Jump to content

Anniversary Clock Running to Fast


Konrad

Recommended Posts

Hi all and a merry xmas. I have a Kern anniversary clock which I have restored. The clock runs well however runs extremely fast despite turning the adjustment +/- clockwise fully. I have had a look at past forums and note that it might possibly be an incorrect sized torsion spring/wire. I believe the current wire in the clock has been replaced by someone previously based on finger prints found on covering sleeve. The pendulum weights (4) turn approximately 120 degrees. Is anyone able to advise if I am correct or an alternative idea to correct problem? Would appreciate any help including the correct sized spring and where to find/buy them. Many thanks for any help given2130923817_DSCN06311.thumb.JPG.32f25583dcd44cd5a975fc1c93f1c92b.JPG1790354123_DSCN06301.thumb.JPG.36a4fb5000f0a5afb9160be17805180c.JPG.

Link to comment
Share on other sites

Hi If you can beg borrow or buy Charles Terwilligers book, the 10th edition  which is the bible on 400 day clocks, there is all the information you require, or as an alternative post a full picture of the back plate and members will be able to Identify the model and the spring type you require.

As Old Hippy said  the condition and length of the spring and its thickness and the positioning of the fork are critical to the operation              Happy New Year       all the best. 

 

Link to comment
Share on other sites

Oldhippy is correct it will almost certainly be a suspension spring fault. Too strong or too weak results in running out of adjustment. It is possible to thin the spring if careful. The method is to lay the spring on a flat surface and carefully stroke the spring with a fine Emery ie 2000 grit to remove material. BUT you must not kink the spring in anyway. 

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • The first one is an Unruh max stake for pushing out staffs
    • Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
    • When building a new Watch I have tended to use a file to remove the remnants of dial feet that are not needed as many dials come with four feet to accomodate different movements, but this can be a bit messy so now I use this with a great deal more precision as you can use an appropriate bit for the job and keep it very localised.      
×
×
  • Create New...