Jump to content

Clock Quiz Made it a bit Easier


oldhippy

Recommended Posts

Here are 5 clock movements. I want the type of movement and the country that they are from. Be careful and study the movements because this is hard. One or two are not so obvious as you might think. With no answers it looks as if it is to hard. So to help you here is the list of countries. France, America, UK, Austria and Germany.

A.jpg

B.jpg

C.jpg

D.jpg

E.jpg

Link to comment
Share on other sites

Well these are my thoughts guesses,

1, I'm not quite sure about this one but I think its a cuckoo clock movement which would I think make it the German movement

2, first thought's it looks like a french striking movement in layout but with none of the quality so maybe a German Hermle but they are mostly floating balance escapements, after a bit of reading I think this is a American Seth Thomas 8 day time and strike movement

3 Austrian or maybe German  striking Vienna regulator movement

4, This is a English Turret clock

5, French Morbier striking clock

Link to comment
Share on other sites

wise1971 you are correct. clockboy you need to know your clock movements, go to the back of the class.:D

A             fusee cuckoo clock          Germany              

B             Seth Thomas                      American

C             Vienna Regulator            Austrian              

D             Turret clock                        UK

E              Morbier Comtoise           French

Looks like i made it to easy.

 

Link to comment
Share on other sites

Well I wouldn't of got any of those correct other than I guessed number 2 looked like a French striking clock, but the quality wasn't there, so was obviously made elsewhere copying a French clock.

I do like it when you post quizzes like this as I do learn quite a bit

Link to comment
Share on other sites

19 minutes ago, Tmuir said:

Well I wouldn't of got any of those correct other than I guessed number 2 looked like a French striking clock, but the quality wasn't there, so was obviously made elsewhere copying a French clock.

I do like it when you post quizzes like this as I do learn quite a bit

That's nice to know. I'll make up another soon.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued there and cant find it on Google. Is there a way out to join the ends? Or an alternative movement to source parts from? 
    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
×
×
  • Create New...