movement dust covers

[TimFitz]

I have bought a couple of those  blue plastic movement & parts holders in the past. They are very cheap on the net. My problem is that the covers don't fit very well if you bump them it falls off with parts scattered. Are some better than others, or are they all very much the same?

Perhaps someone here has a better solution to storing disassembled watch parts?

Thanks

[rogart63]

Have a few i bought from Ebay. The round ones with a cover. Not the cheapest ones as they are really bad. cousinsuk have them also. think there is an old thread on the forum about it? 

[oldhippy]

A glass turned up side down is what I used, the sort of thing when the stem gets knocked off or broken.

[dadistic]

I like these -

https://www.cousinsuk.com/product/trays-watch-disassembly-assembly

You can even lock the cover with a key.  I got tired of scattered parts 

 

[Neileg]

I use snap fit food containers that cost about a pound in the supermarket. Not as good as compartmented storage but the lid won't come off if dropped or even kicked!

Cheers Neil

 

 

Sent from my iPhone using Tapatalk