Jump to content

I Was Invited So Don't Get Upset That I Am Here Lol

w1n9m4n

By w1n9m4n
in Introduce Yourself Here

 Share

Recommended Posts

w1n9m4n Member

w1n9m4n

Posted
Posted

Just bought my first real watch and may just be interested in getting into servicing and repairing watches for a hobby.

Of course if I end up being good at it I will cut you guys a deal on my services! 

 

Thanks GEO!

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

A warm welcome to the helpful house of horology. There are a lot of great folk on here with a passion for watch repair, both the advice and banter is of a high standard. It's good to see that you have started with a splash of humour, that's the way we like it. :)

I stongly suggest you take some time to view Mark's (the boss) repair videos if you are serious about repairing watches. It's not the easiest thing to do correctly, but if you have aptitude and determination you will manage.

Watch Repair Channel https://m.youtube.com/#/user/jewldood

Link to comment
Share on other sites
  • 2 weeks later...
Vich Distinguished Member

Vich

Posted
Posted

Hello Wingman and welcome to the forum,

 

My only longstanding advice is to take pics before you remove each bit, I am of course referring to watch disassembly not clothing etc.

 

Cheers,

 

Vic

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      Accutron 218 transistors

      By ManSkirtBrew · Posted

      Update: I posted over on NAWCC and it looks like I melted the fine coil wires where they come into the solder lugs. After dropping the heat way down on my iron and being absurdly careful, I have a humming fork!
    • noirrac1j
      Rolex 2235 escape wheel jewel setting replacement

      By noirrac1j · Posted

      Hell0 @nevenbekriev. Thank you for your advice. I have removed the old setting using my staking set--I will keep the KIF spring, since it is still good.  I am awaiting the replacement setting, and will update when I do that. In the mean time, I looked at the escape wheel and it looks ok. What do you think?    
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Aloha All, I recently bought this Seitz tool on eBay, but it is missing some pushers reamers.  I ended up ordering new parts for those that were missing before I received the actual Seitz tool (bad idea).   Upon inspecting the pushers/bits, I noticed 23 of the 56 provided with the set had no numbers. Further inspection revealed a huge difference in the quality of those unnumbered.  Do all Seitz pushers/bits have a number on them?  I'm pretty sure that 33 of the 56 I received are cheap Chinese knockoffs.  The worst part is that I ordered $80 of parts to replace the missing pushers/bits, and now I'm looking to return the tool. I'm not crazy, right? If these are Seitz parts, they should all be numbered, correct? The first two pictures are the Seitz (numbered), and the other pictures are the suspect parts.  Will I even be able to get a refund?  Thanks, Frank     
    • luiazazrambo
      WWW Eterna sucked me in.

      By luiazazrambo · Posted

      It was £10 + min fee, total £16, could not leave it there. Its a Stanton A.D.2. http://stanton-instruments.co.uk/
    • Geotex
      Generic screws for unknown movements

      By Geotex · Posted

      Chief- The picture below shows the three parts from the dial side that are most useful to "fingerprint" a movement in conjunction with the diameter of the movement.  That's why forum participants are always asking for dial side photos in posts asking for identification.  As far as the setting lever screw, it actually sits loose in the main plate. The threads engage the setting lever below, and the elongated stem above the shoulder sticks through a hole in one of the bridge plates so that it's held captive if unscrewed all the way.  So you may be fine as far as that goes. 
×
×
  • Create New...