Jump to content

Did You Say Oops ?

frenchie
 Share

Recommended Posts

frenchie Distinguished Member

frenchie

Posted
Posted

The idea in the thread is to post your best watch related "Oops" moments (parts in underwear count, you know who you are !!).

 

Here is one of mine :

Not only do I (try to) fix watches, I also make bread. From scratch of course and don't even get me started on bread machines. And I'm NOT in bread country right now... They actually sell rectangular loaves of bread with no crust. NO CRUST !!!! Anyways. So I'm in the middle of a watch disassembly and my buzzer goes on to shape my weekly loaves. I do my bread shaping and get back to the disassembly not noticing that I have a tiny bit of flour on the back of my wrist. That accidently falls into my cleaning lotion (lighter fluid) while I'm swirling it around to clean the balance. All of a sudden I notice that the fluid is no longer transparent, but kind of milky looking... And that I have bits of stuff floating in there... Oh dear... Well let me tell you one thing : wet flour is a pain in the backside to get off watch parts ! it's very fine and sticks like it's glue !!

Lesson learned : Clean your hands AND your wrists before playing with your watches !!

 

Geo Distinguished Member

Geo

Posted
Posted

I don't know if this qualifies for a watch oops moment.............but I did "watch" it happen!

Back in the eighties I was heavily into photography and was asked by a friend who owned his own joinery business to take some pictures of the most ornate and expensive door that they had ever made. I was delighted to have been asked and arranged to take the photos.

The heavy door was brought up to the directors office and laid against the wall to be photographed. I wasn't happy with the way it was positioned, so I asked it to be placed against the wall in such a way as to make it look like the door was open. Looking through the viewfinder I witnessed my worst nightmare, the door sunk slightly into the heavy pile carpet, overbalanced, fell forward and demolished the directors coffee table and took lumps out of the door.......OOPS!

WillFly Distinguished Member

WillFly

Posted
Posted

Back in 1964 I bought my first guitar. It cost me £5 and was probably made of plywood. I got it home, together with my copy of Bert Weedon's "Play In A Day", tuned it up to pitch - and the whole tailpiece snapped and sent the strings flying past my head!

 

"Bugger!" thought I...

Vich Distinguished Member

Vich

Posted
Posted

Hello Will,

 

I started with Bert Weedon, I think playing the Grand Old Duke Of York,  I seem to remember having a plastic attachment for the top of the guitar that you pressed buttons for the chords as well.  I then graduated to Irish Folk Tunes (Tommy Makem and the Clancy Brothers ?) that seemed to require a max of 4 Chords and then I found my level with Status Quo - same four Chords but with my little finger bouncing up and down :rock:  .  Halcyon days, well actually no, they were quite noisy..

 

Cheers,  Vic

  • Like 1
bobm12 Distinguished Member

bobm12

Posted
Posted

Watch related....mmm, does WATCHing my mother-in-law first thing in the morning counts? :D

 

In any case, my first hairspring, when I finished with it, from regular spring it had become a "multiple Breguet overcoil" if you know what I mean!....

mwilkes WRT Addict

mwilkes

Posted
Posted

Re. parts in underwear - recently i was looking at a watch, noticed that the end of the winding stem had broken off. Couldn't find the broken bit anywhere in the watch.

 

 

I found it a little later. Between my teeth. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
    • ColinC
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By ColinC · Posted

      How long had it been without any wind before you first put it on the timegrapher?  Perhaps there was some debris / old lubricant that loosened up while you were waiting to do the 24 hour reading? I recently serviced a Seiko 6319 that immediately after service was absolutely horrible on the timegrapher - 24 hours later (without me doing anything) it was rock solid!  I was a little surprised by this (as I have seen improvements in amplitude after letting it run in but never a watch going from useless to great!). I was suspicious that some dirt must still be in there so I took it apart and cleaned and lubcricated it again and had exactly the same experience - snow storm that after some hours turned into a nice straigh line with good amplitude 🤷‍♂️
    • mbwatch
      Full plate watch, Suitable tool for adjusting & testing pallet stones?

      By mbwatch · Posted

      Yes, I know it was able to run before just enough that everything supposed to be affixed with shellac could fall out. I won't get back to work on this watch for several days at least, but one thing you mentioned about the banking pin adjustments being intended for fork horn clearance got me wondering.... The last adjustment I made to the entry stone yesterday did not solve the problem when the balance is installed. The escape teeth can't quite clear the stone when the balance swings. But I thought it was going to work because manually snapping the fork back and forth did allow the escape wheel to advance almost all the time. I wonder if there's another issue with the impulse jewel, that I have to shellac again anyway. I am going to measure the fork slot and the jewel because I am curious if it is the right size or possibly narrower than it should be. My thinking is if the horn clearance is too great maybe it is not getting enough impulse to clear the escape tooth. But pushing the fork with a tool can move it far enough to clear the escape wheel tooth.  I'll see later in the week. I didn't expect a big challenge from this watch because it ticked for 5 minutes before stopping without shellac. As always I was way wrong.
×
×
  • Create New...