Jump to content

Cars control every year?


Recommended Posts

Do you have that where you live? Here we test our cars every year for rust,brakes;belts and more

I just what to say that a burdon was lifted from my shoulder today.  I can drive a new year again. Not bad for a VW polo from -99 with rust on the blue paint. But apparently its in good mechanic condition.  I am so happy :) Thank you god :biggrin:

How do you test your car or bikes or tanks  wifes .where you live? 

Edited by rogart63
Link to comment
Share on other sites

We used to have free (or was it around US$10?) mandatory emission tests for all cars every year but it has been discontinued for many years now. Each State is different since it falls under the State Laws (not Federal). It used to be a pain with the line of cars and all. If you didn't pass you needed to fix the car and do it one more time (Paid I think), if the second time around it didn't pass (within 90 days or so from the first time) you couldn't drive that car...or something like that.

Now you see more jalopies on the street than before....

  • Like 1
Link to comment
Share on other sites

The basic MOT was introduced in the UK in 1960. However it was very shambolic,it was only required if the vehicle was over 10 years old & it was easy to get a MOT certificate if you knew the right mechanic. Today it is more organised and garages are regulated. In the UK any vehicle pre- 1960 does not now require a MOT cert. 
However when I look back some of the cars I drove before this to be frank could have been death traps. The first car I owned was a Ford Anglia that had a modified engine fitted with twin webber carbs & it was fast. How fast I can not say as it would go off the clock but it was like sh*t of a shovel. When I braked it pulled severely to the left,the petrol gauge did not work & wiper blades were next to useless. Oh and rust holes along the bottom of the doors

There was lots of transport like this on the roads in the1960's. In my opinion it was and is still is an Important requirement by keeping off the roads dangerous & unroadworthy vehicles .  

  • Like 1
Link to comment
Share on other sites

5 hours ago, bobm12 said:

We used to have free (or was it around US$10?) mandatory emission tests for all cars every year but it has been discontinued for many years now. Each State is different since it falls under the State Laws (not Federal). It used to be a pain with the line of cars and all. If you didn't pass you needed to fix the car and do it one more time (Paid I think), if the second time around it didn't pass (within 90 days or so from the first time) you couldn't drive that car...or something like that.

Now you see more jalopies on the street than before....

I recall these emission testing revenue raisers, think the only ones who benefited were the repair shops and state. Having personally witnessed the transformation of automotive evolution from carbs to direct injection fuel delivery and computer command controls, I wonder if those 'jalopies' were less polluting!?!

Of course the unleaded fuel used now probably helps, but I have heard pains from classic car guys who wish they had a tank of leaded gas. I do wish they'd adopt some fed/state safety controls on the absolute junkers that for whatever reason folks feel compelled to drive.

  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...

I live in France for part of the year and vehicles there are tested every two years ( controle technique ) , commercial vehicles have a supplementary emission every year, if your car fails ( contre visite ) you have 3 months to fix it and can still drive it during this time.

Motorcycles are not tested.  :ph34r:

Link to comment
Share on other sites

In Denmark it's every 2 years, costing about €65 (500 DKK) and if they find anything (failed dashboard light or so), you can fix it and come back within a month ....... costing you another €33 (250 DKK) for final approval

In Holland it's every other year...........costing just €25 and no extra if you have to come back.

I have to go this week for my 1996 Mitsubishi.......:startle:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • the arbor square out of place and mainspring thickness/height is what I would double check on this model....
    • Hello and welcome from Leeds.
    • For larger or longer components I have a home made demagnetiser, a old central heating pump with the rotor removed, works well. 
    • I agree - I use a magnetometer app on my iPad. A few years ago, I did invest in the Elma version of this demagnetiser. I have a background in electronics and when I cracked the unit open to explore it, I was very impressed - and reassured - by the careful attention given to the design and the quality of construction and quality of materials.  It will out-live me, and not because of any shock hazard 🙂  I find it very reliable for demagentizing watch movements, but for tools, especially elongated tools like tweezers and screwdrivers, they need to be done in sections, a couple of centimetres at a time.  I always also repeat the demagentising process several times with the object (usually a movement) oriented in several different planes - horizontally at 0 and 90 degrees and vertically.  Checking on the magnetometer app, the movement is effectively degaussed and I’ve not yet had to repeat the process. Just laying the movement horizontally and giving it a single shot sometimes works, but often doesn’t, hence my process above.  Using a compass, I doubt I’d ever know whether the process was effective or not.  The magnetometer is much more sensitive. I still use the Lepsi app, which was available for free, but which I don’t think is  available on the App Store any more.    
    • Hello everyone, I have just started on my  watch repair journey. Many mistakes …pinging springs and lost pallet forks !! My great Uncle was a clock maker with a royal warrant  and his ancestor stated the first hall in London so hopefully some thing rubs off . Looking forward to following the  topics on this forum 
×
×
  • Create New...