Jump to content

Ebay Clocks


oldhippy

Recommended Posts

Over the past few days I've been having a look on ebay at the clocks for sale . I've seen a few eye openers from utter rubbish to overpriced and bodge ups and some very dodgy marriages with cases and movements. Anyone on here bought a clock from ebay?

Link to comment
Share on other sites

  • 7 months later...

I've bought quit a few on eBay. some in great shape and run like a champ but others i bought as a fixer as i like a challenge. 90% of the time a have been able to get the clocks to run by cleaning and adjusting and cleaning up someones obvious inability to do the repair right. the things some people do to try and fix them leaves allot to be desired. bob 

Link to comment
Share on other sites

I only purchase clocks (if at the right price) for spares off the Bay. The clocks I purchased were from a local auction house because I could have close inspection before the bidding process. However I have sold clocks I have re-ferbished on the Bay but with little real profit in most cases so now I don,t bother.

Link to comment
Share on other sites

In the past 6months I bought 3 clocks 2 elliott timepieces both with platform escapements and 8 day movements. 1 French three piece 8 day pendulum strike on a bell, count wheel strike. That was the good side of things.

I originally bought a French clock with the same type of movement as above. The owner said it was in very good condition. When it arrived to me it would not even go for 24 hours, I emailed many times complaining and each time they insisted I hadn't set it up right, this was after I told them I had been a watch and clock maker with about 30 years behind me. To cut a long story short I took ebays advice, sent it back in its original packaging and asked for a full refund. They then told me it arrived to them severely damaged and would not refund my money. I left it in the hands of ebay and I got all my money back including postage. There's some photos of my clocks somewhere on this forum.

Not only is there some dodgy items on ebay there's some dodgy sellers as well.

Link to comment
Share on other sites

In the time I've been using eBay, clock and watches in need of repair it because the just the dregs that are of no use to any one , man nor beast.

I've found it worth paying the extra and get some thing that going.

I like many out there think it's worth a punt, but you know what, it often is'nt, sold as seen no return means its useless.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think we've talked about this before, using a new mainspring to initially overcome the effects of more movement friction than there should be. The aim is to reduce all going friction not to push through the friction with more torque, that in the long run will create more wear.
    • Sensible precautions @rjenkinsgb. I remember as a lad, my mate's dad ran a garage. I can clearly remember watching him change break pads. He used an airline to blow the dust out, (when pads used asbestos), and  we used to practically bathe in "carbon tet". But then he did smoke about 40 cigs a day. Makes me shudder to think about it.
    • OK, a little bit more from today's lecture about the main springs. Generally, the spring in the barrel is limited and can't  unwind fully. With the blue line is shown the reserve/torque relation when spring unwinding is limited by the barrel. The green line represents the same when the spring is free to unwind fully And the red line shows the minimum torque that is needed for the movement to keep running. The yelow graph shows how the torque changes (from the blue) when the spring gets weaker (set) after 100 years of work. The purple line represents thinner and longer spring in the same barrel. As You can see, using thinner and longer spring will increase the power reserve. The 'set' spring will have the same reserve as a new one with the same sizes, only the amplitude will be just a little smaller.  Of course, this is true only when the movement othervice is in good health ( the red line is lo enough)
    • As long as you don't grind the stuff up and blow it around, you should be fine. Use a dust mask if in doubt.   The things I'm very careful of are: Radium lume - even the stuff that is visually completely dead and inert is still highly radioactive; it's the fluorescent part that decays, not the radium. A single speck inhaled or ingested can cause cancer, so store parts in zip bags and wear a dust mask & wipe your work area down after handling anything that uses it. A proper geiger counter is a good investment if you plan on working with vintage watches, so you can check for it & take appropriate precautions.   "One dip" & equivalents - the original type & the generic PERC dry cleaning fluid (Tetrachloroethylene / perchloroethylene) which is what the original one dip was mostly made of. That's toxic, a known carcinogen. Use in very good ventilation only & keep it sealed whenever possible.   The newer B-Dip is presumably a safer replacement.  
    • Only 137% !  sounds like you're not putting enough effort in 😆.  I would think of it like cogs on pushbike.  Fastest speed to the spindle would be largest pulley wheel on the drive and smallest pulley wheel on the driven. If the motor was into a sliding bed you would have 3x4 ? Speeds.
×
×
  • Create New...