Nathan Posted May 10, 2015 Share Posted May 10, 2015 my late wife's grandfather left a few watches for her and now I am wondering if they should be serviced. The Voumard 2000 is running but I keep remembering the old saying, "if it ain't broke, don't fix it". I have not installed a battery in the Benrus so I don't know if it will run. Also, if I do open up the Voumard case, is there any precautions with the unusual winding steam I should know about? Quote Link to comment Share on other sites More sharing options...
clockboy Posted May 10, 2015 Share Posted May 10, 2015 These watches obviously have some sentimental value so if I was you I would leave the servicing until you have more experience. Quote Link to comment Share on other sites More sharing options...
Nathan Posted May 10, 2015 Author Share Posted May 10, 2015 Oh, I would not attempt to do the work myself at this stage of my experience. I was just wondering if letting the Voumard run without being serviced would hurt it. Quote Link to comment Share on other sites More sharing options...
Nathan Posted May 10, 2015 Author Share Posted May 10, 2015 A question about the Benrus. When I pull out the stem and move the hands, the second had go whizzing around but only if turning the hands clockwise. Is this a normal thing? Quote Link to comment Share on other sites More sharing options...
WillFly Posted May 11, 2015 Share Posted May 11, 2015 I'm not familiar with Benrus movements, but a thought occurs to me. If the second hand moves when the watch is wound clockwise - and remains still when the watch is wound anti-clockwise - then this just may be a way to set the time exactly to the second. Some watches have a hack function, which allows the second hand to be stopped when the crown is pulled out - thus allowing exact time to be set. So, on your Benrus - when fully wound down - you could pull out the stem, wind clockwise until the second hand is set to the 12 position, then wind anti-clockwise to set the hour and minute hands. Result? Time set exactly. Ā This is just a theory - I don't know the watch in question - might just be a (useful) fault! 1 Quote Link to comment Share on other sites More sharing options...
anilv Posted May 11, 2015 Share Posted May 11, 2015 Hi Nathan, Ā If the Voumard is going to be an 'occasional' watch , ie only worn for special occasions like dinners, then by all means go for it. Ā If you're going to wear it for a longer period..say a few days at a time then it should be serviced. Ā Re the crown on the back...If I'm not mistaken the winding gears come off with the caseback.. the watch is then serviced normally. Servicing is not really an issue but if parts are required then it could be a problem chasing them down. Ā Anil Quote Link to comment Share on other sites More sharing options...
Nathan Posted May 11, 2015 Author Share Posted May 11, 2015 Thanks for the info Willfly. I tried turning the stem just very slightly so as to get the second hand in the twelve o'clock position. It is almost impossible to do. Just the smallest turn of the stem send the second hand flying around the dial. Quote Link to comment Share on other sites More sharing options...
matabog Posted June 3, 2015 Share Posted June 3, 2015 If the seconds hand moves when you turn your watch it is a good thing: first- you have enough friction on your clutch (friction pinion), and second- if you need that small force to make it moving, then the wheel train is ok, the pallets are ok. All it needs is a bath and oil! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.