Jump to content

Mail-In Watch Repair businesses (USA)


Recommended Posts

I suspect that a lot of watch repair shops even those without Internet presence would probably do mail-order watch repair. Then it would probably help to know what kind of watch you have because a lot of shops specialize. 

Here is a shop in Seattle it has a really good reputation and I notice they do have a form to fill out online before sending your watch is so obviously they do mail-order business.

https://www.nesbitswatchservice.com/index.html

Then there are things like associations that list people at do watch repair But you probably have to reach out to them the CF they do mail order work but I would think most people today probably do.

https://awci.memberclicks.net/find-a-professional

Link to comment
Share on other sites

49 minutes ago, JohnR725 said:

I suspect that a lot of watch repair shops even those without Internet presence would probably do mail-order watch repair. Then it would probably help to know what kind of watch you have because a lot of shops specialize. 

Here is a shop in Seattle it has a really good reputation and I notice they do have a form to fill out online before sending your watch is so obviously they do mail-order business.

https://www.nesbitswatchservice.com/index.html

Then there are things like associations that list people at do watch repair But you probably have to reach out to them the CF they do mail order work but I would think most people today probably do.

https://awci.memberclicks.net/find-a-professional

 

So the watches I need to get serviced are from Orient. I just contacted Nesbit's watch Service about them and they had to decline the service because of potential lack of parts.

Link to comment
Share on other sites

6 hours ago, HighMans said:

So the watches I need to get serviced are from Orient. I just contacted Nesbit's watch Service about them and they had to decline the service because of potential lack of parts.

At least they gave you an answer as opposed to taking your watches and having them disappear into a black hole claiming they can get parts for you.

One of the major problems in watch repair is finding parts. If you look at their website they mainly specialize or at least appear to specialize in high-end Swiss watches.

Then out of curiosity do your watches from the Orient have a name on them?

Link to comment
Share on other sites

5 hours ago, Tudor said:

"Orient"

This name has come up before in the discussion group I think even a walk-through was done with one of them. This sort of kind of like Seiko it except they'd totally lack any serious technical support. In the way of parts lists service manuals are almost nonexistent. There are spare parts out there at least are listed on the sites that I'm currently looking at so some parts are available if you're lucky.

Then in the USA they even have a website and if you look out pathetic it is this is where you go to request service. It doesn't really jump off the website to get here either.

https://www.orientwatchusa.com/pages/service-return-request

Link to comment
Share on other sites

On 10/20/2020 at 12:22 AM, HighMans said:

So the watches I need to get serviced are from Orient. I just contacted Nesbit's watch Service about them and they had to decline the service because of potential lack of parts.

If I were a professional I would have no problem servicing watches for which parts are difficult or even impossible to obtain.

Just advise the customer of that possibility and establish a reasonable fee to be paid anyway in case the watch has to be returned in the same state as received, with a clear explanation of why the work couldn't be completed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hell0 @nevenbekriev. Thank you for your advice. I have removed the old setting using my staking set--I will keep the KIF spring, since it is still good.  I am awaiting the replacement setting, and will update when I do that. In the mean time, I looked at the escape wheel and it looks ok. What do you think?    
    • Aloha All, I recently bought this Seitz tool on eBay, but it is missing some pushers reamers.  I ended up ordering new parts for those that were missing before I received the actual Seitz tool (bad idea).   Upon inspecting the pushers/bits, I noticed 23 of the 56 provided with the set had no numbers. Further inspection revealed a huge difference in the quality of those unnumbered.  Do all Seitz pushers/bits have a number on them?  I'm pretty sure that 33 of the 56 I received are cheap Chinese knockoffs.  The worst part is that I ordered $80 of parts to replace the missing pushers/bits, and now I'm looking to return the tool. I'm not crazy, right? If these are Seitz parts, they should all be numbered, correct? The first two pictures are the Seitz (numbered), and the other pictures are the suspect parts.  Will I even be able to get a refund?  Thanks, Frank     
    • It was £10 + min fee, total £16, could not leave it there. Its a Stanton A.D.2. http://stanton-instruments.co.uk/
    • Chief- The picture below shows the three parts from the dial side that are most useful to "fingerprint" a movement in conjunction with the diameter of the movement.  That's why forum participants are always asking for dial side photos in posts asking for identification.  As far as the setting lever screw, it actually sits loose in the main plate. The threads engage the setting lever below, and the elongated stem above the shoulder sticks through a hole in one of the bridge plates so that it's held captive if unscrewed all the way.  So you may be fine as far as that goes. 
    • So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
×
×
  • Create New...