Jump to content

Any idea what this is?


Recommended Posts

  • Woolshire changed the title to Any idea what this is?

Unhelpful answer it looks like it's part of something else. One of the problems with watchmaker's are they like to accumulate things all sorts of things a lot of the things we accumulate may or may not have anything to do with watch repair. Then watchmakers also like to acquire stuff from other watchmakers this means you accumulate all kinds of mystery tools that were mysteries to others. This is where if you have access to meetings with other watchmakers occasion They will have a meeting to discuss the mystery tools and see if anyone knows what they are or not.

You have something that looks like it's part of a microscope of some sorts perhaps if you're lucky someone will recognize what it really is.

Link to comment
Share on other sites

It's in metric as well which I would think is unusual for England? Well, England from a long time ago.

I believe (well the Internet said it so it must be true) that the metric system began to be used after 1965? It doesn't seem to have any way to be attached to a machine. In the first photo and the photo from the bottom, it looks like it has holes for mounting it to a bench.

After that, who knows. Maybe it's is just a doohickey?

Link to comment
Share on other sites

3 hours ago, Michael1962 said:

It's in metric as well which I would think is unusual for England? Well, England from a long time ago.
I believe (well the Internet said it so it must be true) that the metric system began to be used after 1965?

To know if it's really metric one should check the leadscrews. The scales are just applied tags which may vary.

Certain industries, e.g. some (but not all) American watch factories had adopted the metric system already in 1800s. The UK is metric on paper but some people, e.g. hobby machinists on YouTube or equipment sellers are still stubbornly Imperial. And now after Brexit U.K consumers can finally see pounds and ounces prominently displayed on products, for ease of calculation.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That's the right technique Mal 👍 If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean. Something like this, but tbh its better to just learn to do with your fingers.
    • Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
×
×
  • Create New...