Jump to content

Howdy from Texas

NeedAG

By NeedAG
in Introduce Yourself Here

 Share

Recommended Posts

NeedAG New Member

NeedAG

Posted
Posted

Howdy from Texas WRT! Been lurking so figured an intro is appropriate. :biggrin:

Been interested in mechanical watches about 6 years. I'm a lume nut and started doing my own relumes as none of my local watchmakers accept lume work!

This led to modding, starting with dial / hand swaps and then light case work (e.g., to remove branding/crown guards from invicta subs). 

Ux6Nfwl.jpg

Became familiar with casing and keyless during this period, and developed an appreciation for Swiss-style movements, particularly the 2824-2 - altho the movement proper was still a mystery.

Eventually a got a Sellita SW200 in need of service and upgrade to the SW200-1 wheels. Watched some videos, vultured a mostly complete Watchmaster ultrasonic from the 'bay... eventually got it working and acquired some fresh oils (amazing what oil costs, until you consider it's about the highest tech in the movement LOL).

With the help of some reading, Mark's videos, and trial & error, the first service went well with the exception of a broken Novodiac spring and a temporarily lost cap jewel. :)

Have been trying to clean/oil a movement per week or so since. Recently retrofitted this Ginault with a Swiss ETA modded to H4 pinions, home-lumed dial and bezel, and roulette date. :)

iXsP2UW.jpg

Cheers and thanks in advance for your help! B)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • AlanB
      Gilding after silver soldering

      By AlanB · Posted

      When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • Neverenoughwatches
      Can anyone identify what this is? Part Two

      By Neverenoughwatches · Posted

      The first one is an Unruh max stake for pushing out staffs
    • JonC
      Can anyone identify what this is? Part Two

      By JonC · Posted

      Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • Zedster
      Roamer Searock Crystal problem

      By Zedster · Posted

      According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
    • JonC
      Dial feet removal

      By JonC · Posted

      When building a new Watch I have tended to use a file to remove the remnants of dial feet that are not needed as many dials come with four feet to accomodate different movements, but this can be a bit messy so now I use this with a great deal more precision as you can use an appropriate bit for the job and keep it very localised.      
×
×
  • Create New...