Jump to content

Regulation of Rolex 2030 mouvement

richiesgr
 Share

Recommended Posts

richiesgr Watch Enthusiast

richiesgr

Posted
Posted

Hi

I've service the movement following Mark video (Thanks to him) but he doesn't show how to regulate the watch.

I've no idea what to do as it doesn't look anything I know. I know some rolex movement need a special tool but this one doesn't seem to need this as I can't see this special screw on the balance.

Is there someone that can explain me what to do ?

Thanks   

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
36 minutes ago, Nucejoe said:

Sorry buddy I keep assuming. 

Most beginners don't know much (as it is right and expected), so we must avoid abbreviations, assumptions, etc.

Another characteristic of some beginners is that they have no fear or problem in attacking expensive, sophisticated pieces requiring special tools. or unreplaceable heirlooms before developing the dexterity needed to be safe. One slip of the driver and the hairspring is busted for good. The safest approach that the OP could do with his watch is to leave it alone for the time being.

Link to comment
Share on other sites
richiesgr Watch Enthusiast

richiesgr

Posted
  • Author
Posted
23 hours ago, jdm said:

Most beginners don't know much (as it is right and expected), so we must avoid abbreviations, assumptions, etc.

Another characteristic of some beginners is that they have no fear or problem in attacking expensive, sophisticated pieces requiring special tools. or unreplaceable heirlooms before developing the dexterity needed to be safe. One slip of the driver and the hairspring is busted for good. The safest approach that the OP could do with his watch is to leave it alone for the time being.

Hi totally agree I made this service but I was very hesitant.

And then I saw the very detailed Mark Lovick video on this exact movement So I was more confident because it's a very precise video (3 parts) with every details and steps.  Regarding the service, the watch run as expected but not in time 

Unfortunately Mark doesn't cover the regulation and I must confess than even with the doc I don't really understand what to do. I even don't know if I need the Microstella in the doc rolex reference the tool as 'Rolex tool ref 2031' is this 2031 is the technical name of the Microstella.    

Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rjenkinsgb
      Accutron 218 transistors

      By rjenkinsgb · Posted

      Many would disagree: https://www.rohm.com/products/faq-search/faqId/234 https://uk.farnell.com/c/semiconductors-discretes/transistors/bipolar-transistors/pre-biased-digital-bipolar-transistors https://uk.rs-online.com/web/p/bipolar-transistors/8232832P?gb=s https://uk.rs-online.com/web/p/bipolar-transistors/0580240?gb=s (RS don't have a specific category, but over 1000 "digital transistor" items).  
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Thanks, ManSkirtBrew.  I started looking for a setup like yours and ran across this.  It was about half the price of the JKA Feintaster (depending on what auction you were in), and it's a Bergeon.  I bought it because I thought the price was fair (eBay - Buy it now), and I'm a sucker for vintage tools. It also has a table, so it should be easy to use for measuring jewels. I wonder if the the contact points can be changed out. Bergeon seems to manufacture new tables and accessories for the contemporary dial version. What do you guys think of it? I'm sorry this post seems to have taken a detour. I'm new here so let me know if I should start a new topic.
    • nevenbekriev
      Winding pinion making

      By nevenbekriev · Posted

      This is a flying cutter, usual one. The cutter itself is shown in the pictures in the first message, it is made of broken tungsten carbide drill bit. I asure that all the angles of the cutter are as they should be. I have video - little older one - that I made when onse making the same kind of winding pinion for a Poljot 2200, which is even smaller than this one. It is not easy to see in the video, but the tool rest moves about 1mm towards the object in Y direction and then returns back untill cutter is rotating. Then the spindle is rotated one tooth ahead and everything repeated untill all teeth are cut.
    • Trav2004
      Help Identifying movement

      By Trav2004 · Posted

      After a bit further research could it possibly be an AS 970?
    • Bonefixer
      FHF70 balance jewels settings

      By Bonefixer · Posted

      Latest project was a non-running ebay purchase with an FHF70 movement. I stripped and cleaned it, reassembled it, and got it running. So far so good, nothing damaged AFAIK.  I was oiling the top jewel on the balance (the one in the cock) which was a slightly unusual shock setting. I removed the spring (3 leaves) which was part of a chaton holding the cap jewel. This left the hole jewel behind which I retrieved with rodico and then lost it. I was taking it off the rodico, very gently as I thought, with tweezers, and then it just disappeared.  Fast forward a week, I got a donor movement, non-running, with the plan to just take the shock jewel that I’d lost. It was the same movement but had standard incabloc settings, and was steel rather than copper/brass.  I changed the cock and balance complete and it ran, not very well. I switched the lower jewel setting, cleaned and oiled both jewels and the replacement balance. Without the pallet fork the balance swings very nicely with a puff of air. With the fork in place, balance out, it flicks side to side nicely with power in the mainspring.  Put them together and it doesn’t run. The impulse jewel sits in the fork and it stops.      Any suggestions how I proceed? In case you didn’t follow that I have 2 FHF70 movements, nothing broken as far as I can tell, but mixing up the balance wheels and jewel settings results in a non runner. 
×
×
  • Create New...