Jump to content

A Longines from 1982 - quartz, egad!


WillFly

Recommended Posts

I don't go for quartz/electric watches as a rule, though I have a couple of solar watches and an Omega f300 in my collection. Going through my father's effects recently (he died 3 weeks ago), I discovered this Longines  - hallmarked for 1892 with a 9ct gold case and mesh bracelet. Quite an elegant watch, and the movement (now obsolete) is a quality L950.2 - quite a reasonable quartz movement in its day. Pulling the crown out to position 1 allows the hour hand and date to be changed; position 2 allows the minute hand to be changed and hacks the second hand.

The date tells me it was probably his 60th birthday present to himself. I can't wear it as the bracelet is too small, so I'm giving it to my son. He can either wear it or sell it, depending on how he feels. For me it has no sentimental value at all, but if my son can make some use of it, good luck to him. I have my own grandfather's British Rail retirement watch - a Smith's 9ct gold De Luxe - which I treasure.

Commiserations on my father's death are unnecessary, by the way, as he was 93 when he died and was a most unpleasant man for much of that time!

 

Longines L950.2 face.JPG

Longines L950.2 movement.JPG

Link to comment
Share on other sites

My boss wears exactly the same watch every day for work. Its old and warn but he loves it. His was a present from his wife for his 40th. And i keep saying thats a lovely watch and he says ill leave it you in my will. But he's  a cantankerous old sod and will probably live longer than me.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think you are right wish one of the two spring should make contact do you know what one?
    • So I was cleaning an especially dirty balance spring with B-dip because several turns were sticking together.  However, after a wash and dry, it seems there are more turns sticking due to the B-Dip.  I can see it clearly in-between the spring turns and it is not evaporating.  I even stretched the spring upwards a bit to let them air out and they continue to stick.  This is after two washes.  You can still see the liquid between the springs. Not sure if anyone has seen this, but I don't know if this is an indicator of my dip going bad or being contaminated.  I would rise with IPA, but the stud and collet aren't pinned--they are either glued or shellacked so I won't risk it.  If I keep seeing this, I'll probably switch back to a heptane or naphtha for this type of cleaning, but I wanted to see if anyone else has seen this with B-Dip. 
    • Hello and welcome from Leeds, England. 
    • I only watched the start, but he's out on magnification by a factor of 10. It's 7X to 45X, not 450X
    • It's one of those tools like screwdrivers and tweezers, where it's worth spending more for the quality. And it gets used all the time. At about £20, the 4040 is not expensive for Bergeon.  When putting a watch in dial down, you have to be careful not to catch a sweep second hand, but once secured, life is easy - two hands available to work on the stem.
×
×
  • Create New...