Jump to content

Wakmann I just bought


CKelly

Recommended Posts

Hi all,

   It's been a while since I posted anything, I retired a year ago and have been busy working on our house and keeping busy with watches but haven't really had anything worth sharing until this week. Anyway I put an ad in the local paper looking to drum up a little business or maybe even buy some interesting watches. Yesterday I bought a box of assorted watches. Got two 18s Elgin pocket watches, one accutron, a handful of other watches and this Wakmann. As soon as I saw it I knew I was going to have it. I offered the guy who owned them $300 for the lot and he said $350 and I said Ok. The Wakmann doesn't run yet because the hairspring looks like a birds nest. I know Mark has a video about how to straighten out hairsprings and I have done a few but this is beyond me so I have ordered a balance complete from Jules Borel at what I thought was a very reasonable price.

   Hope you enjoy the pictures. I did take a close up of the movement ring because it looks as if someone used tar as a seal. I have put the movement back in the case just to show what the watch should look like when it's finished. Also see the tangled hairspring. I'm not sure what happened but the regulator arm was pushed into the center wheel so I'm guessing the wheel caught it.

DSCN3398.JPG

DSCN3400.JPG

DSCN3401.JPG

DSCN3403.JPG

  • Like 3
Link to comment
Share on other sites

I second @oldhippy's assessment- for some reason rubber gaskets turn to pitch if they aren't changed out eventually.

Interesting chronograph bridge on this movement- it looks like it has been milled down and does't have the normal Wakmann inscription on it.  The dial, bezel, hands, and case are in fantastic shape though.  Quite a nice haul for the price. :thumbsu:

Link to comment
Share on other sites

Hi,

   Just wanted to say that I did some research on this watch and found it could have been assembled by Chas Gigandet which is how the movement is marked. Did see some others similarly marked so I assume it is correct. By the way the movement is a valjoux 236 and is now running very well. When I checked after installing the balance my timeograph read +4 seconds.

   I know people sometimes use that sealant to repair a failed gasket but it gets everywhere and takes a while to clean out. I found it up under the dial and about everywhere it could get. The replacement gasket was maybe a $1.00 or less. Had to buy 3. Anyway balance came in this past Saturday and watch is now running well. Just looking for a nice 22mm band now.

Link to comment
Share on other sites

Hi again,

  When I read oldhippys' post I just couldn't believe how the one gasket could have failed and made such a mess. When I cleaned out the watch case I saw the goop was not where the gasket should have even been. There was pitch up under the case back, on the movement ring and it had oozed up under the dial. I guess the gasket could have basically melted. Didn't think of that.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • its used to lengthen or shorten the suspension spring from the front f the clock dial, this in turn will give regulation to the clock. Try inserting a pocket watch key or even better the double ended key for the clock into the small aperture on the dial at the top and turning it, you will see the suspension block either raise or lower. If it raises the clock will run faster if it lowers the clock will run slower
    • Grateful for info regarding the nature & function of the horizontal cog and the unit it's on top of in the picture. It meshes with a vertical cog (enclosed in the unit) on the arbour which is supported at its other end by the back plate of the dial unit to which it is not quite perpendicular...
    • does anyone knows what type of battery this digital Watch takes?  
    • Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
    • Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
×
×
  • Create New...