Jump to content

Recommended Posts

Posted

So I have a Fossil watch that I've had for years, bought in the USA.

Now this watch has a cracked glass that I don't know whether to replace or repair I do believe the glass is mineral. So yesterday I bought a white version of the same watch to repair (practice on) with the Idea of giving it to my son as he like's the black version of this watch.

 

I do have a question or two 

How do I remove the glass, as you can see it is a domed shape and the bezel (I think) that is what the outer ring around the glass is called.

second question

where do I get a repair epoxy kit from and what is the best.

Just out of interest is this the tool required to remove the glass https://www.amazon.co.uk/Opener-Remover-Repairing-Watchmaker-Removal/dp/B07Q8JTZQM/ref=rvi_12/258-7200769-0422933?pd_rd_w=VeYul&pf_rd_p=febd3956-4d60-4288-b8f2-cb468eb6674d&pf_rd_r=SMTV1AJCB712T4PSKAS8&pd_rd_r=f03a65bc-5611-4b8a-a520-4beb588351ab&pd_rd_wg=BKFao&pd_rd_i=B07Q8JTZQM&psc=1

or this one 

https://www.amazon.co.uk/Professional-Plastic-Crystal-Glasses-Remover/dp/B09MW3LCMD/ref=rvi_18/258-7200769-0422933?pd_rd_w=YWUSg&pf_rd_p=febd3956-4d60-4288-b8f2-cb468eb6674d&pf_rd_r=PYNXSV334XR0DAPKYAEY&pd_rd_r=2cd50d01-f95f-47f0-bc2c-02f49cf90a95&pd_rd_wg=2uMDg&pd_rd_i=B09MW3LCMD&psc=1

 

thank you

Fossil.jpg

fossil-grant-automatic-black-skeleton-dial-mens-watch-me3055.jpg

Posted

Please don’t buy either tool. They are useless. You need to remove the movement and then simply push the crystal out. You will or may however need a crystal press to put in the new crystal.

  • Like 2
Posted

That first tool is better suited to removing bezels or backs.  And not by much.  The crystal itself would still need to be taken out.
That second tool is a (lower priced) crystal lift.  It is used for domed plastic crystals that need to be compressed all around their edge to be fitted into their case.  Yours is not that kind.
As jdrichard said, these tools won't do what you need.  But once the movement is out, you can push out the crystal from the inside.  I wear nitrile gloves when I do that; I've had them crack sometimes.
Then, the tool that jdrichard describes, the crystal press, uses plastic dies to press the crystal into the case.  Measure the old crystal carefully (if it comes out whole) with a digital caliper and get that exact diameter, and thickness.

  • Like 2
Posted

Save the dial plate. 

Uncase the movement with dial and hands attached, the glass then can be pushed out (by your thumb) from inside of the case. 

Make as many mistakes as you like when installing the glass without damage to the dial and movement.🤠

Epoxy five will do.

  • Like 1
Posted

I'm so thankful for all the help. I have just ordered a press after reading the recommendations given in the above post's/reply's 

 

where is the best place to buy watch glass from? 

Posted

Second the above comments.  As crystals are normally very low cost items, I always buy a size up and down, just in case.  The cost of the crystals is generally cheaper than just the postage for another crystal anyway.

  • Like 1
  • 2 months later...
Posted

Morning all. well all finished now both watches have had new crystal glass fitted. the black one I washed in the sonic cleaner yesterday, I wasn't expecting the amount of dirt that came of it, I even found a shell of a ladybird or something floating in the cleaning solution.  

 

20220507_132729.thumb.jpg.42f69d97c18fc17f44e3d2cb2bc916ff.jpg

 

but thinking about it I really think I bought a polish for metal while I was at a flea market some time but anyway I didn't except the amount of dirt. The white face watch was bought on ebay just to practice on before I opened up the black one.

20220507_132755.thumb.jpg.28751b32880b2574efb25781f26b604b.jpg

 

This was the best move I ever made because on removing the stem I didn't pull it to time setting so I had to strip down face side to address the reason it wouldn't accept the stem. I'm really pleased to say that both watch are all cleaned and back together.

 

I bought the black faced fossil while on holiday well the wife bought it for me so it will always have a special place in my heart. 

  • Like 5
Posted (edited)
On 2/25/2022 at 11:36 AM, Tiny said:

So I have a Fossil watch that I've had for years, bought in the USA.

Now this watch has a cracked glass that I don't know whether to replace or repair I do believe the glass is mineral. So yesterday I bought a white version of the same watch to repair (practice on) with the Idea of giving it to my son as he like's the black version of this watch.

 

I do have a question or two 

How do I remove the glass, as you can see it is a domed shape and the bezel (I think) that is what the outer ring around the glass is called.

second question

where do I get a repair epoxy kit from and what is the best.

Just out of interest is this the tool required to remove the glass https://www.amazon.co.uk/Opener-Remover-Repairing-Watchmaker-Removal/dp/B07Q8JTZQM/ref=rvi_12/258-7200769-0422933?pd_rd_w=VeYul&pf_rd_p=febd3956-4d60-4288-b8f2-cb468eb6674d&pf_rd_r=SMTV1AJCB712T4PSKAS8&pd_rd_r=f03a65bc-5611-4b8a-a520-4beb588351ab&pd_rd_wg=BKFao&pd_rd_i=B07Q8JTZQM&psc=1

or this one 

https://www.amazon.co.uk/Professional-Plastic-Crystal-Glasses-Remover/dp/B09MW3LCMD/ref=rvi_18/258-7200769-0422933?pd_rd_w=YWUSg&pf_rd_p=febd3956-4d60-4288-b8f2-cb468eb6674d&pf_rd_r=PYNXSV334XR0DAPKYAEY&pd_rd_r=2cd50d01-f95f-47f0-bc2c-02f49cf90a95&pd_rd_wg=2uMDg&pd_rd_i=B09MW3LCMD&psc=1

 

thank you

Fossil.jpg

fossil-grant-automatic-black-skeleton-dial-mens-watch-me3055.jpg

Hiya T. Doin ? Mate. The first one is a fancy gadget used to remove a bezel you can use a nice fine sharp case knife. You can also buy single edge razor blades that fit  into a blade holder, normally used to remove paint from glass but not always strong enough and may break if the bezel is tight.Or I use a flat blade that fits into a craft knife that I think was a pound or so. I'll stick a photo on later when I get home. The other is a crystal lift, they aren't bad but you would be best to buy a good quality.  I have a second  hand bergeon which seems good. The glass should push out with some strong pinkies if you actually have a removable bezel. If you can't push it out by hand then a glass press insert to tap it out.  When putting back, if it's a flat mineral then a glass press, if acrylic then it is possible to squeeze them in by hand if you have superman fingers like me lol. If domed and you dont fancy hand pressing in then I find a crystal lift good for taking off and putting back, but that all depends on your dome height and if it will grab the edge of the crystal

Edited by Neverenoughwatches
  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I’m not to sure mate! I’ve sent a picture! The crown is off a Tissot 1853 automatic limited edition T115427 A GP19 moto go watch!   
    • For years and I'm still using it I've been using something called SeaMonkey? It's a Mozilla product Basically outscore its Firefox plus an integrated email program. But not the same problems here a lot of times when things are upgraded they tend to be now aimed at very specific browsers like Firefox so I've had to switch to Firefox to respond to any of the messages on the group. So yes they do seem to be getting more browser specific and that may be a reason for others having complications especially if whatever you using hasn't been updated. So yes the world is getting more browser specific perhaps for security reasons. Even though I use a product that is updated on a regular basis is still has problems. So whatever you using for browser should be up to date and if is not recognized it's going to be a problem.
    • I did remember to ask at work and minor complication? Well I suppose technically two separate complications. First off glass mineral glass versus Seiko's Hardlex Glass. Don't know if other companies have their own class or not and a basic class for crystals is probably not the same as window glass it would be more transparent. It becomes obvious if you're looking at a sheet of flat crystal glass versus window glass it's definitely more transparent you can see it when you look at the edges of it window glass looks green. No idea how that changes physical characteristics other than optical. Then we also have thickness like the Seiko five's there crystals are really sick compared to other things and I'm guessing that makes things different. In the first link it talks about Sapphire versus mineral glass. One other thing is bothering me though when I'm reading this is where is the source material? What I mean by this is could we end up with multiple generations of salespeople quoting the same sales tactic or information and we don't actually know because you don't have a source reference? Let me quote something off the website it's brittle oh dear I was sad? Except it's not immune to damage it can crack where shatter under extreme force or impact. So what is the definition of extreme force or impact? Then is that more or less extreme then mineral glass?  Then regarding the price difference while back I had asked the owner where the Sapphire came from and basically wherever he can get the cheapest. So typically ordered from a variety of online supply watch parts in the US and  aliexpress China.. Then yes it does make a difference because we go through a lot of glass crystals and sapphire https://thehorologylab.com/sapphire-crystal-vs-mineral-glass-which-is-best-for-your-watch#google_vignette Then I guess one is glass not glass when it goes by another name? Hardlex Looks like it's purely a Seiko product but now I wonder if other watch companies have their own special glass? I didn't remember from past experience my favorite was people exposed to welding you can find little blobs a metal stuck to the watch case the crystal still intact but there's little burnt holes were bits of metal had actually burnt into the crystal but it was still there. Okay website below starts off with Sapphire sounds good but Apparently it can shatter easier then Hardlex. https://theslenderwrist.com/hardlex-crystal/ One other thing is what I'm reading to websites would be back to I want to see the test results? Often times weren't looking for a subject will find websites where I basically called them these are better than that by the way but sometimes I'll find websites that I will call book review websites were basically the review other websites other material and don't really introduce anything new to the subject. As I said these websites look quite nice which is why I'm giving you a link but where's the test results the definition of extreme how extreme to break a sapphire versus a glass or Hardlex?  
    • What browser are you using Rich? Fine for me using Chrome 
    • Wiggle it back and forth, small steps, keeping the pallet cock as level as possible and take your time (!). You could also use an extra tool as a safeguard at the jewelled end to avoid pressure on the pallet fork. You also mention lubrication... On the pallet fork pivots??
×
×
  • Create New...