Jump to content

Recommended Posts

I've no intent to purchase this, mind.  I was just poking about in Facebook's marketplace and happened upon it.  And I had this feeling that something didn't look right.  Feel free to discuss amongst yourselves.  I'm including an image and a link to the advertisement.  I'm hoping for a teaching moment here, where we all benefit, since in our profession our clients trust us to know the real from the false.

https://www.facebook.com/marketplace/item/1043379103258734/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks

fakerolex.jpg

Link to comment
Share on other sites

10 minutes ago, Kalanag said:

For me it’s a genuin Rolex with a rare enamel dial

 

Thank you much for finding that!  I had been searching for much of the morning over here.  I was not aware that Rolex had ever made dials like that.  Everything else about it seemed all right, but I had not yet seen a dial like that.  The link you posted clarifies that.  Now I know more than I did, and that was what I was hoping for.  

Link to comment
Share on other sites

I actually quite like that, which is odd, since I'm not overly keen on the Datejust. 

I know its iconic and the design has been "homaged" to death, but somehow it doesn't hit the spot for me. That one is not too bad.

Having said that, if you are going to go for an enamel dial, there is so much more you can do with it.

This lot for example. -> https://www.gearpatrol.com/watches/a591357/these-are-the-best-watches-with-enamel-dials/

The AnOrdian and the Holthinrich are more my -fine-bone-china-cup-  of tea.

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

I have never come across a dial like this on a Rolex. I have searched the net and again could not find a match.. For me it’s not a typical clean Rolex design.. 

Therefore I have my doubts but must say the Rolex clones are getting very good indeed.

  • Like 1
Link to comment
Share on other sites

Those are all gorgeous, Andy.  Particularly the A. Lange & Söhne.  Any time a watch brand can make a dial to be, both, as eye-catching as possible, and yet still very easily readable at a mere glance, I will probably fall hard for it every time.  Even that ceramic-dial Rolex up there does well for that.

In the end, if I ever consider getting a Rolex, or any other brand in that range requiring a large sum of money, I would not put forth one penny until I'd gotten out my loupe, taken off the bracelet, and opened the back.  For me anyway, that means I wouldn't be buying it online.
Some I will buy online.  Others, well...if driving out to pick it up is cheaper than the watch, or cheaper than being cheated, it's probably safer to do that.

Edited by KarlvonKoln
Link to comment
Share on other sites

1 hour ago, AndyHull said:

The AnOrdian and the Holthinrich are more my -fine-bone-china-cup-  of tea.

I read anOrdain but see Armitage Shanks. Nice though. Re the Rolex: I'm not on FB, but from that picture I don't see a reason to think it's not genuine.

Link to comment
Share on other sites

On 5/6/2022 at 6:16 PM, Klassiker said:
On 5/6/2022 at 4:15 PM, AndyHull said:

 

I read anOrdain but see Armitage Shanks.

Ooohh... harsh, but fair I guess. It does have a certain similarity to the colours of sanitary ware.

You might like their coloured enamel dials more. This is a company from Glasgow, (where I grew up), and the Glaswegians have a pretty dry sense of humour  so I suspect the "Vitreous Enamel" reference is slightly tongue in cheek.

image.thumb.png.889cd5f68a6e239ec612a58b7d3a73a0.png


https://anordain.com/

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

I do not have money but if I was in the market to purchase another Rolex I would not purchase from eBay. Just to many really good clones including really good Rolex paperwork that looks authentic. Whilst on the subject of Rolex for some reason there is a shortage and some are purchasing and re selling at double what was paid. Plenty of  examples on eBay . Noticed in our local jewellers Rolex’s are now for display only there is a waiting list. 

Edited by clockboy
  • Like 1
Link to comment
Share on other sites

  • 8 months later...

I see no point to avoid fake watches. I bjuy them myself. Last week I've bought rolex watch replica and no one could tell the difference. Watch replicas are usually less expensive than the authentic luxury watches, making them more accessible to a wider range of consumers. Additionally, replicas are mosly made with high-quality materials and craftsmanship, making them look very similar to the genuine item. They can also be a good way for people to test out different styles and designs before committing to a more expensive purchase.

Edited by kerrmbit
Link to comment
Share on other sites

32 minutes ago, kerrmbit said:

They can also be a good way for people to test out different styles and designs before committing to a more expensive purchase.

Then buy a cheap watch from a branded manufacturer that looks like a Rolex, there are plenty out there. Or better yet, build an homage.

I wouldn't knowingly buy a counterfeit purely because I don't want to put money into the hands of counterfeiters. Not that Rolex is struggling for money. But if you're trying to get unsuspecting people to buy something that isn't what they expect it to be and making them pay more than the sum of its parts just because you put someone else's logo on it, that's criminal, and I don't want to be part of encouraging that.

Edited by lexacat
  • Like 4
Link to comment
Share on other sites

  • 8 months later...

Hey there, Karl! I totally get that feeling when something seems off. Checked out the link, and the watch does seem a bit fishy. Trust your instincts – Rolex replicas are everywhere, and it's crucial to help each other spot them. However, I know there are also Patek Philippe replica watch, which is highly realistic, too. If you want a real one, it's better to learn more and find out.

Edited by kerrmbit
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Saturday morning 27/4 Sunday evening 28/4 Monday evening 29/4 Floor has a drain in the middle so I am hoping that there is very little fall on it, if any.
    • This makes much more sense now, the oil is withdrawing itself to make as little contact with the epilame as possible. Same principle as wax on a car creates a hyrophobic surface that makes the cohesive properties of water molecules pull together.  The water beads run off only when under the influence of gravity but still remain cohesively beaded up. And as mentioned earlier a pivot would keep the oil in place on a cap jewel.  Epilame on an escapement would be a different scenario, there is nothing to hold the oil in position if gravity tugs at the bead to move, plus the escape teeth pull the oil about Maybe this is why its suggested to run the watch for a short while to remove the epilame to make two oleophobic surfaces either side of the oil, creating a ring of fire 🔥 around it 😅
    • As with every skill it watchmaking, it takes practice. Notice at the top of the document it says, "Practical work - 40 hours".  I can get the balance wheels 'close enough' to flat, but never seem to get them perfect. Same with gear wheels. Guess I need more practice.
    • Has it got a beat adjustment on the platform or is it a fixed hairspring? in short what you are looking at to get it just about in beat is to get the roller jewel sitting dead centre between the banking pins. So remove the platform and take of the pallet fork and escape wheel to give you clear line of site, sit the platform with the balance in place and with it level look between the banking pins and see if the roller jewel is sitting between them, if it is nice and central its there or there abouts in beat, if its not the the position of the pinned end of the hairspring needs to be adjusted to move the roller jewel into the correct position, thats why I asked if it has an adjustment on the platform or not, if it has its an easier job. 
    • I've managed to adjust it. I'm going to try and explain it as well as I can with my limited horology knowledge but I hope it helps someone in the future. There is a cam to the right of the front plate as shown in the picture. As the clock ticks along, the pin indicated in the gear comes around and slots into one of the silencer cam gaps, turning the cam. The pin completes a full rotation in 2 hours. To adjust the cam to start at the right time set the clock to just before 7. I did 6:45. Then I turned the silencer cam anticlockwise, which spins freely, until it pushed the silencer lever up and was placed just before the drop. Just before the 7AM indicated in the picture. All I then had to do was progress the hands to 7-7:15which made the pin slot into the silencer cam gap and turn the cam so the lever comes down again, unsilencing the clock. That was it. If anyone comes across this issue again I'd be happy to assist. Thanks again to everyone that helped. Hey Transporter! Thanks a lot for the reply. That was a really good explanation and I'm sure it would have made my troubleshooting a lot less painful haha. I'm sure someone will find it useful in the future. Thank you again for taking the time to try and help me out with this.
×
×
  • Create New...