Jump to content

Looking for mineral glass to Fortis Flieger


Recommended Posts

Hi!

I've recently purchased a Fortis flieger 595.x.x and I'm looking for a new mineral glass. I've messaured the size or the old glass and it is around 36.43 mm diameter and 1.7 mm thick. 

 

Where can I find a glass with this size for a good Price? 

Best regards 

Markus 

Link to comment
Share on other sites

23 hours ago, bjerre said:

I've recently purchased a Fortis flieger 595.x.x and I'm looking for a new mineral glass. I've messaured the size or the old glass and it is around 36.43 mm diameter and 1.7 mm thick. 

You have posted about this already and got a good answer.

 

Link to comment
Share on other sites

8 hours ago, oldhippy said:

Try any watch suppliers in your country. If you go to resources at the top of the page, you will find a list of suppliers for your country.

Hi!

I never got any recommendations on where to find it except via Fortis. They denied sending me a glass since they only provide spare parts to professional watch makers. 

I forgot that I posted about this before so my bad, however the old Post was more related on how to messaure the size of the glass rather than where to find a brand new.

Link to comment
Share on other sites

28 minutes ago, bjerre said:

I never got any recommendations on where to find it except via Fortis.

OK, the good answer was the recommendation to watch Mark Lovick video to learn how to replace a crystal, you will of course need a crystal press, otherwise bring it to a watch shop where they replace batteries, some are pretty good. And you wrote yourself about Cousins UK, they have excellent assortment prices and service.

Link to comment
Share on other sites

15 hours ago, jdm said:

OK, the good answer was the recommendation to watch Mark Lovick video to learn how to replace a crystal, you will of course need a crystal press, otherwise bring it to a watch shop where they replace batteries, some are pretty good. And you wrote yourself about Cousins UK, they have excellent assortment prices and service.

I thought this was a forum where we try to fix and service watches by ourselves. This is my intention as well.

I have already bought a watch press and were able to remove the scratched crystal and found out that previous dimensions didn't match with mine.

Regarding Cousins UK I've heard great stuff about them as well. However, the size that I needed could not be found on their site. It seems like it's really hard to find specific sizes made for certain brands like Fortis.

I will most likely buy an original glass instead to be certain that it will fit my watch.

Thanks for your help!

Link to comment
Share on other sites

1 hour ago, bjerre said:

However, the size that I needed could not be found on their site. It seems like it's really hard to find specific sizes made for certain brands like Fortis.

Cousins UK has 2mm x 36.4 sapphire or 1.8mm mineral. Either are a good replacement. Flat round is the easiest type, even found on Ebay, AliX, etc. 

Link to comment
Share on other sites

On 7/28/2019 at 1:21 PM, jdm said:

Cousins UK has 2mm x 36.4 sapphire or 1.8mm mineral. Either are a good replacement. Flat round is the easiest type, even found on Ebay, AliX, etc. 

Awesome! thanks for your help!

Link to comment
Share on other sites

  • 2 weeks later...
On 7/28/2019 at 1:21 PM, jdm said:

Cousins UK has 2mm x 36.4 sapphire or 1.8mm mineral. Either are a good replacement. Flat round is the easiest type, even found on Ebay, AliX, etc. 

I ended up buying the original glass and replace it myself. Got it for an OK price as well so all good now :)
Here's a pic: GB6grIS.jpg

Edited by bjerre
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Right now I'm making do with a similar micrometer (the one below is $45 shipped but you can find better deals) and a $20 stand. You do have to be excruciatingly careful measuring jewels, since there's no table, but if you don't have the $500 to throw around, it's a nice option.
    • As  I kid, I'd watch Godzilla stomping over buildings and cars and I'd think to myself: Tokyo is a really dangerous place to live... . Cool watch!!
    • Next one up an AS 554, looks like a bit more to this one. First job is to check thickness, most springs are somewhere between .3 and .4, this one measures .35, that matches in with the .4 spring steel i ordered. So for marking up a permanent marker comes in handy to colour up the steel to be marked later with a scriber once its dry. Bestfit provide the extra bit of info for the jumper spring that is missing.
    • Thanks again, Marc.  Super helpful. I was wondering what the hole was for, and now it makes perfect sense. With your help and the other members here, it looks like I'm good to go with my Seitz tool set. I had to order some replacement pushers, but with those, the set is complete and in good condition. Now, I need to figure out what tool to buy to measure jewels (amongst other watch-related parts). I had my eye on the JKA Feintaster micrometers, but people get crazy bidding on them for $400-600 USD. I was thinking of just a regular digital micrometer (Mitutoyo). Thoughts?  Mahalo. Frank      
    • Yep, that's exactly how it should fit. The reamer shank is tapered and the socket in the spindle is also tapered so that the one centers in the other and is gripped tightly. If there is any wobble when the reamer is seated as far it will go then there is a problem. The cross hole in the spindle is to allow you the push the reamer back out again. If the reamer seated much deeper then it would limit the access for pushing it back out again. Here is one of mine for comparison.
×
×
  • Create New...