Jump to content

Watchmaking apprentices training

clockboy
 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

 

Find below an interesting article from my local newspaper "re- UK Watchmaking apprenticeships". 

"Watchmaking apprentices training 'by the end of the year' after industry secures top level of government funding"

The UK's first watchmaking apprentices in a generation should be training by the end of the year after a business in the county helped secure government funding for the scheme.
Industry leaders have spent three years developing what will be a one to two-year apprenticeship course, which will be eligible for the maximum £27,000 grant to help pay for training providers, assessors and to incentivise employers.
Matt Bowling, a director at Watchfinder, a pre-owned luxury watch retailer based in Maidstone, has been a key member of the team developing the course under the government's trailblazer partnership, which sees industry professionals design training.

The UK's first watchmaking apprentices in a generation should be training by the end of the year after a business in the county helped secure government funding for the scheme.
Industry leaders have spent three years developing what will be a one to two-year apprenticeship course, which will be eligible for the maximum £27,000 grant to help pay for training providers, assessors and to incentivise employers.
Matt Bowling, a director at Watchfinder, a pre-owned luxury watch retailer based in Maidstone, has been a key member of the team developing the course under the government's trailblazer partnership, which sees industry professionals design training.

The luxury watch market is worth £1 billion in the UK each year and Mr Bowling thinks the pre-owned market is worth "at least as much".
Yet there are few training opportunities for people interested in entering the industry, apart from courses with the British School of Watchmaking in Manchester and a horology degree at Birmingham City University.
Mr Bowling aims to take on two apprentices at Watchfinder once the watchmaking course is formally launched, with potential to hire more as the business grows.
Although a training provider has not yet been appointed for the courses, he hopes it can be made a City and Guilds qualification and is in talks with the body.
He said: "There is a desperate shortage of watchmakers.
"The reason I wanted to get into this is because there is a shortage of training opportunities.
"If you are a good watchmaker you will always find employment and it's well paid."

  • Like 2
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

One to two-year apprenticeship course. Not long enough back in the early 70's it was 5 years apprenticeship and another 2 years as an improver. You could if you so wished serve your improving skills at a different place of work.  I stayed put as my master was going retire and I would have the workshop to myself.

Its nice that a revival is taking place

  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
  • Author
Posted
25 minutes ago, oldhippy said:

One to two-year apprenticeship course. Not long enough back in the early 70's it was 5 years apprenticeship and another 2 years as an improver. You could if you so wished serve your improving skills at a different place of work.  I stayed put as my master was going retire and I would have the workshop to myself.

 

Its nice that a revival is taking place

 

Times (excuse pun) have changed.I served a 5 year printing apprenticeship but now it is a one or two year training due to technology making printing easier with less skill required. However horology still seems to need a great deal of skill & knowledge so maybe 2 years will not be enough.

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
Posted

They offer training courses at my watchmaking school in London. We had many apprentices from Clerkenwell shops turn up for the beginners watch repair course (funded by their employers) but many stopped turning up after a few months, or buggered about when we were meant to be learning.

I'm currently studying for a BHI technician grade course at the moment. They cover more of the overall theory rather than just cleaning and assembling modern watches. A lot of students don't seem interested in the metallurgy and other scientific topics which I thought was odd. Many of them thought the bottom of a flame from a spirit lamp was the hottest point, which makes me worry about the standard of Science education these days.

Link to comment
Share on other sites
BUSAKAZ WRT Addict

BUSAKAZ

Posted
Posted
They offer training courses at my watchmaking school in London. We had many apprentices from Clerkenwell shops turn up for the beginners watch repair course (funded by their employers) but many stopped turning up after a few months, or buggered about when we were meant to be learning.
I'm currently studying for a BHI technician grade course at the moment. They cover more of the overall theory rather than just cleaning and assembling modern watches. A lot of students don't seem interested in the metallurgy and other scientific topics which I thought was odd. Many of them thought the bottom of a flame from a spirit lamp was the hottest point, which makes me worry about the standard of Science education these days.

Hi mate, are you at Epping Forest?


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
Mattaphysics WRT Addict

Mattaphysics

Posted
Posted

I wish we had something like that in U.S. Yeah there's a Patek Phillipe apprenticeship in NYC but you need experience and apply then I think they only pick like one person. There aren't really any watchmakers or a watch shop, at least not in my area. I've looked for apprenticeships on the net but no luck. I would jump at the chance to apprentice.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Bonefixer
      AS2063 - hand setting

      By Bonefixer · Posted

      The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • mthomas828
      Balance staff sourcing?

      By mthomas828 · Posted

      Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • LittleWatchShop
      Movement holder made with 3D printer

      By LittleWatchShop · Posted

      Back home...printing now.  Will report results
×
×
  • Create New...