Jump to content

Tell me what you think of this.

oldhippy

By oldhippy
in All Things Clocks

 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

Nice try clockboy but wrong. If you look close at the movement to the top left you can see the steel stems of the hammers, they chime on a peal of bells above the door, the third barrel is there, you can just see it to the bottom right of the pendulum fixing bracket.

I'm giving too much away.:biggrin:

  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

EMMMM TRICKY.  I notice in one of the pics there is a screw laying in the bottom of the case. However I think I can just see the third barrel arbour. This is a movement I have never seen before and I still don,t know how the strike works. If the steel rods strike a peal of bells above the door why has it got a conventional chiming ring?

Also how does the pendulum swing or does it miss the bracket just to the left of the middle barrel arbour. 

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

I'm lucky I have repaired many of these movements so I know them inside out. The strike is rack striking more or less what you get in an Smiths strike only much bigger and better made. The gong is for the strike only, it chimes on the peal of bells but strikes on the gong. The pendulum swings fine, its a little miss leading but there is plenty of room. 

  • Like 1
Link to comment
Share on other sites
frenchie Distinguished Member

frenchie

Posted
Posted

Easy!!!! it's five thousand pounds... :P 

And the case is cracked in the front, and the key hole to open the front is all worn out (not sure why you would need to open it anyways, there is a hinge in the glass so I presume you can just open the glass to wind it.

Given all that, and the hint already given, I'm going to say the clock style and movement are from different countries, like a French box with a German movement, or something to that effect (maybe dial style vs movement)...

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

Correct clockboy:Bravo: The movement indeed is English so is the case, the case has been made for the French market. It strikes on the gong which I've already mentioned, depending on the case and the wood it is made out of will effect the strike sound, many are very dull.  :D

I'll disregard what you said about the fusee barrels. :startle:

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted
1 hour ago, frenchie said:

Just to make sure I understand, is there anything wrong with this clock or does it just have a design quirk (make in England for the French market)?

The only thing wrong is the description of the clock by the seller.

Beautiful massive Triple fusee French ebonised Bracket clock with Bracket

The correct wording should have been  Triple fusee English Bracket clock in a ebony type case made for the French market. 

The case isn't ebony it is painted black to look like ebony, if you look at it closely you can see in places the lighter type wood. The answer I wanted was just about the movement, if I wanted the right one for the case this little game might have lasted a lot longer. I'll see if I can find a harder one next time. 

  • Like 1
Link to comment
Share on other sites
Folkvisor Super WRT Addict

Folkvisor

Posted
Posted

This is really interesting but way beyond me.

I just test myself by putting everything on the bench, mixing it up a little, and then making myself name all the little rascals and telling myself what they are all for. I figure if I know what they are I should be able to put it all back together. LOL

Dave

  • Like 1
Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      I read that same article last night  H.  I think epilame is too much headache for me, sources aren't always accurate, some conflicting. Such is the GRAVITY of this situation, Is it ok if i just STICK  to a thixotropic oil 🤣
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Not sure I follow along. As I stated in one of my previous posts, the epilame will remain intact between rubbing parts as long as the surface is lubricated by oil or grease. Maybe it's just a coincidence, but note how the epilame-treated surface is illustrated in @Waggy's post. It looks like the oil is exposed to a binder (epilame!) so that it can't move sideways.
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      The epilame under the oil will also be removed  Unless the oil makes a barrier between the epilame and the escape teeth 😅 I think i need two strong coffees now 🤣
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      If we use the rub-off epilame method of pallet stones (run dry for a few minutes before applying the epilame) where will the oil go/be transported when it is pushed away from the impulse surface by the escape wheel teeth? Onto the epilame-treated sections of the pallet! Once the oil has been applied/transported to the epilame-treated sections of the pallet where will it then go? Nowhere as the oil will remain on the epilame. So, perhaps the run-dry method defeats its intended purpose leaving the pallet impulse surfaces dry!? If, on the other hand, we do not remove the epilame from the pallet stones where the escape wheel teeth come in contact with them I'd expect more oil to remain where we want it and need it. Yes, I agree, that is the question, and my gut feeling tells me that is exactly the case. Epilame was created to have an adhesive trait and the oleophobic property is just a side effect.  
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Might that be the viscous nature of oil resisting gravity H  ,  we have been comparing water and hydrophobic surfaces which are similar in principle but water is much less viscous than oil. I guess what we trying to discover is if epilame also has an adhesive trait as well as being oleophobic. Plus the oil dropet has very little mass for gravity to work on, like watching tiny water beads that can grip onto vertical glass until they are connected together to increase their mass then run down. Gravity isn't the only factor at play when oil is placed on pallet stones. The oil receives a lot of bashing that may push it out of position ? Thinking about it if the oil stays in position for 10 minutes enough time for the escape wheel to scrape off the epilame , then  a walled in lubrication has been achieved,  the epilame is no longer beneath the oil ( possibly mixed into the oil )
×
×
  • Create New...