Jump to content

Listen to that little voice in your head


Recommended Posts

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

  • Like 5
  • Haha 2
Link to comment
Share on other sites

8 hours ago, ManSkirtBrew said:

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

Haha now you know. Feed that blood sugar up to where its stable. 

Link to comment
Share on other sites

19 minutes ago, oldhippy said:

When I hear that voice in my head and I start talking back. I'll know it's off to the funny farm for me. 🤣

When we're younger its the voice of reason, when we're older and it tells us to do unreasonable things then it's the voice of insanity. Not to worry you wont be alone we're all heading in that direction sooner or later 🙂

1 minute ago, RichardHarris123 said:

Have a few beers, full of sugar and we all know being drunk is perfect for watch repair.  

When we're drunk we think it's a perfect state for doing lots of things 😅.  Sooooo glad i dont drink anymore, can you imagine?  😆

  • Haha 2
Link to comment
Share on other sites

Posted (edited)
1 hour ago, rossjackson01 said:

Never touched alcohol in my life. I don't need alcohol to be stupid. Just comes naturally.

I've never touched my life without alcohol 🤣.  I'm your complete opposite Ross

Edited by mikepilk
  • Like 2
  • Haha 4
Link to comment
Share on other sites

6 hours ago, mikepilk said:

I usually don't need to reapply epilame.

I probably don't either, but it's peace of mind for me after re-cleaning the jewel. Maybe I'm too **BLEEP** retentive for my own good.

Link to comment
Share on other sites

I'm a teetotaler. Many members of my family are alcohol intolerant. 

When I was a baby, my parents gave me a teaspoon of Woodwards Gripe Water and I turned cherry red and passed out for a day. They rushed me to the doctor the next morning and he had a good laugh. Those were the days when baby formulations contained alcohol.

I remember watching a darts competition where one of the contestants said that a certain level of alcohol is needed to calm the nerves and stop the shakes. I wonder if that works in watchmaking. 🤔

  • Haha 1
Link to comment
Share on other sites

Posted (edited)

A method I use now is assemble the jewels & Chaton then hold it steady steady with tweezers and lubricate with an auto oiler. It takes some practice but the controlled amount of oil is absolutely in the middle. 
 

ps I think I our Mark uses this method 

Edited by clockboy
Link to comment
Share on other sites

Posted (edited)
1 hour ago, clockboy said:

A method I use now is assemble the jewels & Chaton then hold it steady steady with tweezers and lubricate with an auto oiler. It takes some practice but the controlled amount of oil is absolutely in the middle. 
 

ps I think I our Mark uses this method 

Would like to do it this way, however the cost of an auto oiler is prohibitive. Ah well. 

 

Although. just seen these and am thinking about them. What do members think? 

https://www.ebay.co.uk/itm/193591257965?itmmeta=01HYV7YKH2YSFS1X47KGGR9EYV&hash=item2d12f02b6d:g:zLkAAOSw-jBhn1yx&itmprp=enc%3AAQAJAAAA4K8V03d7GCxVXExFkKQf8lxskAAWaKftxSv2442lZOV71McerFS9kBH1OEgn0wB3IPBtyUvP29aP67foi0y%2F4LlI0ZzaZGzRrLsn7mAUNCSMsP2%2BNKZ3Rv1U%2FcsB7RQ3MFRAGFOflqxsJHu0GO8IPqbdFaUB3AV5UjVJ3zN1vhhhAmGlwjYVgq5YCPJAZBqhXAJxnxbLlF%2Fswdvog08XJ1KVBBfd2kmSi9PrtslZjkNMkDzyHRAZjLIST6r2mU7oMuNgTyORXznN7f3iykMdd6xBDLEVW4DlGxkSxkihib44|tkp%3ABFBMzrj65_Zj

Edited by rossjackson01
More information
Link to comment
Share on other sites

On 5/26/2024 at 4:12 AM, ManSkirtBrew said:

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

oh boy, I know how that feels!

on the up-side: at least you got that soothing feeling of finally finding the jewel. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Great piece of kit. Is that a tin of oats? I see it looks like to be a macgyvered power drill. Nice. How did you control the speed? Don't tell me you hold it while it does all the cleaning cycles? Where did you get that nice mount and stand for the drill? Why was there a need for a step down transformer for 230V to 143V?? Does the hair dryer not get hot enough to melt the shellac on the pallet fork and such? That's a repurposed oven timer right? What's the white appliance? Cool. 
    • I had the same issue. C to CS adapter: https://www.amazon.com/gp/product/B01FY70S4G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Not sure where you're located, but your amazon link looks like a US market one, so that should work for you. I even got a 4-pack; one for each power, plus one for @gpraceman (did I give that to you already?) to complete his set. I'm not sure having one for each power is worth it, but they were cheap. 
    • Thanks OH. The name is William Burroughs, Chippenham. The brass plate is 12" across but the dial itself is 11.24" diameter. The case appears to be Oak (the hood remains at my friend's house). I can see many suspension springs on line but don't know what this one's specifications would be. Re Rochard's comnent, I could see how a chain loop could be used manually to turn a toothed day wheel but this one is toothed on the inside circumference!
    • 1914 then lol This is a very difficult old watch for a beginner to tackle,  the case screws suggest it comes out from the front so the broken one is not going to prevent the movement from coming out now that it is broken.  The screw that you point to is a dial foot screw that only needs half a turn to release the dial foot from the screw's sharp shoulder that cuts into the foot. But honestly i would bag it up for another time until you are ready. If you lose anything from this while taking it apart and you almost certainly will, you may well struggle to find a replacement, seriously this is too sentimental to mess with just yet. Beginners perception of what is involved can be way way off what is reality.
    • 👍Thats what i like to hear fella  , someone with some blood in their veins 😄.      " TAH- DAHAAAA "⚡️⚡️☄️  🔥  There's never a decent imoji when you want one  🤷‍♂️ If you questions , which I'm sure you will have. 1. Yes i could well be one card short of a full pack.  2.  Yes I'm serious this IS my actual set up 3. Dont forget what i said about laughing at it.  Fire away I'm  all ears,   🤔 eyes...........whatever 🤷‍♂️
×
×
  • Create New...