Jump to content

Time To Retrain

Lawson
 Share

Recommended Posts

Lawson Super WRT Addict

Lawson

Posted
Posted

Hi Guys,

 

Just introducing myself and giving you guys some background on how I came to this forum.

 

I've been in the IT Industry since 1992. Unfortunately, IT positions are rapidly being outsourced to places like India and Malaysia, and this will only increase exponentially in the next few years. 

 

My last position was made redundant after being employed by them for many years.  Even though I received high merits on my monthly reports; there simply was no positions being retained ... it all went overseas to Malaysia.  Because of my skills, I was one of the last people to be made redundant, and having to train foreign workers to replace my friends at work, and eventually myself, not only left a bad taste in my mouth, but was also a huge wake-up call that IT Tech Support is finished in my country.
 
So, I am dedicating myself to learn about watch repair in the hope of being indentured as a apprentice: and retrain into a new career path with a future.
 

I know it is a hard occupation to get into (especially at my age), but I'm a hard worker and determined to succeed.  I want to learn as much as possible to have an edge over other being interviewed for the few positions being offered.  I would appreciate information on study material that you guys recommend ... books and apprentice training course material that I can purchase to further my own personal advancement,  until I get that job offer.

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
Posted

Welcome & good luck in your new career. Its good to change tack, 6 years ago I owned a rapidly declining print business in London, luckily I managed to sell it off and since then have worked as a self employed handyman. I now look forward to getting up on Mondays, work is varied, the order book is full.

Link to comment
Share on other sites
autowind Distinguished Member

autowind

Posted
Posted

Welcome to the forums Lawson,  it's difficult to think of a safe job these days,  undertaker, springs to mind, Dr's, dentists or best of the lot a Banker.

 

The best advice I know is to download and read this book  http://dump.petervanwezel.nl/Practical_Watch_Repairing.pdf  if you read all of it you will have a very good understanding of mechanical watches.  Next step would be to get hold of some scrap movements that you can practice on, there is usually something on Ebay or try friends.  When you can take them apart and put them back together you will have reached a milestone.  Also watch Marks videos on YouTube to see an expert at work. Hope this helps.

Link to comment
Share on other sites
Lawson Super WRT Addict

Lawson

Posted
  • Author
Posted

Thanks for the warm welcome :)

 

Autowind: Thanks for the book advise mate.  I did a bit of a search on this forum last night and spotted that book being recommend (I think the first book Mark ever purchased on watch repair) ... so I ordered an old hardcover copy of fleabay.  I'll be reading that cover to cover to be sure.

 

As for old movements, do you have any recommendation on which is the best cal. and/or brand of movement to start practicing on?  I don't wanna try running before I've even crawl outta the crib :P  Cause from what I've researched so far, there are brands\cal, of movements that are a real bugger to work with (poor design and build, and other far better and much more forgiving to a novice like me.

Link to comment
Share on other sites
southwesttimers Member

southwesttimers

Posted
Posted

Hi Guys,

 

Just introducing myself and giving you guys some background on how I came to this forum.

 

I've been in the IT Industry since 1992. Unfortunately, IT positions are rapidly being outsourced to places like India and Malaysia, and this will only increase exponentially in the next few years. 

 

My last position was made redundant after being employed by them for many years.  Even though I received high merits on my monthly reports; there simply was no positions being retained ... it all went overseas to Malaysia.  Because of my skills, I was one of the last people to be made redundant, and having to train foreign workers to replace my friends at work, and eventually myself, not only left a bad taste in my mouth, but was also a huge wake-up call that IT Tech Support is finished in my country.

 

So, I am dedicating myself to learn about watch repair in the hope of being indentured as a apprentice: and retrain into a new career path with a future.

 

I know it is a hard occupation to get into (especially at my age), but I'm a hard worker and determined to succeed.  I want to learn as much as possible to have an edge over other being interviewed for the few positions being offered.  I would appreciate information on study material that you guys recommend ... books and apprentice training course material that I can purchase to further my own personal advancement,  until I get that job offer.

If you are located in the US there are a few excellent two year watch schools here. Seattle Washington, Norman, Ok, and Lancaster, Pa have schools. You may check in to schools.

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Lawson and welcome. I was part of an in-house team for IT and Telecoms for 25 years but the job went bad when outsourcing started and the big names were tendering and eventually taking over all the mainframe administration. Then on site repairs ceased in favour of complete machine swap out. I decided to retire and have not looked back since. There is a lot of friendly help available here and heaven knows I have needed it. For me it is a hobby and I have restricted myself to two makes of watch but I would guess that you will not have that luxury. Good luck in your endeavours.

Vic

Sent from my iPad using Tapatalk

Link to comment
Share on other sites
Tigertim Member

Tigertim

Posted
Posted

Hi Lawson Ilike you am a beginner at this, to start off i just bought some cheap movemets from ebay just to get used to where everything comes from and goes back to.It takes a long time to get it right but hopefully with practice I and you will conquer it. I have also bought 2 books Repairing old Clocks & Watches by Anthony J Whiten and the other one recommended by the guys on this site is Practical Watch Repairing by Donald de Carle. Good luck

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      What tools does ebay have to offer this week.

      By Neverenoughwatches · Posted

      Just got these good quality diamond files from the bay for Just a fiver, we all love a bargain dont we. Brand names are J.K.Smit  and Triefus, two old diamond tool makers so not cheap crap.
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Its a touch under ive just remeasured it and added a wrist shot. Unbelievably it was £13  plus 3 postage. You dont find watches that nice for that money every day of the week. Maybe removing the epilame in the oil region improves the purpose of it. We may know very soon as i emailed Episurf 4 hours ago to ask that exact question. 🤞they are happy to provide an answer for us. How do you fancy trying a stearic acid vapour treatment experiment  H .  Shall i have a go this afternoon ?
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      That's the size of my grandfather's Ernest Borel watch. Definitely not a lady's watch! 👍
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Thanks H It does have a big crown for the watch , it could be considered a ladies watch these days i guess, it measures 33mm case 36mm with that large crown 18mm lug space. A tad small for a guy of today, but still very wearable. The photo was deceptive so here it is adorning my 7 1/4 " wrist. It need some love to make it run better. The hair coils are touching so running a bit fast at the moment,  not caused by magnetism, and maybe just a clean and a service. The dtal is in fantastic shape.
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      That's one beautiful timepiece! Love the big crown in proportion to the case. Perhaps a ladies' watch, but I don't think so. I have a "modern Ingersoll" watch, but it has nothing to do with the original brand (Miyota 9015 movement). Interesting synonym for synthetic oils! 😆 There is, of course, a limit to how large a volume of oil epilame can bind and hold in place. If the oleophobic effect is too strong then it can become a problem. I'm not sure where I heard or read it, but as I understand it, the active ingredient in a bottle of epilame is extremely small and more than 99% of the contents of the bottle is just a transfer agent. If the active ingredient becomes too concentrated, which it can become over time, or if the product is of poor quality, the oleophobic effect is amplified. This in turn causes the applied oil to look like a gummed-up ball on the surface of the treated part. If that happens, we know that the active ingredient has become too concentrated. What we want is for the oil to bind but not to the point where it is formed into an excessively round ball on the surface. The highlighted text in the patent that you refer to describes well the problem that can arise with too high a concentration of the active ingredient. However, I would be extremely surprised if the entire amount of oil leaves the treated surface as water on wax would. At present, I am convinced that the analogy between wax and water on the one hand and epilame and oil on the other is incorrect. Epilame is described as binding and that is also my absolute experience. Epilame probably has some repelling effect but that is not its main purpose and that is not how epilame is designed and works. The method of abrading the epilame treatment from the section of the pallet stones coming in contact with the escape wheel teeth seems after even more research to be well established, but if it actually works, if so how and why is beyond what I can currently understand. Perhaps it is just to do and trust that it is based on well-established experience. I am, after all, inclined to think so.
×
×
  • Create New...