Jump to content

ETA Valjoux 7750 questions


Recommended Posts

Evening folks 

decided I wanted a project and it was going to building a watch at cost, picked up everything I needed from various places around the planet.

i picked up a 7750 movement cheaply (so expected some surprises as the movement is a genuine Swiss one).

Assembled the watch, and during the process noticed a couple of irregular things with the operation.

I am hoping if I post a list you may be so kind as to point me at what to look for when I disassemble to sort. 

1. When the stem is removed the watch sometimes stays running

2. When the chronograph is reset the hour counter does not reset when the minute and second counter do.

all good fun, and loving the adventure, plus the watch looks lovely with the sapphire back and diver case.

thanks for your time folks :)

Link to comment
Share on other sites

1: Is this pulling stem out to set the time, or pulling the stem out completely?

If it's the first, then yes the watch should stop if it has the hack (which I believe is standard on all 7750's), however it will keep running if you just pull the stem out completely.

2. That's very weird, could be an issue with the hammer on the dial side that resets the hour function, or it could have a damaged, dirty, or wrongly lubricated hour counter. Do you have a picture of the dial side under the calendar works? 

Link to comment
Share on other sites

8 hours ago, Danh said:

Evening folks 

decided I wanted a project and it was going to building a watch at cost, picked up everything I needed from various places around the planet.

i picked up a 7750 movement cheaply (so expected some surprises as the movement is a genuine Swiss one).

Assembled the watch, and during the process noticed a couple of irregular things with the operation.

I am hoping if I post a list you may be so kind as to point me at what to look for when I disassemble to sort. 

1. When the stem is removed the watch sometimes stays running

2. When the chronograph is reset the hour counter does not reset when the minute and second counter do.

all good fun, and loving the adventure, plus the watch looks lovely with the sapphire back and diver case.

thanks for your time folks :)

You're gonna have to open it up and disassemble.Tha hack  lever should be lubricated with a couple of drops of Moebius D5  on the plate and @MortenS is right: the hack has to be properly seated in its slot and coupled to the sliding pinion so that it does its job when the crown is pulled out.

DSCN0186.JPG

For the other problem...is the hour counter just NOT resetting or is it resetting improperly? If its not resetting check the alignment of the hour counting wheel:

http://www.eta.ch/swisslab/7750/7750.html

 

The hour counter lock, spring, lever and hammer also have to be properly positoned:

http://www.eta.ch/swisslab/7750/7750.html

I know its a bummer to have to take it apart again, but if you want to fix that problem you'll have to.

J

Edited by noirrac1j
Link to comment
Share on other sites

Thanks for all the answers guys, really appreciated, and loads to go on

i have watched Marks Video, but will watch it again a few times (my wife thinks I am strange )

it is a couple of days before I have a chance to do it, but will report back

once again, thank you

Link to comment
Share on other sites

7 hours ago, Danh said:

Thanks for all the answers guys, really appreciated, and loads to go on

i have watched Marks Video, but will watch it again a few times (my wife thinks I am strange )

it is a couple of days before I have a chance to do it, but will report back

once again, thank you

Go slowly and methodically....the valjoux is unforgiving.

JC

Link to comment
Share on other sites

15 hours ago, noirrac1j said:

You're gonna have to open it up and disassemble.Tha hack  lever should be lubricated with a couple of drops of Moebius D5  on the plate and @MortenS is right: the hack has to be properly seated in its slot and coupled to the sliding pinion so that it does its job when the crown is pulled out.

DSCN0186.JPG

For the other problem...is the hour counter just NOT resetting or is it resetting improperly? If its not resetting check the alignment of the hour counting wheel:

http://www.eta.ch/swisslab/7750/7750.html

 

The hour counter lock, spring, lever and hammer also have to be properly positoned:

http://www.eta.ch/swisslab/7750/7750.html

I know its a bummer to have to take it apart again, but if you want to fix that problem you'll have to.

J

Love the animations, and the info, thank you

Link to comment
Share on other sites

I have another question before I take it apart if you would be so kind

is it easy to fit a day wheel to the movement? As far as I can tell I need the date wheel, day jumper, day star driving wheel, and a spring (that I have not managed to source yet)?

is this possible? And did I miss anything ?

thanks

Link to comment
Share on other sites

Before I say "its not hard at all'," do you know how to uncase the movement, remove all of the hands, and remove tge dial? If yes then it'll be easy to change the day and date wheels and all related mechanism.

JC

Sent from my SM-G925T using Tapatalk

Link to comment
Share on other sites

Hi JC, 

Already uncased it, can remove the hands no problem, removing dial is fine (I fitted it when I built it)

i have to strip it anyway to see why the hour counter is not zeroing, so am contemplating adding the day wheel. (And changing the dial of course)

tried googling it and found mixed answers on the subject, so I thought best to ask the experts :)

Link to comment
Share on other sites

I stripped the 7750 today, really enjoyed it, it turned out the Chrono hour counter needed the parts stripping and lubricating as per the specification.

i decided to not fit the day wheel as I wanted to use the red dial I picked up.

great fun project, thanks to all that helped

 

image.jpeg

image.jpeg

Link to comment
Share on other sites

I did not have to strip down that side to solve the current issue.

I am now totally addicted though, so will probably buy a 7750 movement for repair from somewhere so I can do a complete strip and rebuild.

i love the mindfulness of the process

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I used to just remove the stem pop the movement in its case then put the stem back in check everything then back on the timer. 
    • That's the right technique Mal 👍 If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean. Something like this, but tbh its better to just learn to do with your fingers.
    • Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
×
×
  • Create New...