Jump to content

An Olma From The 1940S

WillFly

By WillFly
in Your Watch Collection

 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

Cheapskate that I am, I can't resist picking up a cheapie on eBay now and then and, for not much more than the price of a round of drinks, got this watch from the 1940s - which arrived this morning. The make is "Olma", a Swiss brand registered in 1926 but now obviously owned by an Asian company. Olma was probably in the lower half of the Swiss watchmaking hierarchy, using good, dependable movements. The one in this watch is an AS 1287 - pre-incabloc, with a typical 1940s, quasi-military dial.

 

post-64-0-89820700-1433862172_thumb.jpg

post-64-0-44976100-1433862176_thumb.jpg

  • Like 1
WillFly Distinguished Member

WillFly

Posted
  • Author
Posted

It's always tempting to try to repair some of the obvious signs of age - case, crystal, dial, hands, etc. In this instance, the dial is good and the hands are passable. (The strap came fitted new by the seller). But I'm always cautious in these cases.

 

The case rear is good - quite well chromed and clean - which leaves the bezel and the crystal. The bezel is of a gold-finished base metal and is well "brassed". Not much can be done there other than re-chrome it - which I won't do because it's not worth it. But I might try some very careful and gentle polishing with Autosol. The crystal is high-domed - typical for its period - and has slight scratching across the surface, but is not yellowed (being glass). So I'm actually inclined to leave it - unusual for me because I normally like to replace them.

 

The movement was serviced by the seller - whatever that might mean. It was set by me this morning and is currently correct almost to the second, and the regulator is almost bang in the middle of the -/+ mark. So - no messing with this one.

 

It is what it is - a nice, simple, 75-year old wristwatch that cost me very little.

  • Like 1
  • 3 weeks later...
oldhippy Distinguished Member

oldhippy

Posted
Posted

Good old robust movements AS1287. I haven't a clue on how many of these movements I've repaired. I also had an abundance of spares. Nice clean and clear dial. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VascoF
      Timex M33 - A small repair

      By VascoF · Posted

      HI everyone Some context: I'm "in love" with old Timex. As someone who has always liked watches, I knew Timex (my first watch and another project) but, in fact, the brand had never really caught my attention. By pure chance I bought, in a set of two others watches, a small m24 that was sold as not working (run and stop), which actually started working by setting the date by manually moving the hands (15 days). This coincidence made me interested in its history, its reputation, simplicity/complexity of the movements and also because some were made in Portugal back in 70’s and 80’s. A few days later I found this beautiful 1975 Viscount, m33 (very low price, almost offered) and this is where I need your help.  It is in very good condition and works well (-20s per day is not a problem for me), and although the day of the week changes correctly, the date is "stuck" on the 10th. I live in a small town that only has one watchmaker and when I purchased this watch (and having read about these movements) I thought that since it was something theoretically "simple" (probably not related to the movement), he would easily solve the problem. I couldn't be more wrong. It was as if I had proposed a pact with the devil. He refused and said he wouldn't touch the watch (although he had serviced several of my watches before - Seikos and old Swiss brands). He suggested I wear the watch like this or trash it. As I mentioned in my presentation to the forum, I have some experience in digital watches, but in manual watches I am a complete beginner. I know how to remove hands, crowns and little else. I've been doing my homework, reading the technical manual and watching a few videos on YouTube. I think I can get to the part of removing the dial without any major problems. I know that in the Date Frame there is a wheel that at the top has a tab that activates the Day Wheel and that at the bottom activates the Date Lever My aim is to try not to ruin anything and  get the date working again. The help I needed (I intend to post photos) is that what should I expect? What are the most common problems that cause this system to get stuck (in this case just the date).   PS -  My secondary objective is to buy a strap at a overpriced value from the watchmaker just to rub it in his face that I managed to get the watch working properly. PS2 - In the photos you can see that before midnight the day of the week is already changing but the day of the month has not changed.   Sorry about the english. Best Regards Vasco  
    • mikepilk
      Bent screw

      By mikepilk · Posted

      What is it from and how did it become bent ? It should bend back - I would heat it whilst bending
    • mikepilk
      Photos of your youth

      By mikepilk · Posted

      Ha, same here. I just looked and I've lots of pictures of my cars, be hardly any of me - I have a face better suited for radio. I did find this from about 20+ years ago. I'm the young looking one at the back, under the front nozzle.  
    • Gula67
      Bezel for 1954 Rolex 6581 Oyster Perpetual

      By Gula67 · Posted

      I have a 6564 with me what is take a same tropic 12 crystal,most likely have the same parameters for the bezel. Do you need the measurement for that?
    • LittleWatchShop
      Bezel for 1954 Rolex 6581 Oyster Perpetual

      By LittleWatchShop · Posted

      1954 Rolex Oyster Perpetual 6581
×
×
  • Create New...