Jump to content

Fusee


Willow

Recommended Posts

2 hours ago, oldhippy said:

That is what it would look like when it was new and it would look like that re silvered. 

 

2 hours ago, oldhippy said:

That is what it would look like when it was new and it would look like that re silvered. 

but once it has been re silvered what about the numbers how do you get the numbers on

Link to comment
Share on other sites

Well my new mainspring arrived today my question is can i put it halfway in the barrel take the wire off thats retaining it push it all the way in and then oil it or will it have to be completely unwound then cleaned and oiled

Link to comment
Share on other sites

  • 2 weeks later...

Well finally got time to work on my Tameside clock decided to put the new mainspring back in the barrel with Ollie Baker Winder, and i was having a problem getting it in the barrel with the retainer i used to take it out it was to big so ended up putting the next size down but that was to small i then had the problem with getting the arbor to catch so i thought what a good idea if i got smooth nose pliers to hook it on ?and i ended up snapping a bit of spring off?take it easy with me just wondering if it could be salvage or is it another new mainspring at £42 a go.What do they say about you learn from your mistakes.

IMG_20210430_100247323_HDR.jpg

IMG_20210430_100304587_HDR.jpg

  • Sad 2
Link to comment
Share on other sites

Hi forgot to ask what can i do if the sleeves i have are to big or to small when i am trying to put the spring back into the barrel can you buy different sizes i have 9 that came with the winder but i don't seem to have the right one even though the sleeve i used i managed to take it out, so i am going to have the same problem getting it in the barrel. Will i have to take it to a clock repairer?

Link to comment
Share on other sites

16 minutes ago, Tmuir said:

You may need to make another sleeve, see if you can get lucky and find some brass or steel tube that is the correct size to make another sleeve.

If only i could no room in my house and only have a small garden,so it's hoping i can get the right size or it will be off to the clock man or women repairer, just re-read your reply and i think i know what you mean i will have a look around and see if can find some steel thanks Tmuir

Edited by Willow
Re-read reply
Link to comment
Share on other sites

Decided to contact a clock repairer who has a shop in Warrington about 1/2 hour to see if he will put the spring in the barrel for me  just sent him an e-mail see if he replies not holding much hope though,if not i no you advised me not to do it oldhippy i will just have to put the spring in the barrel and hope it catches let you know.

Link to comment
Share on other sites

Hi just interested on your opinion on this article i found about inserting springs into a fusee clock barrel and greasing i thought you only put small dabs of oil on the spring he has smeared a lot of grease on them. He also uses phosphor bronze  not gut or nylon as gut snaps and nylon stretches.Now i am tottally confused.I have tried to insert a link never done it before. https://www.clockrepaircumbria.co.uk/post/2017/11/22/the-fusee-clock-mechanism

Link to comment
Share on other sites

Does he think he is greasing a bloody car engine, talk about over the top if he goes about it like that with all his clock mainsprings he must use pots of the stuff. Disregard what he has done.

The bronze line isn’t correct. When the fusse was invented cat gut or a chain would be used, but you cannot use a fusse chain on a fusse that has been made to take a line, the groves are a different cut. Cat gut would have been used as the line. The nearest you can get today is the synthetic gut. He contradicts himself by saying about how you should go about preserving the originality of the clock and he does the complete opposite. I had a preference to use nylon coated wire line, that is what I would use, but I always asked the customer what they wanted.

On Vienna regulator clocks you should always use synthetic gut.   

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The cannon pinion (be it conventional style or what you see in this movement) should slip on its arbour so the hands can be set independently without affecting the gear train.  If there is too much friction between the cannon pinion and the second wheel, turning the hands to set them backwards can sometimes force the escape wheel teeth to overrun the pallet stones, creating the behaviour you describe. The train is running in reverse when this happens.  This can often chip the pallet stones. I’d say at least half of the watches I’ve inspected with very tight cannon pinions had chipped pallet stones. Hopefully this isn’t the case with your watch.  I’m not familiar with this movement but you need to get the friction in the cannon pinion adjusted correctly.  Hope this helps, Mark
    • Pallet fork was in. I’d had the movement running ok, and only removed the balance to flip it over and install the keyless works and date mechanism. The pallet fork wasn’t locking the gear train when hand setting - it was oscillating as the escape wheel rotated. This may have been in one direction only - can’t remember. 
    • Hi   Find attached parts/repair notes for the JLC 911,  might be useful. JLC_JLC 910, 911.pdf JLC_JLC 910, 911 Repair Notes.pdf
    • Hello and welcome to the forum Dan. Used to know Middlesboro quite well, that was twenty years plus ago. Attached a little reading to get you started. TZIllustratedGlossary.pdf
    • for the most part no. Each individual watchmaker and/or shop had their own system. One of the shops I worked at basically had a reference to a page number in a book. then there are some shops that do no markings at all as they keep their records on a computer and they don't have to mark the watch. Usually if somebody is marking and they've service the watch before you'll see those next to each other. then as far as anything resembling a standard goes at one time the American watch and clockmakers Institute assigned all of their members a number. but that was a very long time ago and I doubt that they are using it anymore.
×
×
  • Create New...