Jump to content

My first balance staff!

gmoodyii
 Share

Recommended Posts

gmoodyii Member

gmoodyii

Posted
Posted

Finally got around to cutting my first successful balance staff. It is for a 201 caliber Jaeger-LeCoultre 8-Day aircraft clock. In fact this is the same clock that got me interested in watch repair as a hobby.

The first attempt resulted in a pivot being cut off while I was finishing it up, it was complete except for the finishing on the last pivot and it just disappeared. That was with wire rod. Second attempt was with blued wire rod, which I should have been using to begin with. Took my time and ended up with a usable staff.

Installed on the balance assembly and it worked!!

 

Balance 2 (3).jpg

  • Like 5
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Finishing the pivot and breaking and flying into no man’s land is common when you start out making staffs. You have achieved what many watch repairs can’t undertake. Congratulations in repairing your aircraft clock.

Jnash there are videos on Youtube about sharpening gravers. It takes practice. When you have achieved that, practice on some brass rod first before steel, as you know brass is softer. I always used a block arkansas stone with a little oil to sharpen my old gravers. Tungsten steel gravers are what I used.

  • Like 1
Link to comment
Share on other sites
gmoodyii Member

gmoodyii

Posted
  • Author
Posted

Thanks for the nice words, cutting a balance staff was one of the things that I really wanted to do successfully. I hope this one is not a fluke because I have another 8 day aircraft clock that needs a balance staff also.

I started using HSS gravers but a local watchmaker let me borrow a set of Barkus carbide gravers. I noticed a big difference in cutting, the Barkus cut the blue steel easily.

He told me I could use them as long as I wanted but they were not for sale, now I know why. They were a pleasure to use.

Cannot wait till I have enough time off work to give it another try. Yep, this is addicting!

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Second hand watch market.

      By Neverenoughwatches · Posted

      Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Albyon
      AS2031-57E solar panel - mission: impossible

      By Albyon · Posted

      Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • Albyon
      Insert the movement inside the case

      By Albyon · Posted

      In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
    • Murks
      2813

      By Murks · Posted

      Yea a have given it a full service this movement is chinese 2813 whats the lift angle for this movement does anyone knows  and how  do a remove the default  of 52 degrees on my timegrapher?   Hi you said my lift angle is default how do a remove this from my timegrapher?
×
×
  • Create New...