Jump to content

Uncovered Gear Train Wheels, Strange?

Ishima
 Share

Recommended Posts

Ishima Super WRT Addict

Ishima

Posted
Posted (edited)

Recently a customer came to us with a rather old and inexpensive Avia watch that had a rather peculiar ETA movement in it, 455.111 (maybe a 450.111) I believe was its serial, but I may have miss-remembered that. 

I took a picture with what I had to hand, so it's a bit blurry, but take a look. 

eSFmKl8.jpg
Perhaps the gasket should have been cleaned before the picture instead of after, hmn.

Anyway, as you can see a couple of the gear train wheels are not covered by any bridge or cock. 
At first I thought perhaps it had been cowboy'd and I was in for a little problem but then i could see no fixtures to hold a bridge, and could see no pivots, so it had to be by design, sure enough it worked okay once I carefully changed the battery. (you can see the wheels are unnervingly close to the battery.)

But I couldn't think of a time when I'd seen anything like this, is this as unusual as i think?, or is this an established way of configuring the gear train that I just by fluke hadn't seen til now? any thoughts or insights?
 

Edited by Ishima
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Marc
      Seitz Tool - Help determine if Seitz or not

      By Marc · Posted

      I have two Seitz sets, one ancient (with the 3mm anvils) and one just old (with 4mm anvils) plus a collection of spare pushers of assorted vintage. Not one of them is marked with it's size. Something which I have found very irritating when I have been using the tool and not returning pushers to their correct place in the tray every time as it means that I have to get the calipers out and measure them. These were bought as sets and collectively I have over 100 pushers so it would seem highly unlikely (if not inconceivable) that they are all cheap knock offs, especially as they are old enough to pre-date the prevalence of the Chinese knock off industry (at least as applied to watch making tools). I therefore believe them to be original Seitz parts. And there is no numbering. The shape of the bottom of the pump pushers is the same as your photo. The only thing that may not be the same is that the slotted insert (looks like a screw but is in fact a bayonet) should be brass. Yours looks the same colour as the steel but that could just be the lighting.
    • deni2s
      RANFFT Database is down!!

      By deni2s · Posted

      The original database is available on iOS devices here: https://apps.apple.com/fi/app/ranfft-watch-movements-archive/id6502008939
    • oldhippy
      Seitz Tool - Help determine if Seitz or not

      By oldhippy · Posted

      I no longer have my set so I can't help anymore sorry. Many on here have the set as its a must have tool for watch making/ repair.
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      It needs to be stirred before use and that makes it feel a lot thinner than when in the bottle. Does it feel as thin as 9010 after stirring it? I guess not! Yes, it's strange! I don't know, but if it is on impact it would make sense.
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Thanks, OH! I agree with you. I'm currently looking at them under magnification, and they are consistent in shape and form for each section (flat pushers, pump pushers, concave, reamers, etc.). Though, a few are in bad condition and need to be replaced.  Before I cancel the return I have already initiated on eBay, can any of our members check to see if there are inconsistencies in markings on their sets? Also, I have included a snapshot of the bottom of one of the pump pushers, which are very unique in shape.  Can someone tell me if the bottoms of their pump pushers match this photo?  I'm hoping that Seitz had some inconsistencies in manufacturing over the years regarding markings.  Crossing my fingers. I appreciate you guys. Frank
×
×
  • Create New...