is silent between 1AM and 9AM. I have tried figuring out how to adjust it but have not managed. Does anyone have any idea on how to correct this? Please find attached some pictures of the clock. Thank you!
×
×
  • Create New...