Jump to content

Adolf Schild AS 1916 SUMMIT Watch CO

JayG17
 Share

Recommended Posts

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

Did you release the barrel power through the click?

Check end and side shake on staff and all arbours before removal.

Good with tweezers and use of tools in general, checking date change, canon pinion tightness.:Bravo:

Regards

Link to comment
Share on other sites
Jon Super WRT Addict

Jon

Posted
Posted (edited)

Great video! I enjoyed watching you disassemble the watch.

If you're asking for comments and feedback, there are two things I would say...

You might find it easier and less likely to damage the movement or lose parts by putting the parts tray closer and to the side, as you are reaching over the movement to put the parts away .

One more thing is, get some descent tweezers. It'll make the process much easier and far more enjoyable with good tools. Yes, you can take apart and assemble with cheap tweezers, but you'll be surprised when you use a quality pair how the experience is totally different. Get a piece of folded over 1000 grit wet & dry paper with water and give the insides of the gripping face of the tweezers a slight brushed finish as you squeeze them together and draw the wet and dry through. It'll make gripping a different story as well! 

Apart from that, good job! Keep it up and look forward to seeing more of your work...

Edited by Jon
  • Like 1
Link to comment
Share on other sites
JayG17 Member

JayG17

Posted
  • Author
Posted
23 hours ago, Nucejoe said:

Did you release the barrel power through the click?

Check end and side shake on staff and all arbours before removal.

Good with tweezers and use of tools in general, checking date change, canon pinion tightness.:Bravo:

Regards

thank you for your support and advices I will work harder :)

Link to comment
Share on other sites
JayG17 Member

JayG17

Posted
  • Author
Posted
On 7/23/2020 at 8:57 PM, Jon said:

Great video! I enjoyed watching you disassemble the watch.

If you're asking for comments and feedback, there are two things I would say...

You might find it easier and less likely to damage the movement or lose parts by putting the parts tray closer and to the side, as you are reaching over the movement to put the parts away .

One more thing is, get some descent tweezers. It'll make the process much easier and far more enjoyable with good tools. Yes, you can take apart and assemble with cheap tweezers, but you'll be surprised when you use a quality pair how the experience is totally different. Get a piece of folded over 1000 grit wet & dry paper with water and give the insides of the gripping face of the tweezers a slight brushed finish as you squeeze them together and draw the wet and dry through. It'll make gripping a different story as well! 

Apart from that, good job! Keep it up and look forward to seeing more of your work...

thank you mr Jon for your precious advices. sanding the inner part of the tweezer make a lot of sense tho. I will find out soon.

beside I just bought a antimagnetic Dumont Swiss made tweezer and Bergeon antimagnetic screw drivers. hope my next video can come out any sooner. cheers 

Link to comment
Share on other sites
JayG17 Member

JayG17

Posted
  • Author
Posted
On 7/23/2020 at 8:55 PM, Nucejoe said:

Did you release the barrel power through the click?

Check end and side shake on staff and all arbours before removal.

Good with tweezers and use of tools in general, checking date change, canon pinion tightness.:Bravo:

Regards

barrel power was completely released before taking off. date day change at midnight and canon pinion is cool. now I having problem with the accuracy of the watches. not planning to buy a timegrapher machine yet so imma start with the timegrapher app. cheers sir :thumbsu:

Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi Watch-O-scope is a PC  oriented timgrapher software, available for download in its lite form the full licence is $40 lifetime , You to need to build a stand and amplifier. Have a look at it might be worth the effort.  the developer is a contributor and runs the site Vintage Watch Straps on which the is a wealth on information.      http://www.watchoscope.com/.

Link to comment
Share on other sites
JayG17 Member

JayG17

Posted
  • Author
Posted
11 hours ago, watchweasol said:

Hi Watch-O-scope is a PC  oriented timgrapher software, available for download in its lite form the full licence is $40 lifetime , You to need to build a stand and amplifier. Have a look at it might be worth the effort.  the developer is a contributor and runs the site Vintage Watch Straps on which the is a wealth on information.      http://www.watchoscope.com/.

Thank you sir great information.  Will check out 

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Hello Everyone!

      By RichardHarris123 · Posted

      Hello and welcome from Leeds,England.  Ask away. 
    • oldhippy
      Winding pinion making

      By oldhippy · Posted

      What cutter are you using can you video the action 
    • oldhippy
      Hello Everyone!

      By oldhippy · Posted

      Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • JohnR725
      Notifications

      By JohnR725 · Posted

      if you're trying to keep track of conversations scattered all over the message board emails are an absolute must.   looking at the bell icon on the top of the page versus the emails today it looks like I got the correct amount of emails. So making some minor change based on the one of the images up above I started getting notifications again. But at times I still have a suspicion that something isn't quite right. I have some feeling that the message board may delay sending emails until something so seems to be a long delay between when you get your emails just a weird feeling things aren't quite right oh  and then even though I do seem to be getting emails I no longer get notifications of personal messages I don't find that out until I arrived at the message board where I'm pretty sure I used to get notifications of those two. So something is definitely changed on the message board. then for everyone not getting emails you do want to check your spam folder. I have found that sometimes were open up an email the system I use warns me that it thinks the email is evil and bad and I have no idea why he thinks some of the emails are and some are not. But this is actually the program I use not the email system which also has a mind of its own as to what it considers spam so you should always check your spam folder.
    • JonC
      Can anyone identify what this is? Part Two

      By JonC · Posted

      Thank you.
×
×
  • Create New...