Jump to content

Watch Makers bench

Durston

By Durston
in Tools & Equipment

 Share

Recommended Posts

Durston New Member

Durston

Posted
Posted

This is the first time i have posted and would really appreciate all your comments. (well I posted yesterday but cannot see my posts)

We have been asked to make some watch makers benches. On the front top of the bench there is often a part that sticks out. (sorry, I am sure there is a word for this), My question is. is there an ideal width and depth of this part. I dont mean the bench peg on a jewellers bench. I mean the part that sticks out and is the same part as the bench top.

thank you. Matthew Durston. 

Link to comment
Share on other sites
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      What is this tool !

      By mikepilk · Posted

      I used Google Lens on the pic and it suggested "motorcyle belt punch". And googling pics of that does show very similar tools. The end on mine is sharp, and does look suitable for punching holes in leather. I've no idea what belts on motorcyles would need piercing? The hole is about 1/4", so I cannot see a use in watchmaking. So, why have we both found one in a collection of watchmaking tools? 
    • Neverenoughwatches
      New balance staff not riveting to balance

      By Neverenoughwatches · Posted

      You often see the term used on old watch part boxes.  Staffs for bracelet watches, timing washers for bracelet wstches etc.
    • Chief
      Intro

      By Chief · Posted

      The Boro has changed quite a lot over the last 20 years, and not for the better. I actually moved out of the town 15 years ago to a small village not far away. Thanks for the pdf! Looks a great read. I'll get it printed today and put it on my work bench!
    • Endeavor
      New balance staff not riveting to balance

      By Endeavor · Posted

      Not having all the fancy equipment, this is a way I came up with. I never said it was the best, the most ideal or the safest way. Working on balances is always a delicate task whereby full concentration & common sense should prevail. I was well aware of the "dangers" / short comings involved, hence my "warnings", as quoted above. The balance wheel of the Omega was nice true, flat and one could clearly see how much gap there was left before the grinding wheel would touch the balance wheel. I stopped when the generously applied diamond paste started to touch the rim of the balance wheel, which turned out to be with a seat thickness left of 0.1mm. Tapping the remainder of the staff out went easy and flawless. My idea of penning this article was to show/share a way which, in my case, perfectly succeeded. If deemed to risky, or if the balance wheel is not true or has a wobble, other methods have to be followed.
    • Neverenoughwatches
      Seiko 6601 Tech Sheet?

      By Neverenoughwatches · Posted

      I loved his explanation of a teardown 😅 Ex military Richard Perrett, pretty knowledgeable guy.
×
×
  • Create New...