Jump to content

What the hell am I doing wrong


Paul80

Recommended Posts

  • 4 months later...

The Curse has struck again.

This time I had a 7009A that needed a new Balance, (Its spring was damaged). I bought a brand new Balance which arrived this morning and a quick inspection prior to fitting it revealed the impulse jewel is missing, this is a brand new sealed in its packet item.  Think someone is trying to tell me something 😞

I think I will give up with the 7009A movement now.

Link to comment
Share on other sites

15 minutes ago, Paul80 said:

The Curse has struck again.

This time I had a 7009A that needed a new Balance, (Its spring was damaged). I bought a brand new Balance which arrived this morning and a quick inspection prior to fitting it revealed the impulse jewel is missing, this is a brand new sealed in its packet item.  Think someone is trying to tell me something 😞

I think I will give up with the 7009A movement now.

Never had a problem with Seiko parts. Is there any sign of shellac/glue ?

Where did you buy the part ?

For second hand Seiko parts, a useful source is https://speedtimerkollektion.com/ , they have complete balance+cock for about 6 euro.

Link to comment
Share on other sites

1 hour ago, Paul80 said:

The ones speedtimerkollektion sells for 6 are actually broken, his good ones are about 17 and up. Which was why I tried a brand new one from Cousins also at 17.

Report it as a fault to Cousins. You may get a refund. 

Link to comment
Share on other sites

On 10/1/2021 at 11:11 PM, Paul80 said:

the 7009A, out of the 5 I got working The same thing has happened to 4 of them and that is after working fine for 4 to 6 weeks they suddenly just stop and when I check they have all stopped for the same reason and that is the impulse jewel has fallen out of the balance.

 

On 10/1/2021 at 11:11 PM, Paul80 said:

Today's one I did manage to find the jewel and under the microscope managed to get the jewel back in with drop of shellac to hold it in place

This is a fairly modern calibre from the 1970s. When I started out servicing/repairing I was under the impression that all impulse jewels (just like pallet jewels) were always fixated with shellac. That is until @nickelsilver mentioned that the impulse jewel on most (all?) modern calibres is friction fitted (if I recollect correctly?). What makes you think that the impulse jewel is fixated with shellac on the 7009A (except for the fact that they're falling out)?

Don't think my reflection will shed any new light on the problem, but I'm curious...

Link to comment
Share on other sites

  • 1 month later...

I have found a low cost solution to fixing my problem with these Balance's

I found a couple of sellers on Aliexpress with Balances for the 7009 and at only £2.50 it was worth a punt to see if they were any good or even if they fitted.

First batch arrived and I have fitted a couple of them and sofar everything is working well, so for now the problem is resolved, unless they also loose their impulse jewel in a few weeks like the old seiko ones did. still £2.50 is much better than £17.99 that Seiko ones cost.

Will update the post in a few months if they are still working or have also failed but looking good sofar.

Paul

Link to comment
Share on other sites

1 hour ago, Paul80 said:

I have found a low cost solution to fixing my problem with these Balance's

I found a couple of sellers on Aliexpress with Balances for the 7009 and at only £2.50 it was worth a punt to see if they were any good or even if they fitted.

First batch arrived and I have fitted a couple of them and sofar everything is working well, so for now the problem is resolved, unless they also loose their impulse jewel in a few weeks like the old seiko ones did. still £2.50 is much better than £17.99 that Seiko ones cost.

Will update the post in a few months if they are still working or have also failed but looking good sofar.

Paul

I'd never thought of looking on Aliexpress for balances, they're amazingly cheap. How do they look for quality close up?

Do you have a timegrapher - be interesting to see how it performs in different positions.

Edited by mikepilk
Link to comment
Share on other sites

1 hour ago, mikepilk said:

I'd never thought of looking on Aliexpress for balances, they're amazingly cheap. How do they look for quality close up?

These have been mentioned in previously, hard to find topic. The person reporting said some didn't even really work, like hit and miss. 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Ah so its you thats buying up all the DD calibres 🤨.
    • Hi Richard,  I keep buying CAL.59 movements to practice on 🙂 Not started yet though, I'm gathering tools and building my confidence to start.
    • Problem solved. For some bizarre reason, the hook on the wall of this barrel is not properly centered vertically, but is oddly high on the wall, maybe 3/4 up the way up. When replacing the mainspring, this caused the outer coil to be displaced upwards as well such that it protrudes out of the barrel and caused the barrel lid to not sit quite flush to the barrel. Since this is a motor barrel, the lid is actually the first wheel and inner coil tube/hook all in one piece, with no “snap down” action that would have made the problem more immediately obvious. Maybe with an older mainspring the spring’s end hole was enlarged such that this wasn’t an issue, but hard to say how it ever worked otherwise. Replacing the barrel with one from a different model 1900 where the hook was properly vertically centered allowed the lid to sit flush without mainspring interference and the friction problem went away. The bridge was far too thick to be bent (and isn’t), for those of you thinking that was the problem. Placing the removable arbor in the watch without the rest of the barrel proved that the proper end shake was actually there as long as the overall height of the assembled barrel was correct.
    • You are so true on a lot of what you have said. The main reason for changing the mainspring even if the old one is in good order is because it will take out your thinking that the mainspring is contributing to poor power output or fluctuations in amplitude. If a new spring is fitted that box can be crossed off as a potential source of a problem. Most customers are happy to pay the extra £20 for a new mainspring if they are already parting with a couple of hundred pounds for a service. A new spring is an investment for good running for the future.
    • According to Borel the 814 and 815 use the same escape wheel. It's kind of an oddball being so long.
×
×
  • Create New...