Jump to content

Yorkist

yorkist

By yorkist
in Introduce Yourself Here

 Share

Recommended Posts

yorkist New Member

yorkist

Posted
Posted

Hi everybody, I have been browsing this forum for a few months, I suppose just to keep up with the trade, anyway I have found it very interesting I didn't realise there were so many amateurs with such a great span of knowledge.  I left the trade in the 80's when quartz watches were destroying the repair trade, I never considered returning to it as I was settled doing other things, I never lost my love of watches.  I once worked for the firm that imported "Sicura" watches in Clerkenwell as a "Trade" worker repairing guarantee watches at home, this entailed finding out what was wrong and putting it right, it could be a broken balance staff, button and stem or glass anything in fact. I would be given huge parcels of spare parts and told to get on with it.  I used to repair about 200 watches a week for which I received 33p per watch, it was a good living in those days but came to an end during the postal strike in the 70's.  When I stopped trade work I was charging £1.80 for a COH (clean and overhaul) for a normal jewelled lever or pin pallet and £2.50 for an automatic, competition was fierce in those days and you had to keep your prices low.  A few years ago I was offered £25.00 a watch for a COH but it meant setting up a workshop again, so I didn't bother, I even threw away my old cleaning machine when I moved to France (which I regret now).  Now I've bored everyone to death I'll finish and just to say If I can ever help anybody I would only be too pleased.  Thanks to Mark for this site and the brilliant videos which I have enjoyed immensely.

  • Like 2
Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

Hello and welcome Yorkist. I'm  sure your expertise will come in very usrful here. Now Yorkist is that because you like Yorkie chocolate bars you come from York your second names York or you play cricket sorry its one of my pet games trying to work out why people call themselves what they do.

  • Like 1
Link to comment
Share on other sites
yorkist New Member

yorkist

Posted
  • Author
Posted

Thanks for the very warm welcome, the 200 watches a week were not cleans they were just to get the watch going sometimes all you had to do was take the back off pick a screw out of the movement where it had got lodged put it back into the right place and that was it finished.  You have to remember that after the watch was sold and something went wrong the customer would have to send the watch back under guarantee and enclose a 10 shilling or 50p admin fee which of course was to pay for the repair and so the customer unwittingly was paying for the repair. 

Sorry to hear about your eyes Old Hippy, so terrible when you have had a career doing such fine work.

Well Cad101 none of your suppositions are correct, I was born in Sheffield (by accident) was brought up in Manchester, got married in London then lived the rest of my life in Northampton. The Yorkist comes from my love of medieval history especially the "Wars of the Roses" and my fascination with Richard iii.  Again I'm in danger of sending readers to sleep, Thanks again,

Eddie

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Yorkist and welcome,

I enjoyed reading your intro and especially the charges and workload info. Sicura watches crop up here every now and then. All that experience you have amassed is bound to help someone out on the forum. Looking forward to your postings.

Cheers,

Vic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Kkramme
      Coil for old Seiko Credor -- 4002920

      By Kkramme · Posted

      Good question!! Anyone know of a substitute movement??!! 🤔🙏
    • Kkramme
      Rare Seiko 5actus Watch??!! With a lot🤪🤔😲

      By Kkramme · Posted

      Interesting issue that I just noticed: this Seiko 5actus Watch from 1977 has a calibre listing on the dial of 7019-8030R but on the case back it says 7019-8010!! Like a mis-printed coin, is this watch therefore worth a lot of money for its rarity?? 🤪😲🤔🤪
    • Mercurial
      Smit

      By Mercurial · Posted

      I wish that was the case. The Aegler movements used in the early days by Wilsdorf & Davis (for brands like Rolex and Rolco) came in several sizes and without designated calibre numbers that survive.  They become a bit easier to identify during the 1920s. Below is an Aegler-Rebberg, 25.74mm in diameter. It’s from a woman’s Rolex wristwatch. Stamped Rebberg and 500 on the dial plate (but it isn’t a Rebberg 500, it’s the wrong size).  I’d be interested if anyone can identify the movement.  It is based off the Aegler Nr.1, circa 1903, but they based many many calibres of different sizes on it. The closest I have to a positive ID is the  ‘Rolex Nr.50’ circa 1917, but no dial side images or movement sizes are available in the references. There are identical looking movements in many sizes.  The 25.74mm of this movement is a particularly strange size for the era, it equates to 11.41 lignes.      Best Regards, Mark
    • GuyMontag
      FHF70 balance jewels settings

      By GuyMontag · Posted

      It looks like this movement comes with a number of different shock settings. Emmywatch shows that it comes in versions with no shock settings, 'Incabloc', 'shock resist', and 'Supershock'. Perhaps the different settings position the impulse jewel/roller table in a non-ideal position relative to the pallet fork/guard pin. Are you able to check under high magnification if the pallet fork and roller table are able to operate without any interference? Just for fun I took a look and I have one FHF 70 in my collection, a West End Secundus with a non-shock protected FHF70. I had a note with the watch that said, "Movement is stamped 'FHF 70', but the FHF70 looks to have sub-seconds instead of center seconds movement (??)" but that a google search turned up both types for this movement. EDIT: I just took a look in my parts drawer and I have a few of these movements, both in center seconds and sweep seconds, but they all are non-shock protected.  
    • markr
      Sterling fusee info wanted.

      By markr · Posted

      Any info on this watch would help. I know that it's sterling from London but I could not match the o letter date or make out makers mark.  Is the movement maker Camberwell or Lamberwell?   If I give it a twist it will run for about ten seconds.  $45 yard sale find.  I don't think that I want to service a fusee.  What quality is it?
×
×
  • Create New...