Jump to content

Watch Brands Flying Under the Radar

Waggy
 Share

Recommended Posts

Waggy Distinguished Member

Waggy

Posted
Posted

I know that watches are highly personal, but even with this in mind I am looking for what you think are the overlooked brands out there that deserve more attention and/or are fun to repair and/or collect. For example, I recently did a Zodiac watch and really enjoyed the quality and style and began to wonder how come this brand had slipped under my radar and I hadn't been aware of them previously? We all know about brands like Rolex etc. and they are great watches, but I am interested in brands that may not be so obvious that have their own charm that I haven't come across yet. For example, I have an Enicar on the way and I have never worked on one or even had one in my hands before, but based upon what I see online (YT Horology Biology) maybe there is something to his passion about this brand and they are another undiscovered gem that I am currently unaware of?? 

So here is your chance to shine the spotlight on your under-the-radar brand(s) or brand(s) that may be well-known but are under-rated and why you think they are deserving of more (or additional) attention from your fellow WRT users.

Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
Posted

In my fairly limited experience (about 100 watches),there's a couple of makes that impressed me by their quality, over what I was expecting (Omega, Universal, Cyma etc I was expecting quality) :

 Longines (up to 70s) - not really a surprise. But I think I'd take a manual wind Longines over an Omega !

Revue. I have a couple of Vertex Revue, the movements are nothing fancy, but everything just fits so nicely. One is a Calibre 59 (as used in the Revue version of the Dirty Dozen watches). Basic, but lovely movement.

From another thread,  @nickelsilver  and @Nucejoe have recommended Pesuex as a quality brand.

image.png.c14a4423aad22845ed048a1f4638499a.png

  • Like 1
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

Kings Seiko 5625 & 5626 are chronometer

(high grade)  movements, some are officially certified chronometer watches, I have seen used ones for $500  & up   on ebay. 

I don't know if a non chrono balance complete is ever made to fit them yet make sure you get one with good balance complete, or have the option to return.

That I think is the least expensive chronometer watch money can buy for the quality  

 

Link to comment
Share on other sites
Razz WRT Addict

Razz

Posted
Posted

I think the Croton, Croton Nivada Grenchen, and or NIvada Grenchen "family" of vintage watches are somewhat under the radar. Many aquamatic models have ETAs and have great dials and cases.

Link to comment
Share on other sites
Razz WRT Addict

Razz

Posted
Posted
On 6/24/2023 at 9:49 PM, Razz said:

I think the Croton, Croton Nivada Grenchen, and or NIvada Grenchen "family" of vintage watches are somewhat under the radar. Many aquamatic models have ETAs and have great dials and cases.

Here is an example I probably posted somewhere else. SS case with drilled lugs, lovely dial, and an ETA automatic. I really like the way the crown fits into the case. 33.4mm wide, 41mm lug to lug. Works well on my small wrist.DSCN5299.thumb.JPG.6c97917b252d71b0f840655fc8b8808c.JPGDSCN53002.thumb.JPG.0fc803b58753a9598b1e5296e46ccfea.JPGDSCN53012.thumb.JPG.902194282b6d59e8b4f528dd51c459a5.JPGDSCN53022.thumb.JPG.3c8eab366de061a5ea46dce2bb30974a.JPG20230626_2139543.thumb.jpg.c0f79d4012efe9993dcc90eb0bb4df09.jpg20230626_2139542.jpg.5c540e3cf9e3a2301e0697e07f216ac1.jpg

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rehajm
      Vertex Dirty Dozen crystal

      By rehajm · Posted

      A couple of pictures of the front… Sorry, I’m months away from this one, but…there is an edge to the bezel but I see no obvious signs of previous bezel removal and it is quite thick so it would be difficult to grab an edge on the crystal with a crystal lift. It does look like in/out thru the back…good luck…
    • rehajm
      Which Watch Have You Got Coming In The Mail ? Show Us !!!

      By rehajm · Posted

      That sounds lovely…
    • RichardHarris123
      First Project Already A Bit "Sideways"

      By RichardHarris123 · Posted

      Screws are available as below. 
    • ColinC
      First Project Already A Bit "Sideways"

      By ColinC · Posted

      Personally I would salvage the missing screws from some donor movement.  I also bought a random selection of screws "Assortment of Stainless Steel Watch Screws" for next to nothing.  As for using an Alum solution - I had great success with that removing a rusted stem from a stainless steel crown.  The best piece of advice I read on doing that was to keep the solution warm so that the reaction didn't take weeks!  I did it in a couple of hours with the solution in jam jar and the jam jar in a saucepan full of water which I left on an induction hob maintaining about 60C in the Alum solution.
    • DDean
      First Project Already A Bit "Sideways"

      By DDean · Posted

      I decided that it was time to tackle the piece that I'd set aside as my first project. The subject in question is a Gruen Veri-Thin pocket watch.  It winds and "runs".  On the time grapher, it has reasonable amplitude (240 or so depending on the position), but was loosing close to a minute a day.  The stem also has the annoying tendency to just come out when pulled, which makes it super hard to set the thing.  As with many things this one started sideways and just got more so.  I was able to overcome the mangled "tab" on the back case cover (a well placed, very sharp knife enabled me to get in when I couldn't get a purchase on the mangled tab with a case knife.)   I was then sort of shocked to find that one side of the dial was held down with some sort off tape or adhesive material as someone had broken the dial foot screw on that side and left the broken screw in the mail plate. The loose stem does in fact seem to have been a poorly tightened setting lever screw, but I'm afraid there may still be gremlins in the keyless works.  While I was able to get the stem to stay in by putting everything in the right place and tightening the setting lever screw (before I took it all apart for cleaning and inspection), it just didn't seem to all sit right. The final gremlin showed up when I was taking off the lower cap stones for the balance and escape wheel (yes the Gruen 380 seems to have a cape jewel on the escape wheel).  The balance stone came off fine (but that in fact is the smallest screw I've ever seen.  When I turned the movement around to get the one off the escape wheel setting, I found that the screw head had been mostly sheared off.  After some reading and looking at what I had, I decided to try and tease what was left of the screw out of the hole by nudging what was left with the corner of my smallest screwdriver.  After 20 minutes or so, I was able to get the remains of that screw out. The picture I'm including of the disassembled movement was taken before I got the second cap stone off, so in the picture, it's still attached to the main plate (for those looking carefully, you'll only see the one cap setting in the pic.) Now I'm left with: A broken dial screw inside the main plate that needs to come out A broken cap stone retention screw that I have in my parts tray, but that is strictly useless and needs to be replaced. The need to get another dial foot screw I'm contemplating solving the first problem by soaking the main plate in an alum solution.  I think the main plate is brass and shouldn't be affected, but I have not been able to confirm.  This seems like the easiest option as I can't really access both sides of the screw to use the pricey Bergeon tool (which I don't fancy buying unless I have to.) I have located a couple of donor movements and have questions out about whether or not the include the dial foot screw and prompting for pictures of the dial side so  evaluate the cap stone settings.  I've also found that a supplier in this country does have the cap stone settings, but isn't overly clear about whether the screws are included. Are these the types of things that one can scavenge out of assortments or is it best to just grab one of the donors assuming that they look like they have what I need?  
×
×
  • Create New...