Jump to content

Smartwatch


Recommended Posts

I got this smart watch off ebay about 6 weeks ago for blood pressure, heart rate etc. My problem is when I work up a sweat the dial shows up a milky bloom, there is also some spots on the glass inside fungus?? and also what looks like the processor ? over heating??  and shows up when the dial is not showing time etc..I have got a couple of photos to show, best I can get that shows what is actually  happening... I emailed the seller and he said to send some photos which I did he cam back with can I take it to a watch repairer for them to check, surely the cost of fixing if it can be fixed will cost more than the £30 I paid for it..Am I right to say I don't want this watch repaired of replaced and ask for my money back. I know it's only £30 but know this can't be fixed or can it, I know nothing about watches..

Thanks for any help.. Len

IMG_3121.JPG

IMG_3122.JPG

IMG_3131.JPG

IMG_3138.JPG

IMG_3139.JPG

Link to comment
Share on other sites

  • 3 weeks later...
On 6/28/2019 at 1:43 PM, yankeedog said:

Take the back off,set the watch in the sun.inspect gasket or for lack thereof. Replace or properly reinstall.

Hi,

 

Thanks for getting back to me and for the advice, I will try that now. I did not want to take the watch apart in case it invalidates the warranty, but just been informed that there is NO warrany, only for the first 30 days, Chineese rubbish. I know this is not our usual mechanical watches I only got this for the blood pressure and heart rate etc was not expecting them to say no warranty is given, I though all new goods had 1 years warranty..I will not be buying from them again,

 

Thanks again

Len

Link to comment
Share on other sites

  • 1 year later...

Smart watches are the kind of thing that you need to order from the store. And only after you read the reviews on them. On ebey you could slip a defective watch. Unfortunately, this happens. I'd buy new ones if I were you. For example, I have a Michael Kors Sofie Smartwatch. I chose them very carefully and bought them only after reading the review on find your smartwatch. You can certainly fix them, but they will already be bad.

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
×
×
  • Create New...