Jump to content
jdrichard

Anyone know what this tool is?

Recommended Posts

It's a roller remover. That one has a couple of extra inserts, usually it's 3. I think it's a goofy tool for removing rollers but the inserts are probably handy for pulling hands or other odd friction fit pieces. I don't think Bergeon has sold them for 30 years or so.

Share this post


Link to post
Share on other sites

I was looking at this last night roo.

I thought they were lantern chucks for screws, but couldn't figure out its purpose.

The 2 screws on the side of the base and the 2 on the top of the base what is their function?

The top two do not pass through the bottom of the base, as I thought they might of until I saw the other photos.

 

Share this post


Link to post
Share on other sites
3 minutes ago, Tmuir said:

I was looking at this last night roo.

I thought they were lantern chucks for screws, but couldn't figure out its purpose.

The 2 screws on the side of the base and the 2 on the top of the base what is their function?

The top two do not pass through the bottom of the base, as I thought they might of until I saw the other photos.

 

The extra thingies (spindles/runners/chucks whatever) go in the base and are held by the screws. The above tool has two more than normal which throws the logic off.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • It has 'Vaillant a Paria' on the chapter ring I did a search in Goggle and he made high end clocks, one sold for 600,000 at auction and a few others 20,000+ he is also listed in Loomes book. That is why I do not understand the error in the movement. I looked at some of his movements on other clocks and they look the same, however most key holes are in the right place. I think I will contact a high end seller that has one of his clocks for sale to ask if this was one of his, hope I get a reply.
    • Cousinsuk have there own size chart. Which i think is the best. Esslinger have the right one that most other use. U should need a tap 8 crown. As for the crown. older Tissot used a domed crown without logo.    Watch Stem Tap Chart _ mm Size Reference Chart _ Esslinger.com _ Esslinger Watchmaker Supplies Blog.html
    • I get it....and I honestly dont blame them. However theres much more to the story primaruly shitty customer service. The bottom line the price between a tag aquaracer and the Oris TT1 is $0. The reason why I went with the TT1 was its smaller size. With that said this saga has taught me a couple things.......Oris uses a cheaper grade movement and their quality is much less than the TAG do youre better iff with the TAG in the end. For me back then I had no concept of movements etc etc and though each watch manf made everything in house. Had I known then what I know now I wouldnt have purchased the TT1. Hopefully anybody in that same situation may stumble upon this thread and be warned as I was not. Sent from my SM-G950U using Tapatalk
    • Not surprisingly, an ETA 2824-2. https://www.atlantic-watches.ch/en/shop/retro-vintage/worldmaster-original/2355/worldmaster-original?c=80 But a price of RON 125,  or €26 seems too good to be true.
    • What is an "adjustable escapement"? Even the cheapest mov.t can be rate regulated, while adjustment is a sort of obscure art which if you ask about,  you will be told that "starts at the mainspring". Whatever that means 
×
×
  • Create New...