Jump to content

Hibernation


Recommended Posts

Winter is coming and clening will be a real headache for me. My improvised workshop is outside the house in the boiler room (the furnace here is out of order). There will be really cold and even if just put the loupe on it is getting damp. Parts will dry slower. And if i get them inside water condeses immediatelly on the cold parts. Not to mention those two small and evil creatures playing ball inside which are potential danger to anything  :) I see no chance to install a working corner inside. 

So i have two choices. Hibernation like a bear and no tinkering delicate parts at all until spring or get my parts and tools at weekends to my workplace where i can do fine work undisturbed. 

Link to comment
Share on other sites

13 hours ago, SSTEEL said:

With temperatures as low as -35 here in the winter, I wouldn't like to work outside in that on a watch.

 

Keep warm!

-35?    ?? :) About once a year we have -15 here in Hungary in the coldest night. 

Started persuading my wife to hand me over one of her cabinets but seems hopeless until now...

Link to comment
Share on other sites

Did you tried the red rose in bloom present on the dinner table. And candles...and maybe order some Chinese or Italian food if you can't cook...just make the table pretty and have a bottle of some spirit she likes, handy....Not to confuse with white spirit. That is only for cleaning watches! :)

 

  • Like 1
Link to comment
Share on other sites

i have the opposite problem in florida , its over 100 degrees in my shop with no air conditioning on , in the winter here its only in the 30 degree F range for a few days then in the 50,s most mornings, MY loving wife moved my watch bench into our bedroom,,,,, its warm and she can keep an eye on me i guess,, HA!, anyway its been the best since i dont have a real office any more. its under the window  and GREAT what a wife!!!! kind of HARD doing watches with her laying there NAKED, i think she had something else in mind,,,,,,play first work later,

  • Like 1
Link to comment
Share on other sites

On 2016. 10. 04. at 5:50 PM, rob1crazydude said:

i have the opposite problem in florida , its over 100 degrees in my shop with no air conditioning on , in the winter here its only in the 30 degree F range for a few days then in the 50,s most mornings, MY loving wife moved my watch bench into our bedroom,,,,, its warm and she can keep an eye on me i guess,, HA!, anyway its been the best since i dont have a real office any more. its under the window  and GREAT what a wife!!!! kind of HARD doing watches with her laying there NAKED, i think she had something else in mind,,,,,,play first work later,

Well, did not much watchmaking in the past few days... chose "play" instead :) 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Den / Dennison is a unit measurement of size this is actually a mainspring gauge . I haven't heard of a pivot been measured in Dennison before.  Though the small thickness gauge is  usually supplied with a Jacot tool and is more accurately known as a pivot destroyer.
    • Could it be an abbreviation for Denier? "Denier (/ˈdɛniər/) or den (abbreviated D), a unit of measure for the linear mass density of fibers, is the mass in grams per 9,000 metres of the fiber. The denier is based on a natural reference: a single strand of silk is approximately one denier; a 9,000-metre strand of silk weighs about one gram." The pivot gauge looks interesting, however I wouldn't trust myself to drive a pivot into a wedge incase it jams and gets damaged/snaps trying to get it free. More a comment on my ability and incompetence than the quality or design of the tool 🤣
    • As I've seen multiple posts here about multiple types of cleaning solvents, I've done little more than confuse myself more thoroughly that I was before. To see if I understand things correctly... 1.  Is One dip is a solvent which is a cleaner and also a protective rinse for hairsprings jewels and pallet stones only? Or can it be used on all the parts (like the case and wheels and all the things) It seems like that would be much easier as it's just "one dip" but it is very expensive. 2. Isopropyl alcohol is a great cleaner for manual cleaning or ultrasonic cleaning (only enclosed jar) just not on pallet fork as it may loosen the shellac holding the stones. Does it have to be 99%? 3. When buying a small manual cleaning brushes, does anybody suggest a certain material of the brush itself?   
    • I am new to the new to the watch restoration hobby I have the basic tools. I'm here to learn new things. And utilize my resources (you guys) to expand my knowledge and hopefully save some derelict timepieces from the trash.
    • @Knebo It does make sense.   Most companies are trying to squeeze independents out.     Maybe I wasn't clear and complete. He said, the mid-case has been polished, he says it was probably to remove pitting. - It kind of makes sense to me, as the pitting on the caseback doesn't match the story of the mid-case. - The case is clearly overpolished and the lugs nicely brushed without any marks, so watchmakers are clearly polishing that area the question is how and how much. I am swarmed with work and will be visiting my watchmaker in a few days with the checklist and will post an update then. You have been really helpful. PS. Refer to the pictures in my latest comment for reference to this and the case at 9'o clock is actually sunk. the drawing is a bit hyperbolic.
×
×
  • Create New...