Jump to content

Auto Oiler

trident

By trident
in Tools & Equipment

 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
Posted

I’m sure there is a thread on here about auto oilers. I think some said they were very good for getting into fiddly places. Myself I’ve never used such things. You could do a search and see what comes up.

oldhippy Distinguished Member

oldhippy

Posted
Posted (edited)

I’ve tried all sorts of things and I have drawn a blank each time.  The search facility on here is very poor. Try google.

Edited by oldhippy
chadders1966 WRT Addict

chadders1966

Posted
Posted

Hi

Those oilers are not meant for working on watches - I tried them myself because of the price but they are not right for the job, lacking precision and leaking a lot. They may be alright for working on larger machinery.

Automatic oilers are one of those things that some use, some don't. They are certainly not essential, but some people find them useful for specific jobs.

Stephen

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • docrpm
      Elgin Grade 315: Runs/stops with dial down/up

      By docrpm · Posted

      Ok. So given that I had free oscillations DU/DD for roughly the same time, I reassembled with the pallet fork and bridge underneath, and now I can see two more problems.    1. The arms of the balance are nearly flush with the pallet bridge. Bad. I can speculate as to why…the end shake still looks to be too much. Maybe other causes as well? 2. The balance doesn’t spin freely. In the resting position, it looks like the impulse jewel is outside the jaws of the pallet fork. Not by much, but still outside. If it needs be inside in the static position, then I’m guessing I’ll need to rotate my hairspring collet to change orientation by a few degrees.    The journey continues…
    • stm
      Doxa women's watch (radioactive)

      By stm · Posted

      Ok, that's good to know, thank you.
    • Michalzeszen
      ETA 2472 - how to tackle this crown and stem?

      By Michalzeszen · Posted

      Andy, why you betray me?   I may have good news. I'll share later!
    • Stefango
      Somewhat as reward

      By Stefango · Posted

      Hi. I have been touching watches for quite some years, but haven’t before pretty recently decided to jump of the cliff by trying to do basic service for the first time. It is a simple Seiko 6602 I bought as a renovation movement.  To be honest I struggled. Mainly because I wanted to do everything correctly and with all the right tools etc from the start.  From just having basic tools I invested in quite a lot of things in order to dissemble, clean and lubricate the movement parts. I can say it was a journey.  Taking care of the balance jewels looks really easy watching all the great videos, but god damn… I have been lucky and only shot away things that was found but come on. Anyway. I have now managed to “service” four movements and the result is what makes me want to keep doing this.    The first movement was a Seiko 6602 and it was in a pretty bad shape. When I run it on the Timegraoher now I got an amplitude of 270 and in all positions it stays around +-2s.    I have heard some “amateurs” saying this is a hobby you’ll get stuck to and I am already there. It doesn’t matter if it’s a fancy movement or a simple 6602. The feeling after been struggling and you see the result… it’s amazing! I am still in a state where I am confused and don’t know which watch press tool is best, or if I need the most fancy hand tools etc, but to be honest. This is so stimulating.    Sorry for not really adding anything new to you all pros. 
    • AndyGSi
      casio md-522

      By AndyGSi · Posted

      Casio normally put the movement number of the case back. Edit So it's a 709 Module (as Casio call then) you're looking for.
×
×
  • Create New...