Jump to content

Yorkist

yorkist

By yorkist
in Introduce Yourself Here

 Share

Recommended Posts

yorkist New Member

yorkist

Posted
Posted

Hi everybody, I have been browsing this forum for a few months, I suppose just to keep up with the trade, anyway I have found it very interesting I didn't realise there were so many amateurs with such a great span of knowledge.  I left the trade in the 80's when quartz watches were destroying the repair trade, I never considered returning to it as I was settled doing other things, I never lost my love of watches.  I once worked for the firm that imported "Sicura" watches in Clerkenwell as a "Trade" worker repairing guarantee watches at home, this entailed finding out what was wrong and putting it right, it could be a broken balance staff, button and stem or glass anything in fact. I would be given huge parcels of spare parts and told to get on with it.  I used to repair about 200 watches a week for which I received 33p per watch, it was a good living in those days but came to an end during the postal strike in the 70's.  When I stopped trade work I was charging £1.80 for a COH (clean and overhaul) for a normal jewelled lever or pin pallet and £2.50 for an automatic, competition was fierce in those days and you had to keep your prices low.  A few years ago I was offered £25.00 a watch for a COH but it meant setting up a workshop again, so I didn't bother, I even threw away my old cleaning machine when I moved to France (which I regret now).  Now I've bored everyone to death I'll finish and just to say If I can ever help anybody I would only be too pleased.  Thanks to Mark for this site and the brilliant videos which I have enjoyed immensely.

  • Like 2
oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello and welcome. A very interesting introduction. When I started back in the  70's we charged £2. 50 for a clean and £5.00 for an auto. I've been retired for years my eyes aren't very good thanks to diabetes.  

  • Like 1
dadistic Distinguished Member

dadistic

Posted
Posted

Greetings and Salutations!

In trying to figure how long you might spend on each watch, I'm coming up with 15 minutes! Is that even close? Blindingly fast for a cleaning and overhaul!

Glad to see you here.

  • Like 1
Cad101 Super WRT Addict

Cad101

Posted
Posted

Hello and welcome Yorkist. I'm  sure your expertise will come in very usrful here. Now Yorkist is that because you like Yorkie chocolate bars you come from York your second names York or you play cricket sorry its one of my pet games trying to work out why people call themselves what they do.

  • Like 1
Khronos Member

Khronos

Posted
Posted

Welcome Yorkist, wow, 200 watches a week!  That's amazing!  Well, I think you should get back into the business.  LOL!  Thanks for the great intro.  I enjoyed the read.  Take care.

  • Like 1
yorkist New Member

yorkist

Posted
  • Author
Posted

Thanks for the very warm welcome, the 200 watches a week were not cleans they were just to get the watch going sometimes all you had to do was take the back off pick a screw out of the movement where it had got lodged put it back into the right place and that was it finished.  You have to remember that after the watch was sold and something went wrong the customer would have to send the watch back under guarantee and enclose a 10 shilling or 50p admin fee which of course was to pay for the repair and so the customer unwittingly was paying for the repair. 

Sorry to hear about your eyes Old Hippy, so terrible when you have had a career doing such fine work.

Well Cad101 none of your suppositions are correct, I was born in Sheffield (by accident) was brought up in Manchester, got married in London then lived the rest of my life in Northampton. The Yorkist comes from my love of medieval history especially the "Wars of the Roses" and my fascination with Richard iii.  Again I'm in danger of sending readers to sleep, Thanks again,

Eddie

Vich Distinguished Member

Vich

Posted
Posted

Hello Yorkist and welcome,

I enjoyed reading your intro and especially the charges and workload info. Sicura watches crop up here every now and then. All that experience you have amassed is bound to help someone out on the forum. Looking forward to your postings.

Cheers,

Vic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tonydagee
      Calendar work certina 25-651

      By tonydagee · Posted

      Hello all, just disassembling to service, but I can’t figure out the working of the calendar work…it’s not operational the jumper and spring are ok, but the operation of the driving wheel has me at a loss. I can’t see a cam to drive anything. Is something damaged or missing? Help please!
    • tIB
      Unusual Seiko dial damage

      By tIB · Posted

      Believe the relume (not a fan) was done a long time after the damage. 
    • Malocchio
      Unusual Seiko dial damage

      By Malocchio · Posted

      I can only think of some chemical reaction to reluming
    • nickelsilver
      A lathe with indexing that won't break the bank?

      By nickelsilver · Posted

      I have a little milling attachment for my WW lathe, but very rarely use it and not for wheel and pinion cutting. For that I use a small Sixis 101 milling machine. I normally do direct dividing, but sometimes have to do an odd count and use the universal index which also fits on the Sixis.   Back in the day when I didn't have a mill, I would cut gearing on my Schaublin 102. It has a universal dividing attachment which fits the back of the spindle. Both it and the one for the Sixis are 60:1 ratio, and with the set of 4  index plates I can do almost any division. When I've had to do a strange high count prime number, I print a disc with the needed division and just place the plunger on the dot. Any position error is reduced by a factor of 60 so still plenty accurate.   The machines are a mess in the pics as I'm in the process of making a batch of barrels for a wristwatch 🙃.   This is the Sixis. The head can also be placed vertically, as can the dividing spindle.   Dividing plates. The smaller ones fit another dividing spindle.   Universal divider for the Sixis. I put it together with parts from an odd Sixis spindle that takes w20 collets, like the Schaublin 102, and a dividing attachment from a Schaublin mill.     The dividing attachment for the 102. The gear fits in place of the handwheel at the back of the headstock.   And the little milling attachment for the WW lathe. I just set it on the slide rest to illustrate the size, you can see from the dust on it it really doesn't get used much. I think only when I change bearing in the head, to kiss the collet head seat (grinding wheel still in the milling attachment).
    • SidKop
      Opinions on Seiko's 4R and 6R movement quality from those more able to judge

      By SidKop · Posted

      I read a lot about the quality (or lack thereof) of Seiko's 4R, 6R, 8L  movements...or more specifically the lack of regulation from the factory. Especially when compared to similar priced manufactures using SW200's or ETA's. I thought I'd ask those more in the know, do the 4R's and 6R's deserve their bad reputation, is it fairly easy for someone with minimal skills (or better yet a trained watch mechanic) to dial in these movements to a more acceptable performance.    For background I spent more on a 1861 Speedy years ago, expecting that the advertised 0-15s/d  would probably perform more like 5-7s/d. In reality it's been closed to 2-4s/d. 
×
×
  • Create New...