Jump to content

Hello from somewhere in the Cotswolds, UK...

DigitalM

By DigitalM
in Introduce Yourself Here

 Share

Recommended Posts

DigitalM New Member

DigitalM

Posted
Posted (edited)

Hi everyone

I started watching lots of youtube watchmaking vids during covid lockdown to get away from the horror and unbearable news that was unfolding. I'm in my 50's and had a fairly scary early encounter with covid, coming down with it a few months into lockdown as my daughter, who still lives at home and works in the care sector with elderly people, was exposed to it due to all the hospitals discharging patients back into care without thorough checks first. People like 'nekkid watchmaker' and 'wristwatch revival' really helped me to get through, with their love of the craft, natural enthusiasm and gentle humour, in a subject that was a million miles away from the 24/7 covid news misery.

I took one of Mark's courses which was excellent and very easy to follow. I grabbed an ETA 6498 (seagull variant) and tried to disassemble along with the guide. I had such problems with one of the shock springs, eventually losing it, along with the jewel, "somewhere", that it quite disheartened me. Things then got really busy with work for quite a while, and while I carried on watching and enjoying my youtube subs, I left the ambition of watch tinkering to one side.

I think I'm ready to have another go as a while back I bought another whole seagull movement because I couldn't figure out how to buy the new bits – I would have asked for help here but couldn't join this forum for some bizarre email related reason, but thankfully that's been resolved and here I am, saying hi!

I'm frankly scared half to death that I'll just ping another part into oblivion. I'm sure some people won't understand faltering over such a thing, I'm probably just not blessed with confidence on this sort of micro-scale operation, maybe it's because my vision isn't what it once was. I don't seem to have this sort of a nervous issue with almost anything else!

Reading all that back it all sounds a bit of a downer. It wasn't meant to be. Quite the opposite. I can't tell you how much I'm fascinated with the mechanisms and procedures, and I'm very grateful to those who put such great content up - it does way more good in the world than just teaching people about watch repair and servicing. 

Anyway, hello! And thanks for letting me get that off my chest 😆

Edited by DigitalM
grammar!
Link to comment
Share on other sites
grsnovi Distinguished Member

grsnovi

Posted
Posted
2 hours ago, DigitalM said:

People like 'nekkid watchmaker' and 'wristwatch revival' really helped me...

Welcome to WRT @DigitalM ! 

Those two guys probably are responsible for me being here.

I'm stalled partially through my first watch movement restore due to waiting on oils and tools (all of which should be on their way). Hopefully you'll decide to find a real watch that you'll take on as your first restoration. I decided to skip Mark's walk through and dive in. I have a 2nd grade 313 Elgin in the wings in case things go horrible with my first and I have a Buren 10.5 Grand Prix on the way.

I keep hoping that I'll find something amazing on eBay for cheap that will allow me to wear something that I brought back from the dead that I can be proud of.

  • Like 1
Link to comment
Share on other sites
  • 1 month later...
Michael1962 Distinguished Member

Michael1962

Posted
Posted

Welcome to the forum @DigitalM

Don't worry about your post and how you think it reads. I have done it as well and I was only looking at doing clocks. Not the microscopic world of watches yet.

It is very easy to forget that you are watching a watch be repaired and it is filling a 14" laptop screen when in reality that enormous picture is actually only about 32mm across.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tomh207
      Dg2813 chinese clone

      By tomh207 · Posted

      Hi Murks, I would just measure the old spring and order a generic one closest I can to size. Especially on thickness and height, length doesn’t matter so much as long as the difference isn’t huge.   Tom
    • tomh207
      Seiko 7005-7100 Crystal replacement

      By tomh207 · Posted

      As it’s Seiko have you tried a search in cousinsuk crystal section using the case reference?   Tom Had a Quick Look, 310W13GN00 looks like the part number you need but every listing I have found is a discontinued line. You might want to measure up the one you have and look through the sternkruetz catalog, here is a download link http://www.sternkreuz.de/accordion/assets/Sternkreuz_Gesamtkatalog G22.pdf   Tom
    • rjenkinsgb
      Bezel removal tool (chinese) problems

      By rjenkinsgb · Posted

      I've got a similar one, but never had to use it yet. I would try a couple of M4 (or whichever) washers under each blade, and possibly longer countersunk machine screws, either hex or torx drive so the blades can be really solidly locked down. It does not appear there can be much depth of thread in the blocks above the slide shafts, so matching the screw length to the blade height is probably quite important.
    • rjenkinsgb
      2650G "successful" disassembly and reassembly

      By rjenkinsgb · Posted

      Don't the holders have different sizes front & back? I started out with some cheap cast metal ones, but had a lot of trouble with the movements coming loose, so I got a pair of Bergen ones from cousins, a 4039 and a 4040. Those a well made, properly machines and between them they cover from around 10mm up to all the pocket watches I've had so far.  
    • levic900rr
      Seiko 7005-7100 Crystal replacement

      By levic900rr · Posted

      Hi Friends, As you might have seen yesterday I'm on to my second restoration and its a Seiko from the 70's (i'm pretty sure) I need to source a new Crystal but I'm struggling to figure out how to identify what type it is. (I did some forum searching but couldnt come up with anything) I'm pretty sure its mineral glass (and that lines up with what I've read online) the outside is flat, there is a pretty good sized bevel around he outside edge, but the inside is surface is concave. It measures 31mm in diameter, and at its thickest (around the edge) its 2.1mm. I was hoping to hop on Esslinger to order up a replacement but that hasn't worked out. I can't find anything of this style.  Any ideas? Thanks so much. 
×
×
  • Create New...